[PATCH 4/8] CMDLINE: powerpc: convert to generic builtin command line
Daniel Walker
danielwa at cisco.com
Wed Mar 31 04:56:59 AEDT 2021
This updates the powerpc code to use the CONFIG_GENERIC_CMDLINE
option.
This includes a scripted mass convert of the config files to use
the new generic cmdline. There is a bit of a trim effect here.
It would seems that some of the config haven't been trimmed in
a while.
The bash script used to convert is as follows,
if [[ -z "$1" || -z "$2" ]]; then
echo "Two arguments are needed."
exit 1
fi
mkdir $1
cp $2 $1/.config
sed -i 's/CONFIG_CMDLINE=/CONFIG_CMDLINE_BOOL=y\nCONFIG_CMDLINE_PREPEND=/g' $1/.config
make ARCH=$1 O=$1 olddefconfig
make ARCH=$1 O=$1 savedefconfig
cp $1/defconfig $2
rm -Rf $1
Cc: xe-linux-external at cisco.com
Signed-off-by: Ruslan Ruslichenko <rruslich at cisco.com>
Signed-off-by: Ruslan Bilovol <rbilovol at cisco.com>
Signed-off-by: Daniel Walker <danielwa at cisco.com>
---
arch/powerpc/Kconfig | 38 +------------------
arch/powerpc/configs/44x/fsp2_defconfig | 32 ++++++++--------
arch/powerpc/configs/44x/iss476-smp_defconfig | 24 ++++++------
arch/powerpc/configs/44x/warp_defconfig | 17 ++++-----
arch/powerpc/configs/holly_defconfig | 13 ++++---
arch/powerpc/configs/mvme5100_defconfig | 23 +++++------
arch/powerpc/configs/skiroot_defconfig | 12 +++---
arch/powerpc/configs/storcenter_defconfig | 18 ++++-----
arch/powerpc/kernel/prom_init.c | 10 +++--
9 files changed, 74 insertions(+), 113 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 386ae12d8523..3a19e5b74177 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -167,6 +167,8 @@ config PPC
select EDAC_SUPPORT
select GENERIC_ATOMIC64 if PPC32
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_CMDLINE
+ select GENERIC_CMDLINE_OF
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
@@ -886,42 +888,6 @@ config PPC_DENORMALISATION
Add support for handling denormalisation of single precision
values. Useful for bare metal only. If unsure say Y here.
-config CMDLINE
- string "Initial kernel command string"
- default ""
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- most cases you will need to specify the root device here.
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- The command-line arguments provided by the boot loader will be
- appended to the default kernel command string.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-endchoice
-
config EXTRA_TARGETS
string "Additional default image types"
help
diff --git a/arch/powerpc/configs/44x/fsp2_defconfig b/arch/powerpc/configs/44x/fsp2_defconfig
index 8da316e61a08..4993db054589 100644
--- a/arch/powerpc/configs/44x/fsp2_defconfig
+++ b/arch/powerpc/configs/44x/fsp2_defconfig
@@ -1,8 +1,6 @@
-CONFIG_44x=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
-# CONFIG_FHANDLE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@@ -13,23 +11,25 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
+# CONFIG_FHANDLE is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_BPF_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="ip=on rw"
+CONFIG_44x=y
CONFIG_PPC_47x=y
# CONFIG_EBONY is not set
CONFIG_FSP2=y
CONFIG_476FPE_ERR46=y
-CONFIG_SWIOTLB=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
-CONFIG_CMDLINE="ip=on rw"
# CONFIG_SUSPEND is not set
-# CONFIG_PCI is not set
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -46,14 +46,12 @@ CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
# CONFIG_ATA_SFF is not set
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
@@ -62,7 +60,6 @@ CONFIG_IBM_EMAC=m
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
@@ -71,6 +68,7 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
+# CONFIG_DEVMEM is not set
CONFIG_I2C=y
CONFIG_I2C_IBM_IIC=y
CONFIG_PTP_1588_CLOCK=y
@@ -106,6 +104,12 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_DEFAULT="n"
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_HW is not set
CONFIG_XZ_DEC=y
CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=3
@@ -113,9 +117,3 @@ CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index c11e777b2f3d..b8d97061517a 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -1,5 +1,3 @@
-CONFIG_44x=y
-CONFIG_SMP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
@@ -7,19 +5,22 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="root=/dev/issblk0"
+CONFIG_44x=y
+CONFIG_SMP=y
CONFIG_PPC_47x=y
# CONFIG_EBONY is not set
CONFIG_ISS4xx=y
CONFIG_HZ_100=y
CONFIG_MATH_EMULATION=y
CONFIG_IRQ_ALL_CPUS=y
-CONFIG_CMDLINE="root=/dev/issblk0"
-# CONFIG_PCI is not set
CONFIG_ADVANCED_OPTIONS=y
CONFIG_DYNAMIC_MEMSTART=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -33,7 +34,6 @@ CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
# CONFIG_INPUT is not set
@@ -56,13 +56,13 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_PPC_EARLY_DEBUG=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_HW is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_PPC_EARLY_DEBUG=y
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 47252c2d7669..d2e4bbe1492c 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,4 +1,3 @@
-CONFIG_44x=y
CONFIG_LOCALVERSION="-pika"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
@@ -7,15 +6,16 @@ CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="ip=on"
+CONFIG_44x=y
# CONFIG_EBONY is not set
CONFIG_WARP=y
CONFIG_PPC4xx_GPIO=y
CONFIG_HZ_1000=y
-CONFIG_CMDLINE="ip=on"
-# CONFIG_PCI is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -31,7 +31,6 @@ CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_NAND_NDFC=y
CONFIG_MTD_UBI=y
@@ -88,9 +87,9 @@ CONFIG_NLS_UTF8=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
index 271daff47d1d..98c0644e80b4 100644
--- a/arch/powerpc/configs/holly_defconfig
+++ b/arch/powerpc/configs/holly_defconfig
@@ -4,17 +4,18 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyS0,115200"
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_PPC_HOLLY=y
CONFIG_GEN_RTC=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_SECCOMP is not set
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -53,8 +54,8 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
diff --git a/arch/powerpc/configs/mvme5100_defconfig b/arch/powerpc/configs/mvme5100_defconfig
index 1fed6be95d53..884a3e0defde 100644
--- a/arch/powerpc/configs/mvme5100_defconfig
+++ b/arch/powerpc/configs/mvme5100_defconfig
@@ -11,16 +11,17 @@ CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NET_NS is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_MVME5100=y
CONFIG_KVM_GUEST=y
CONFIG_HZ_100=y
-CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
CONFIG_NET=y
@@ -108,13 +109,6 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_UTF8=m
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=y
-CONFIG_XZ_DEC=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD5=y
@@ -125,3 +119,10 @@ CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
diff --git a/arch/powerpc/configs/skiroot_defconfig b/arch/powerpc/configs/skiroot_defconfig
index b806a5d3a695..5e11995508d7 100644
--- a/arch/powerpc/configs/skiroot_defconfig
+++ b/arch/powerpc/configs/skiroot_defconfig
@@ -26,6 +26,8 @@ CONFIG_PERF_EVENTS=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=tty0 console=hvc0 ipr.fast_reboot=1 quiet"
CONFIG_PPC64=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
@@ -42,14 +44,11 @@ CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_PRESERVE_FA_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
-CONFIG_NUMA=y
CONFIG_PPC_64K_PAGES=y
CONFIG_SCHED_SMT=y
-CONFIG_CMDLINE="console=tty0 console=hvc0 ipr.fast_reboot=1 quiet"
-# CONFIG_SECCOMP is not set
# CONFIG_PPC_MEM_KEYS is not set
CONFIG_JUMP_LABEL=y
-CONFIG_STRICT_KERNEL_RWX=y
+# CONFIG_SECCOMP is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_SIG_FORCE=y
@@ -80,7 +79,6 @@ CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
CONFIG_EEPROM_AT24=m
# CONFIG_CXL is not set
-# CONFIG_OCXL is not set
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
@@ -199,7 +197,6 @@ CONFIG_PHYLIB=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_MISC=y
# CONFIG_SERIO_SERPORT is not set
-# CONFIG_DEVMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_IPMI_HANDLER=y
@@ -207,9 +204,10 @@ CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_POWERNV=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_HW_RANDOM=y
+# CONFIG_DEVMEM is not set
+# CONFIG_DEVPORT is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
-# CONFIG_DEVPORT is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 47dcfaddc1ac..17a17b8ae160 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -2,18 +2,19 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_KALLSYMS is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyS0,115200"
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_STORCENTER=y
CONFIG_HZ_100=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_SECCOMP is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
@@ -35,7 +36,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_ATA=y
-CONFIG_PATA_VIA=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -44,16 +44,13 @@ CONFIG_MD_RAID1=y
CONFIG_MD_RAID456=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
-CONFIG_R8169=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@@ -76,4 +73,3 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_CRC_T10DIF=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 2c2f33155317..27fece82ff93 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -27,6 +27,7 @@
#include <linux/initrd.h>
#include <linux/bitops.h>
#include <linux/pgtable.h>
+#include <linux/cmdline.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/page.h>
@@ -309,6 +310,7 @@ static char __init *prom_strstr(const char *s1, const char *s2)
return NULL;
}
+#ifdef GENERIC_CMDLINE_NEED_STRLCAT
static size_t __init prom_strlcat(char *dest, const char *src, size_t count)
{
size_t dsize = prom_strlen(dest);
@@ -328,6 +330,7 @@ static size_t __init prom_strlcat(char *dest, const char *src, size_t count)
return res;
}
+#endif
#ifdef CONFIG_PPC_PSERIES
static int __init prom_strtobool(const char *s, bool *res)
@@ -780,12 +783,11 @@ static void __init early_cmdline_parse(void)
prom_cmd_line[0] = 0;
p = prom_cmd_line;
- if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0)
+ if ((long)prom.chosen > 0)
l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0')
- prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE,
- sizeof(prom_cmd_line));
+ cmdline_add_builtin_custom(prom_cmd_line, (l > 0 ? p : NULL), sizeof(prom_cmd_line),
+ __prombss, prom_strlcpy, prom_strlcat);
prom_printf("command line: %s\n", prom_cmd_line);
--
2.25.1
More information about the Linuxppc-dev
mailing list