[PATCH 00/22] PCI: Unify PCI error response checking
Naveen Naidu
naveennaidu479 at gmail.com
Tue Oct 12 04:35:47 AEDT 2021
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error. There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.
This patch series adds PCI_ERROR_RESPONSE definition and other helper
defintion SET_PCI_ERROR_RESPONSE and RESPONSE_IS_PCI_ERROR and uses it
where appropriate to make these checks consistent and easier to find.
This helps unify PCI error response checking and make error check
consistent and easier to find.
Patch 1:
- Adds the PCI_ERROR_RESPONSE and other related defintions
- All other patches are dependent on this patch. This patch needs to
be applied first, before the others
Patch 2 - 13
- Uses SET_PCI_ERROR_RESPONSE() when device is not found
Patch 14 - 19
- Uses RESPONSE_IS_PCI_ERROR() to check the reads from hardware
Patch 20 - 22
- Edits the comments to include PCI_ERROR_RESPONSE alsong with
0xFFFFFFFF, so that it becomes easier to grep for faulty hardware
reads.
Thanks,
Naveen
Naveen Naidu (22):
[PATCH 1/22] PCI: Add PCI_ERROR_RESPONSE and it's related defintions
[PATCH 2/22] PCI: Unify PCI error response checking
[PATCH 3/22] PCI: thunder: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 4/22] PCI: iproc: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 5/22] PCI: mediatek: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 6/22] PCI: exynos: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 7/22] PCI: histb: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 8/22] PCI: kirin: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 9/22] PCI: aardvark: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 10/22] PCI: mvebu: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 11/22] PCI: altera: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 12/22] PCI: rcar: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 13/22] PCI: rockchip: Use SET_PCI_ERROR_RESPONSE() when device not found
[PATCH 14/22] PCI/ERR: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 15/22] PCI: vmd: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 16/22] PCI: pciehp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 17/22] PCI/DPC: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 18/22] PCI/PME: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 19/22] PCI: cpqphp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
[PATCH 20/22] PCI: keystone: Use PCI_ERROR_RESPONSE to specify hardware error
[PATCH 21/22] PCI: hv: Use PCI_ERROR_RESPONSE to specify hardware read error
[PATCH 22/22] PCI: xgene: Use PCI_ERROR_RESPONSE to specify hardware error
drivers/pci/access.c | 22 ++++++++++-----------
drivers/pci/controller/dwc/pci-exynos.c | 2 +-
drivers/pci/controller/dwc/pci-keystone.c | 4 ++--
drivers/pci/controller/dwc/pcie-histb.c | 2 +-
drivers/pci/controller/dwc/pcie-kirin.c | 2 +-
drivers/pci/controller/pci-aardvark.c | 8 ++++----
drivers/pci/controller/pci-hyperv.c | 2 +-
drivers/pci/controller/pci-mvebu.c | 4 ++--
drivers/pci/controller/pci-thunder-ecam.c | 20 +++++++++----------
drivers/pci/controller/pci-thunder-pem.c | 2 +-
drivers/pci/controller/pci-xgene.c | 8 ++++----
drivers/pci/controller/pcie-altera.c | 2 +-
drivers/pci/controller/pcie-iproc.c | 2 +-
drivers/pci/controller/pcie-mediatek.c | 4 ++--
drivers/pci/controller/pcie-rcar-host.c | 2 +-
drivers/pci/controller/pcie-rockchip-host.c | 2 +-
drivers/pci/controller/vmd.c | 2 +-
drivers/pci/hotplug/cpqphp_ctrl.c | 4 ++--
drivers/pci/hotplug/pciehp_hpc.c | 10 +++++-----
drivers/pci/pci.c | 10 +++++-----
drivers/pci/pcie/dpc.c | 4 ++--
drivers/pci/pcie/pme.c | 4 ++--
drivers/pci/probe.c | 10 +++++-----
include/linux/pci.h | 9 +++++++++
24 files changed, 75 insertions(+), 66 deletions(-)
--
2.25.1
More information about the Linuxppc-dev
mailing list