[PATCH 26/30] dw-axi-dmac-platform.c: Few typos fixed

[Bhaskar Chowdhury]

s/configurarion/configuration/
s/inerrupts/interrupts/
s/chanels/channels/  ....two different places.
s/Synopsys/Synopsis/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar at gmail.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index d9e4ac3edb4e..ef4da10361a7 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -35,7 +35,7 @@
 /*
  * The set of bus widths supported by the DMA controller. DW AXI DMAC supports
  * master data bus width up to 512 bits (for both AXI master interfaces), but
- * it depends on IP block configurarion.
+ * it depends on IP block configuration.
  */
 #define AXI_DMA_BUSWIDTHS		  \
 	(DMA_SLAVE_BUSWIDTH_1_BYTE	| \
@@ -1056,10 +1056,10 @@ static irqreturn_t dw_axi_dma_interrupt(int irq, void *dev_id)

 	u32 status, i;

-	/* Disable DMAC inerrupts. We'll enable them after processing chanels */
+	/* Disable DMAC interrupts. We'll enable them after processing channels */
 	axi_dma_irq_disable(chip);

-	/* Poll, clear and process every chanel interrupt status */
+	/* Poll, clear and process every channel interrupt status */
 	for (i = 0; i < dw->hdata->nr_channels; i++) {
 		chan = &dw->chan[i];
 		status = axi_chan_irq_read(chan);
@@ -1511,5 +1511,5 @@ static struct platform_driver dw_driver = {
 module_platform_driver(dw_driver);

 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Synopsys DesignWare AXI DMA Controller platform driver");
+MODULE_DESCRIPTION("Synopsis DesignWare AXI DMA Controller platform driver");
 MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>");
--
2.26.3