[PATCH 1/2] eeh: Small refactor of eeh_handle_normal_event

[Daniel Axtens]

The control flow of eeh_handle_normal_event is a bit tricky.

Break out one of the error handling paths - rather than be in
an else block, we'll make it part of the regular body of the
function and put a 'goto out;' in the true limb of the if.

Signed-off-by: Daniel Axtens <dja at axtens.net>

---

This doesn't really make things that much simpler to comprehend
by itself but it makes the next patch a bit cleaner.
---
 arch/powerpc/kernel/eeh_driver.c | 69 ++++++++++++++++----------------
 1 file changed, 35 insertions(+), 34 deletions(-)

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 3eff6a4888e7..cb3ac555c944 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -1054,45 +1054,46 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
 		}
 
 		pr_info("EEH: Recovery successful.\n");
-	} else  {
-		/*
-		 * About 90% of all real-life EEH failures in the field
-		 * are due to poorly seated PCI cards. Only 10% or so are
-		 * due to actual, failed cards.
-		 */
-		pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"
-		       "Please try reseating or replacing it\n",
-			pe->phb->global_number, pe->addr);
+		goto out;
+	}
 
-		eeh_slot_error_detail(pe, EEH_LOG_PERM);
+	/*
+	 * About 90% of all real-life EEH failures in the field
+	 * are due to poorly seated PCI cards. Only 10% or so are
+	 * due to actual, failed cards.
+	 */
+	pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n"
+		"Please try reseating or replacing it\n",
+		pe->phb->global_number, pe->addr);
 
-		/* Notify all devices that they're about to go down. */
-		eeh_set_channel_state(pe, pci_channel_io_perm_failure);
-		eeh_set_irq_state(pe, false);
-		eeh_pe_report("error_detected(permanent failure)", pe,
-			      eeh_report_failure, NULL);
+	eeh_slot_error_detail(pe, EEH_LOG_PERM);
 
-		/* Mark the PE to be removed permanently */
-		eeh_pe_state_mark(pe, EEH_PE_REMOVED);
+	/* Notify all devices that they're about to go down. */
+	eeh_set_channel_state(pe, pci_channel_io_perm_failure);
+	eeh_set_irq_state(pe, false);
+	eeh_pe_report("error_detected(permanent failure)", pe,
+		      eeh_report_failure, NULL);
 
-		/*
-		 * Shut down the device drivers for good. We mark
-		 * all removed devices correctly to avoid access
-		 * the their PCI config any more.
-		 */
-		if (pe->type & EEH_PE_VF) {
-			eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
-			eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
-		} else {
-			eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
-			eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+	/* Mark the PE to be removed permanently */
+	eeh_pe_state_mark(pe, EEH_PE_REMOVED);
 
-			pci_lock_rescan_remove();
-			pci_hp_remove_devices(bus);
-			pci_unlock_rescan_remove();
-			/* The passed PE should no longer be used */
-			return;
-		}
+	/*
+	 * Shut down the device drivers for good. We mark
+	 * all removed devices correctly to avoid access
+	 * the their PCI config any more.
+	 */
+	if (pe->type & EEH_PE_VF) {
+		eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
+		eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+	} else {
+		eeh_pe_state_clear(pe, EEH_PE_PRI_BUS, true);
+		eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+
+		pci_lock_rescan_remove();
+		pci_hp_remove_devices(bus);
+		pci_unlock_rescan_remove();
+		/* The passed PE should no longer be used */
+		return;
 	}
 
 out:
-- 
2.25.1