[PATCH RFC 1/4] mm: percpu: Generalize percpu related config
Kefeng Wang
wangkefeng.wang at huawei.com
Sun Nov 21 20:35:54 AEDT 2021
The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs,
which has duplicate definitions on platforms that subscribe it.
Move them into mm, drop these redundant definitions and instead
just select it on applicable platforms.
Signed-off-by: Kefeng Wang <wangkefeng.wang at huawei.com>
---
arch/arm64/Kconfig | 20 ++++----------------
arch/ia64/Kconfig | 9 ++-------
arch/mips/Kconfig | 10 ++--------
arch/powerpc/Kconfig | 17 ++++-------------
arch/riscv/Kconfig | 10 ++--------
arch/sparc/Kconfig | 12 +++---------
arch/x86/Kconfig | 17 ++++-------------
mm/Kconfig | 12 ++++++++++++
8 files changed, 33 insertions(+), 74 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c4207cf9bb17..4ff73299f8a9 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1135,6 +1135,10 @@ config NUMA
select GENERIC_ARCH_NUMA
select ACPI_NUMA if ACPI
select OF_NUMA
+ select HAVE_SETUP_PER_CPU_AREA
+ select NEED_PER_CPU_EMBED_FIRST_CHUNK
+ select NEED_PER_CPU_PAGE_FIRST_CHUNK
+ select USE_PERCPU_NUMA_NODE_ID
help
Enable NUMA (Non-Uniform Memory Access) support.
@@ -1151,22 +1155,6 @@ config NODES_SHIFT
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accommodate various tables.
-config USE_PERCPU_NUMA_NODE_ID
- def_bool y
- depends on NUMA
-
-config HAVE_SETUP_PER_CPU_AREA
- def_bool y
- depends on NUMA
-
-config NEED_PER_CPU_EMBED_FIRST_CHUNK
- def_bool y
- depends on NUMA
-
-config NEED_PER_CPU_PAGE_FIRST_CHUNK
- def_bool y
- depends on NUMA
-
source "kernel/Kconfig.hz"
config ARCH_SPARSEMEM_ENABLE
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 1e33666fa679..703952819e10 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -32,6 +32,7 @@ config IA64
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE if (!ITANIUM)
select HAVE_FUNCTION_TRACER
+ select HAVE_SETUP_PER_CPU_AREA
select TTY
select HAVE_ARCH_TRACEHOOK
select HAVE_VIRT_CPU_ACCOUNTING
@@ -88,9 +89,6 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
-config HAVE_SETUP_PER_CPU_AREA
- def_bool y
-
config DMI
bool
default y
@@ -292,6 +290,7 @@ config NUMA
bool "NUMA support"
depends on !FLATMEM
select SMP
+ select USE_PERCPU_NUMA_NODE_ID
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
@@ -311,10 +310,6 @@ config HAVE_ARCH_NODEDATA_EXTENSION
def_bool y
depends on NUMA
-config USE_PERCPU_NUMA_NODE_ID
- def_bool y
- depends on NUMA
-
config HAVE_MEMORYLESS_NODES
def_bool NUMA
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index de60ad190057..c106a2080877 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2666,6 +2666,8 @@ config NUMA
bool "NUMA Support"
depends on SYS_SUPPORTS_NUMA
select SMP
+ select HAVE_SETUP_PER_CPU_AREA
+ select NEED_PER_CPU_EMBED_FIRST_CHUNK
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option improves performance on systems with more
@@ -2676,14 +2678,6 @@ config NUMA
config SYS_SUPPORTS_NUMA
bool
-config HAVE_SETUP_PER_CPU_AREA
- def_bool y
- depends on NUMA
-
-config NEED_PER_CPU_EMBED_FIRST_CHUNK
- def_bool y
- depends on NUMA
-
config RELOCATABLE
bool "Relocatable kernel"
depends on SYS_SUPPORTS_RELOCATABLE
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index dea74d7717c0..8badd39854a0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -55,15 +55,6 @@ config ARCH_MMAP_RND_COMPAT_BITS_MIN
default 9 if PPC_16K_PAGES # 9 = 23 (8MB) - 14 (16K)
default 11 # 11 = 23 (8MB) - 12 (4K)
-config HAVE_SETUP_PER_CPU_AREA
- def_bool PPC64
-
-config NEED_PER_CPU_EMBED_FIRST_CHUNK
- def_bool y if PPC64
-
-config NEED_PER_CPU_PAGE_FIRST_CHUNK
- def_bool y if PPC64
-
config NR_IRQS
int "Number of virtual interrupt numbers"
range 32 1048576
@@ -240,6 +231,7 @@ config PPC
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE
select HAVE_RSEQ
+ select HAVE_SETUP_PER_CPU_AREA if PPC64
select HAVE_SOFTIRQ_ON_OWN_STACK
select HAVE_STACKPROTECTOR if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
select HAVE_STACKPROTECTOR if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
@@ -254,6 +246,8 @@ config PPC
select MMU_GATHER_RCU_TABLE_FREE
select MODULES_USE_ELF_RELA
select NEED_DMA_MAP_STATE if PPC64 || NOT_COHERENT_CACHE
+ select NEED_PER_CPU_EMBED_FIRST_CHUNK if PPC64
+ select NEED_PER_CPU_PAGE_FIRST_CHUNK if PPC64
select NEED_SG_DMA_LENGTH
select OF
select OF_DMA_DEFAULT_COHERENT if !NOT_COHERENT_CACHE
@@ -659,6 +653,7 @@ config NUMA
bool "NUMA Memory Allocation and Scheduler Support"
depends on PPC64 && SMP
default y if PPC_PSERIES || PPC_POWERNV
+ select USE_PERCPU_NUMA_NODE_ID
help
Enable NUMA (Non-Uniform Memory Access) support.
@@ -672,10 +667,6 @@ config NODES_SHIFT
default "4"
depends on NUMA
-config USE_PERCPU_NUMA_NODE_ID
- def_bool y
- depends on NUMA
-
config HAVE_MEMORYLESS_NODES
def_bool y
depends on NUMA
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 821252b65f89..bf66bcbc5a39 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -334,6 +334,8 @@ config NUMA
select GENERIC_ARCH_NUMA
select OF_NUMA
select ARCH_SUPPORTS_NUMA_BALANCING
+ select USE_PERCPU_NUMA_NODE_ID
+ select NEED_PER_CPU_EMBED_FIRST_CHUNK
help
Enable NUMA (Non-Uniform Memory Access) support.
@@ -349,14 +351,6 @@ config NODES_SHIFT
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accommodate various tables.
-config USE_PERCPU_NUMA_NODE_ID
- def_bool y
- depends on NUMA
-
-config NEED_PER_CPU_EMBED_FIRST_CHUNK
- def_bool y
- depends on NUMA
-
config RISCV_ISA_C
bool "Emit compressed instructions when building Linux"
default y
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 66fc08646be5..a6765e0fe6a8 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -97,6 +97,9 @@ config SPARC64
select PCI_DOMAINS if PCI
select ARCH_HAS_GIGANTIC_PAGE
select HAVE_SOFTIRQ_ON_OWN_STACK
+ select HAVE_SETUP_PER_CPU_AREA
+ select NEED_PER_CPU_EMBED_FIRST_CHUNK
+ select NEED_PER_CPU_PAGE_FIRST_CHUUNK
config ARCH_PROC_KCORE_TEXT
def_bool y
@@ -123,15 +126,6 @@ config AUDIT_ARCH
bool
default y
-config HAVE_SETUP_PER_CPU_AREA
- def_bool y if SPARC64
-
-config NEED_PER_CPU_EMBED_FIRST_CHUNK
- def_bool y if SPARC64
-
-config NEED_PER_CPU_PAGE_FIRST_CHUNK
- def_bool y if SPARC64
-
config MMU
bool
default y
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7399327d1eff..ca120a1f5857 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -239,6 +239,7 @@ config X86
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RELIABLE_STACKTRACE if X86_64 && (UNWINDER_FRAME_POINTER || UNWINDER_ORC) && STACK_VALIDATION
select HAVE_FUNCTION_ARG_ACCESS_API
+ select HAVE_SETUP_PER_CPU_AREA
select HAVE_SOFTIRQ_ON_OWN_STACK
select HAVE_STACKPROTECTOR if CC_HAS_SANE_STACKPROTECTOR
select HAVE_STACK_VALIDATION if X86_64
@@ -252,6 +253,8 @@ config X86
select HAVE_GENERIC_VDSO
select HOTPLUG_SMT if SMP
select IRQ_FORCED_THREADING
+ select NEED_PER_CPU_EMBED_FIRST_CHUNK
+ select NEED_PER_CPU_PAGE_FIRST_CHUNK
select NEED_SG_DMA_LENGTH
select PCI_DOMAINS if PCI
select PCI_LOCKLESS_CONFIG if PCI
@@ -331,15 +334,6 @@ config ARCH_HAS_CPU_RELAX
config ARCH_HAS_FILTER_PGPROT
def_bool y
-config HAVE_SETUP_PER_CPU_AREA
- def_bool y
-
-config NEED_PER_CPU_EMBED_FIRST_CHUNK
- def_bool y
-
-config NEED_PER_CPU_PAGE_FIRST_CHUNK
- def_bool y
-
config ARCH_HIBERNATION_POSSIBLE
def_bool y
@@ -1557,6 +1551,7 @@ config NUMA
depends on SMP
depends on X86_64 || (X86_32 && HIGHMEM64G && X86_BIGSMP)
default y if X86_BIGSMP
+ select USE_PERCPU_NUMA_NODE_ID
help
Enable NUMA (Non-Uniform Memory Access) support.
@@ -2430,10 +2425,6 @@ config ARCH_HAS_ADD_PAGES
config ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
def_bool y
-config USE_PERCPU_NUMA_NODE_ID
- def_bool y
- depends on NUMA
-
menu "Power management and ACPI options"
config ARCH_HIBERNATION_HEADER
diff --git a/mm/Kconfig b/mm/Kconfig
index 28edafc820ad..6bc5d780c51b 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -432,6 +432,18 @@ config NEED_PER_CPU_KM
bool
default y
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+ bool
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+ bool
+
+config USE_PERCPU_NUMA_NODE_ID
+ bool
+
+config HAVE_SETUP_PER_CPU_AREA
+ bool
+
config CLEANCACHE
bool "Enable cleancache driver to cache clean pages if tmem is present"
help
--
2.26.2
More information about the Linuxppc-dev
mailing list