[PATCH v2 -next] powerpc: kernel/time.c - cleanup warnings
Christophe Leroy
christophe.leroy at csgroup.eu
Wed Mar 24 17:22:39 AEDT 2021
Le 24/03/2021 à 07:14, Christophe Leroy a écrit :
>
>
> Le 24/03/2021 à 00:05, Alexandre Belloni a écrit :
>> On 23/03/2021 23:18:17+0100, Alexandre Belloni wrote:
>>> Hello,
>>>
>>> On 23/03/2021 05:12:57-0400, He Ying wrote:
>>>> We found these warnings in arch/powerpc/kernel/time.c as follows:
>>>> warning: symbol 'decrementer_max' was not declared. Should it be static?
>>>> warning: symbol 'rtc_lock' was not declared. Should it be static?
>>>> warning: symbol 'dtl_consumer' was not declared. Should it be static?
>>>>
>>>> Declare 'decrementer_max' and 'rtc_lock' in powerpc asm/time.h.
>>>> Rename 'rtc_lock' in drviers/rtc/rtc-vr41xx.c to 'vr41xx_rtc_lock' to
>>>> avoid the conflict with the variable in powerpc asm/time.h.
>>>> Move 'dtl_consumer' definition behind "include <asm/dtl.h>" because it
>>>> is declared there.
>>>>
>>>> Reported-by: Hulk Robot <hulkci at huawei.com>
>>>> Signed-off-by: He Ying <heying24 at huawei.com>
>>>> ---
>>>> v2:
>>>> - Instead of including linux/mc146818rtc.h in powerpc kernel/time.c, declare
>>>> rtc_lock in powerpc asm/time.h.
>>>>
>>>
>>> V1 was actually the correct thing to do. rtc_lock is there exactly
>>> because chrp and maple are using mc146818 compatible RTCs. This is then
>>> useful because then drivers/char/nvram.c is enabled. The proper fix
>>> would be to scrap all of that and use rtc-cmos for those platforms as
>>> this drives the RTC properly and exposes the NVRAM for the mc146818.
>>>
>>> Or at least, if there are no users for the char/nvram driver on those
>>> two platforms, remove the spinlock and stop enabling CONFIG_NVRAM or
>>> more likely rename the symbol as it seems to be abused by both chrp and
>>> powermac.
>>>
>>
>> Ok so rtc_lock is not even used by the char/nvram.c driver as it is
>> completely compiled out.
>>
>> I guess it is fine having it move to the individual platform as looking
>> very quickly at the Kconfig, it is not possible to select both
>> simultaneously. Tentative patch:
>>
>
> Looking at it once more, it looks like including linux/mc146818rtc.h is the thing to do, at least
> for now. Several platforms are defining the rtc_lock exactly the same way as powerpc does, and
> including mc146818rtc.h
>
> I think that to get it clean, this change should go in a dedicated patch and do a bit more and
> explain exactly what is being do and why. I'll try to draft something for it.
>
> He Y., can you make a version v3 of your patch excluding the rtc_lock change ?
>
Finally, I think there is not enough changes to justify a separate patch.
So you can send a V3 based on your V1. In addition to the changes you had in V1, please remove the
declaration of rfc_lock in arch/powerpc/platforms/chrp/chrp.h
Christophe
More information about the Linuxppc-dev
mailing list