[PATCH net v3] ibmvnic: Continue with reset if set link down failed
Lijun Pan
lijunp213 at gmail.com
Wed May 5 05:31:15 AEST 2021
On Tue, May 4, 2021 at 2:27 PM Lijun Pan <lijunp213 at gmail.com> wrote:
>
> On Tue, May 4, 2021 at 2:14 PM Dany Madden <drt at linux.ibm.com> wrote:
> >
> > When ibmvnic gets a FATAL error message from the vnicserver, it marks
> > the Command Respond Queue (CRQ) inactive and resets the adapter. If this
> > FATAL reset fails and a transmission timeout reset follows, the CRQ is
> > still inactive, ibmvnic's attempt to set link down will also fail. If
> > ibmvnic abandons the reset because of this failed set link down and this
> > is the last reset in the workqueue, then this adapter will be left in an
> > inoperable state.
> >
> > Instead, make the driver ignore this link down failure and continue to
> > free and re-register CRQ so that the adapter has an opportunity to
> > recover.
> >
> > Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
> > Signed-off-by: Dany Madden <drt at linux.ibm.com>
> > Reviewed-by: Rick Lindsley <ricklind at linux.ibm.com>
> > Reviewed-by: Sukadev Bhattiprolu <sukadev at linux.ibm.com>
> > ---
> > Changes in V2:
> > - Update description to clarify background for the patch
> > - Include Reviewed-by tags
> > Changes in V3:
> > - Add comment above the code change
> > ---
> > drivers/net/ethernet/ibm/ibmvnic.c | 11 +++++++++--
> > 1 file changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
> > index 5788bb956d73..9e005a08d43b 100644
> > --- a/drivers/net/ethernet/ibm/ibmvnic.c
> > +++ b/drivers/net/ethernet/ibm/ibmvnic.c
> > @@ -2017,8 +2017,15 @@ static int do_reset(struct ibmvnic_adapter *adapter,
> > rtnl_unlock();
> > rc = set_link_state(adapter, IBMVNIC_LOGICAL_LNK_DN);
> > rtnl_lock();
> > - if (rc)
> > - goto out;
> > +
> > + /* Attempted to set the link down. It could fail if the
> > + * vnicserver has already torn down the CRQ. We will
> > + * note it and continue with reset to reinit the CRQ.
> > + */
> > + if (rc) {
> > + netdev_dbg(netdev,
> > + "Setting link down failed rc=%d. Continue anyway\n", rc);
> > + }
>
> There are other places which check and rely on the return value of
> this function. Your change makes that inconsistent. Can you stop
To be more specific, __ibmvnic_close, __ibmvnic_open both call this
set_link_state.
> posting new versions and soliciting the maintainer to accept it before
> there is material change? There are many ways to make reset
> successful. I think this is the worst approach of all.
>
>
> >
> > if (adapter->state == VNIC_OPEN) {
> > /* When we dropped rtnl, ibmvnic_open() got
> > --
> > 2.18.2
> >
More information about the Linuxppc-dev
mailing list