instruction storage exception handling
Christophe Leroy
christophe.leroy at csgroup.eu
Wed Oct 27 16:51:44 AEDT 2021
Le 27/10/2021 à 07:25, Nicholas Piggin a écrit :
> Excerpts from Christophe Leroy's message of October 27, 2021 3:00 pm:
>>
>>
>> Le 27/10/2021 à 06:10, Nicholas Piggin a écrit :
>>> Excerpts from Jacques de Laval's message of October 26, 2021 6:07 am:
>>>> Hi,
>>>>
>>>> We are trying to upgrade kernel from 5.10 to 5.14.11. We have a Freescale/NXP
>>>> T1023 SOC with two e5500 cores, and are running in 32-bit mode:
>>>>
>>>> CONFIG_PPC32=y
>>>> # CONFIG_PPC64 is not set
>>>>
>>>> #
>>>> # Processor support
>>>> #
>>>> # CONFIG_PPC_BOOK3S_32 is not set
>>>> CONFIG_PPC_85xx=y
>>>> # CONFIG_PPC_8xx is not set
>>>> # CONFIG_40x is not set
>>>> # CONFIG_44x is not set
>>>> CONFIG_GENERIC_CPU=y
>>>> # CONFIG_E5500_CPU is not set
>>>> # CONFIG_E6500_CPU is not set
>>>> CONFIG_E500=y
>>>> CONFIG_PPC_E500MC=y
>>>> CONFIG_PPC_FPU_REGS=y
>>>> CONFIG_PPC_FPU=y
>>>> CONFIG_FSL_EMB_PERFMON=y
>>>> CONFIG_FSL_EMB_PERF_EVENT=y
>>>> CONFIG_FSL_EMB_PERF_EVENT_E500=y
>>>> CONFIG_BOOKE=y
>>>> CONFIG_FSL_BOOKE=y
>>>> CONFIG_PPC_FSL_BOOK3E=y
>>>> CONFIG_PTE_64BIT=y
>>>> CONFIG_PHYS_64BIT=y
>>>> CONFIG_PPC_MMU_NOHASH=y
>>>> CONFIG_PPC_BOOK3E_MMU=y
>>>> # CONFIG_PMU_SYSFS is not set
>>>> CONFIG_SMP=y
>>>> CONFIG_NR_CPUS=2
>>>> CONFIG_PPC_DOORBELL=y
>>>> # end of Processor support
>>>>
>>>> We compile using 32-bit Bootlin PPC toolchain:
>>>>
>>>> powerpc-e500mc glibc bleeding-edge 2020.08-1.
>>>>
>>>> When booting, and starting PID 1 we sometimes get a hang. Nothing but our init
>>>> process is running, and for debugging purposes our init currently looks like
>>>> this:
>>>>
>>>> int main(int argc, char *argv[]){
>>>> for (int i = 0; ; i++) {
>>>> FILE *fp = fopen("/dev/kmsg", "w");
>>>> if (fp) {
>>>> fprintf(fp, "%d\n", i);
>>>> fclose(fp);
>>>> }
>>>> sleep(1);
>>>> }
>>>> return 0;
>>>> }
>>>>
>>>> When the hangup occur we don't get any output at all from our PID 1.
>>>> The last output is from the kernel:
>>>>
>>>> Run /sbin/init as init process
>>>> with arguments:
>>>> /sbin/init
>>>> with environment:
>>>> HOME=/
>>>> TERM=linux
>>>> kgdboc=ttyS0,115200
>>>>
>>>> When issuing a backtrace on all active cpus we can see that the kernel is
>>>> handling an instruction storage exception:
>>>>
>>>> sysrq: Show backtrace of all active CPUs
>>>> sysrq: CPU0:
>>>> CPU: 0 PID: 1 Comm: init Not tainted 5.14.11 #1
>>>> NIP: c02aac78 LR: c02aac2c CTR: 00000000
>>>> REGS: c1907d40 TRAP: 0500 Not tainted (5.14.11)
>>>> MSR: 00029002 <CE,EE,ME> CR: 82244284 XER: 20000000
>>>> GPR00: 0000000f c1907e20 c1910000 0065a000 000001d0 01100cca c1907e84 0000000c
>>>> GPR08: d39a8000 000001d3 0000000c c1907f10 42244284 00000000 00740514 bfb71670
>>>> GPR16: 007040e6 00701418 b7c1a5f0 00702f18 00000000 bfb71690 0000fff1 b7c1c478
>>>> GPR24: 00708558 00701698 d3994040 00029002 c1907f20 0065a238 00000355 d39a2790
>>>> NIP [c02aac78] handle_mm_fault+0xf8/0x11f0
>>>> LR [c02aac2c] handle_mm_fault+0xac/0x11f0
>>>> Call Trace:
>>>> [c1907e20] [c02aac10] handle_mm_fault+0x90/0x11f0 (unreliable)
>>>> [c1907ec0] [c003078c] ___do_page_fault+0x26c/0x780
>>>> [c1907ef0] [c0030cd4] do_page_fault+0x34/0x100
>>>> [c1907f10] [c0000988] InstructionStorage+0x108/0x120
>>>> --- interrupt: 400 at 0x65a238
>>>> NIP: 0065a238 LR: 0052f26c CTR: 0052f260
>>>> REGS: c1907f20 TRAP: 0400 Not tainted (5.14.11)
>>>> MSR: 0002d002 <CE,EE,PR,ME> CR: 42242284 XER: 00000000
>>>> GPR00: b7be9914 bfb71620 b7c203a0 8c008000 0070400d b7c182a0 000b8260 0052f260
>>>> GPR08: 0047d448 0052f260 0000000a 00000003 42242284 00000000 00740514 bfb71670
>>>> GPR16: 007040e6 00701418 b7c1a5f0 00702f18 00000000 bfb71690 0000fff1 b7c1c478
>>>> GPR24: 00708558 00701698 00700000 00000015 b7c1c2b0 00707e20 b7c1b8a8 bfb71660
>>>> NIP [0065a238] 0x65a238
>>>> LR [0052f26c] 0x52f26c
>>>> --- interrupt: 400
>>>> Instruction dump:
>>>> 60a500c0 811f0020 57aa6cfa 813f0000 57a30026 809f004c 81080024 7d29e850
>>>> 90a1002c 5529a33e 93c10038 7d244a14 <90610034> 7d485215 91210030 41c203dc
>>>>
>>>> We have also observed that the CPU is continuously servicing the same interrupt
>>>> (north of 140k times per sec), it is not deadlocked.
>>>>
>>>> We have not yet been able to reproduce this behavior under QEMU system
>>>> emulation.
>>>>
>>>> When bisecting between 5.10 and 5.14.11 we can see that this behavior started
>>>> with commit a01a3f2ddbcda83e8572787c0ec1dcbeba86915a:
>>>>
>>>> powerpc: remove arguments from fault handler functions
>>>
>>> Thank you for the excellent work to investigate and report this.
>>>
>>>>
>>>> Our best guess that the instruction storage exception is not properly handled
>>>> and the kernel is never able to recover from the page fault, but we don't
>>>> really know how to proceed. Does anyone have any suggestions or insights?
>>>
>>> Before my patch, zero was passed to the page fault error code, after
>>> my patch it passes the contents of ESR SPR.
>>>
>>> It looks like the BookE instruction access interrupt does not set ESR
>>> (except for BO interrupts maybe?) so you're getting what was in the ESR
>>> register from a previous interrupt, and maybe if that was a store then
>>> access_error won't cause a segfault because is_exec is true so that
>>> test bails out early, then it might just keep retrying the interrupt.
>>>
>>> That could explain why you don't always see the same thing.
>>>
>>> Now previous code still saved ESR in regs->esr/dsisr for some reason.
>>> I can't quite see why that should have been necessary though. Does
According to the e500 Reference Manual, on ISI:
BO is set if the instruction fetch caused a byte-ordering exception;
otherwise cleared. *All* other defined ESR bits are *cleared*.
Christophe
>>> this patch solve it for you?
>>>
>>> Thanks,
>>> Nick
>>> --
>>>
>>>
>>> diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
>>> index e5503420b6c6..0e7cdc8716eb 100644
>>> --- a/arch/powerpc/kernel/head_booke.h
>>> +++ b/arch/powerpc/kernel/head_booke.h
>>> @@ -467,10 +467,11 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
>>>
>>> #define INSTRUCTION_STORAGE_EXCEPTION \
>>> START_EXCEPTION(InstructionStorage) \
>>> - NORMAL_EXCEPTION_PROLOG(0x400, INST_STORAGE); \
>>> - mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
>>> + NORMAL_EXCEPTION_PROLOG(0x400, INST_STORAGE); \
>>> + li r5,0; \
>>> + mfspr r5,SPRN_ESR; /* Store 0 in regs->esr (dsisr) */ \
>>
>> I can't see how that can help, you set r5 to 0 and immediately after you
>> reload ESR into r5 so you are still saving garbage into _ESR(r11)
>>
>
> Oops, stupid mistake.
>
> Thanks,
> Nick
>
> diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
> index e5503420b6c6..094c9790a490 100644
> --- a/arch/powerpc/kernel/head_booke.h
> +++ b/arch/powerpc/kernel/head_booke.h
> @@ -467,10 +467,10 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
>
> #define INSTRUCTION_STORAGE_EXCEPTION \
> START_EXCEPTION(InstructionStorage) \
> - NORMAL_EXCEPTION_PROLOG(0x400, INST_STORAGE); \
> - mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
> + NORMAL_EXCEPTION_PROLOG(0x400, INST_STORAGE); \
> + li r5,0; /* Store 0 in regs->esr (dsisr) */ \
> stw r5,_ESR(r11); \
> - stw r12, _DEAR(r11); /* Pass SRR0 as arg2 */ \
> + stw r12, _DEAR(r11); /* Set regs->dear (dar) */ \
> prepare_transfer_to_handler; \
> bl do_page_fault; \
> b interrupt_return
>
More information about the Linuxppc-dev
mailing list