[PATCH] xsysace: Remove SYSACE driver
Davidlohr Bueso
dave at stgolabs.net
Tue Mar 23 11:04:36 AEDT 2021
Hi,
On Mon, 09 Nov 2020, Michal Simek wrote:
>Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze
>systems. The driver is not regularly tested and very likely not working for
>quite a long time that's why remove it.
Is there a reason this patch was never merged? can the driver be removed? I ran
into this as a potential tasklet user that can be replaced/removed.
Thanks,
Davidlohr
>
>Signed-off-by: Michal Simek <michal.simek at xilinx.com>
>---
>
>Based on discussion
>https://lore.kernel.org/linux-arm-kernel/5ab9a2a1-20e3-c7b2-f666-2034df436e74@kernel.dk/
>
>I have grepped the kernel and found any old ppc platform. I have included
>it in this patch to have a discussion about it.
>
>---
> MAINTAINERS | 1 -
> arch/microblaze/boot/dts/system.dts | 8 -
> arch/powerpc/boot/dts/icon.dts | 7 -
> arch/powerpc/configs/44x/icon_defconfig | 1 -
> drivers/block/Kconfig | 6 -
> drivers/block/Makefile | 1 -
> drivers/block/xsysace.c | 1273 -----------------------
> 7 files changed, 1297 deletions(-)
> delete mode 100644 drivers/block/xsysace.c
>
>diff --git a/MAINTAINERS b/MAINTAINERS
>index cba8ddf87a08..38556c009758 100644
>--- a/MAINTAINERS
>+++ b/MAINTAINERS
>@@ -2741,7 +2741,6 @@ T: git https://github.com/Xilinx/linux-xlnx.git
> F: Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
> F: Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
> F: arch/arm/mach-zynq/
>-F: drivers/block/xsysace.c
> F: drivers/clocksource/timer-cadence-ttc.c
> F: drivers/cpuidle/cpuidle-zynq.c
> F: drivers/edac/synopsys_edac.c
>diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts
>index 5b236527176e..b7ee1056779e 100644
>--- a/arch/microblaze/boot/dts/system.dts
>+++ b/arch/microblaze/boot/dts/system.dts
>@@ -310,14 +310,6 @@ RS232_Uart_1: serial at 84000000 {
> xlnx,odd-parity = <0x0>;
> xlnx,use-parity = <0x0>;
> } ;
>- SysACE_CompactFlash: sysace at 83600000 {
>- compatible = "xlnx,xps-sysace-1.00.a";
>- interrupt-parent = <&xps_intc_0>;
>- interrupts = < 4 2 >;
>- reg = < 0x83600000 0x10000 >;
>- xlnx,family = "virtex5";
>- xlnx,mem-width = <0x10>;
>- } ;
> debug_module: debug at 84400000 {
> compatible = "xlnx,mdm-1.00.d";
> reg = < 0x84400000 0x10000 >;
>diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts
>index fbaa60b8f87a..4fd7a4fbb4fb 100644
>--- a/arch/powerpc/boot/dts/icon.dts
>+++ b/arch/powerpc/boot/dts/icon.dts
>@@ -197,13 +197,6 @@ partition at fa0000 {
> reg = <0x00fa0000 0x00060000>;
> };
> };
>-
>- SysACE_CompactFlash: sysace at 1,0 {
>- compatible = "xlnx,sysace";
>- interrupt-parent = <&UIC2>;
>- interrupts = <24 0x4>;
>- reg = <0x00000001 0x00000000 0x10000>;
>- };
> };
>
> UART0: serial at f0000200 {
>diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig
>index 930948a1da76..fb9a15573546 100644
>--- a/arch/powerpc/configs/44x/icon_defconfig
>+++ b/arch/powerpc/configs/44x/icon_defconfig
>@@ -28,7 +28,6 @@ CONFIG_MTD_CFI_AMDSTD=y
> CONFIG_MTD_PHYSMAP_OF=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=35000
>-CONFIG_XILINX_SYSACE=y
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
> CONFIG_SCSI_CONSTANTS=y
>diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
>index ecceaaa1a66f..9cb02861298d 100644
>--- a/drivers/block/Kconfig
>+++ b/drivers/block/Kconfig
>@@ -388,12 +388,6 @@ config SUNVDC
>
> source "drivers/s390/block/Kconfig"
>
>-config XILINX_SYSACE
>- tristate "Xilinx SystemACE support"
>- depends on 4xx || MICROBLAZE
>- help
>- Include support for the Xilinx SystemACE CompactFlash interface
>-
> config XEN_BLKDEV_FRONTEND
> tristate "Xen virtual block device support"
> depends on XEN
>diff --git a/drivers/block/Makefile b/drivers/block/Makefile
>index e1f63117ee94..5ddd9370972a 100644
>--- a/drivers/block/Makefile
>+++ b/drivers/block/Makefile
>@@ -19,7 +19,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
> obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
> obj-$(CONFIG_BLK_DEV_RAM) += brd.o
> obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
>-obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
> obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
> obj-$(CONFIG_SUNVDC) += sunvdc.o
> obj-$(CONFIG_BLK_DEV_SKD) += skd.o
>diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
>deleted file mode 100644
>index eb8ef65778c3..000000000000
>--- a/drivers/block/xsysace.c
>+++ /dev/null
>@@ -1,1273 +0,0 @@
>-// SPDX-License-Identifier: GPL-2.0-only
>-/*
>- * Xilinx SystemACE device driver
>- *
>- * Copyright 2007 Secret Lab Technologies Ltd.
>- */
>-
>-/*
>- * The SystemACE chip is designed to configure FPGAs by loading an FPGA
>- * bitstream from a file on a CF card and squirting it into FPGAs connected
>- * to the SystemACE JTAG chain. It also has the advantage of providing an
>- * MPU interface which can be used to control the FPGA configuration process
>- * and to use the attached CF card for general purpose storage.
>- *
>- * This driver is a block device driver for the SystemACE.
>- *
>- * Initialization:
>- * The driver registers itself as a platform_device driver at module
>- * load time. The platform bus will take care of calling the
>- * ace_probe() method for all SystemACE instances in the system. Any
>- * number of SystemACE instances are supported. ace_probe() calls
>- * ace_setup() which initialized all data structures, reads the CF
>- * id structure and registers the device.
>- *
>- * Processing:
>- * Just about all of the heavy lifting in this driver is performed by
>- * a Finite State Machine (FSM). The driver needs to wait on a number
>- * of events; some raised by interrupts, some which need to be polled
>- * for. Describing all of the behaviour in a FSM seems to be the
>- * easiest way to keep the complexity low and make it easy to
>- * understand what the driver is doing. If the block ops or the
>- * request function need to interact with the hardware, then they
>- * simply need to flag the request and kick of FSM processing.
>- *
>- * The FSM itself is atomic-safe code which can be run from any
>- * context. The general process flow is:
>- * 1. obtain the ace->lock spinlock.
>- * 2. loop on ace_fsm_dostate() until the ace->fsm_continue flag is
>- * cleared.
>- * 3. release the lock.
>- *
>- * Individual states do not sleep in any way. If a condition needs to
>- * be waited for then the state much clear the fsm_continue flag and
>- * either schedule the FSM to be run again at a later time, or expect
>- * an interrupt to call the FSM when the desired condition is met.
>- *
>- * In normal operation, the FSM is processed at interrupt context
>- * either when the driver's tasklet is scheduled, or when an irq is
>- * raised by the hardware. The tasklet can be scheduled at any time.
>- * The request method in particular schedules the tasklet when a new
>- * request has been indicated by the block layer. Once started, the
>- * FSM proceeds as far as it can processing the request until it
>- * needs on a hardware event. At this point, it must yield execution.
>- *
>- * A state has two options when yielding execution:
>- * 1. ace_fsm_yield()
>- * - Call if need to poll for event.
>- * - clears the fsm_continue flag to exit the processing loop
>- * - reschedules the tasklet to run again as soon as possible
>- * 2. ace_fsm_yieldirq()
>- * - Call if an irq is expected from the HW
>- * - clears the fsm_continue flag to exit the processing loop
>- * - does not reschedule the tasklet so the FSM will not be processed
>- * again until an irq is received.
>- * After calling a yield function, the state must return control back
>- * to the FSM main loop.
>- *
>- * Additionally, the driver maintains a kernel timer which can process
>- * the FSM. If the FSM gets stalled, typically due to a missed
>- * interrupt, then the kernel timer will expire and the driver can
>- * continue where it left off.
>- *
>- * To Do:
>- * - Add FPGA configuration control interface.
>- * - Request major number from lanana
>- */
>-
>-#undef DEBUG
>-
>-#include <linux/module.h>
>-#include <linux/ctype.h>
>-#include <linux/init.h>
>-#include <linux/interrupt.h>
>-#include <linux/errno.h>
>-#include <linux/kernel.h>
>-#include <linux/delay.h>
>-#include <linux/slab.h>
>-#include <linux/blk-mq.h>
>-#include <linux/mutex.h>
>-#include <linux/ata.h>
>-#include <linux/hdreg.h>
>-#include <linux/platform_device.h>
>-#if defined(CONFIG_OF)
>-#include <linux/of_address.h>
>-#include <linux/of_device.h>
>-#include <linux/of_platform.h>
>-#endif
>-
>-MODULE_AUTHOR("Grant Likely <grant.likely at secretlab.ca>");
>-MODULE_DESCRIPTION("Xilinx SystemACE device driver");
>-MODULE_LICENSE("GPL");
>-
>-/* SystemACE register definitions */
>-#define ACE_BUSMODE (0x00)
>-
>-#define ACE_STATUS (0x04)
>-#define ACE_STATUS_CFGLOCK (0x00000001)
>-#define ACE_STATUS_MPULOCK (0x00000002)
>-#define ACE_STATUS_CFGERROR (0x00000004) /* config controller error */
>-#define ACE_STATUS_CFCERROR (0x00000008) /* CF controller error */
>-#define ACE_STATUS_CFDETECT (0x00000010)
>-#define ACE_STATUS_DATABUFRDY (0x00000020)
>-#define ACE_STATUS_DATABUFMODE (0x00000040)
>-#define ACE_STATUS_CFGDONE (0x00000080)
>-#define ACE_STATUS_RDYFORCFCMD (0x00000100)
>-#define ACE_STATUS_CFGMODEPIN (0x00000200)
>-#define ACE_STATUS_CFGADDR_MASK (0x0000e000)
>-#define ACE_STATUS_CFBSY (0x00020000)
>-#define ACE_STATUS_CFRDY (0x00040000)
>-#define ACE_STATUS_CFDWF (0x00080000)
>-#define ACE_STATUS_CFDSC (0x00100000)
>-#define ACE_STATUS_CFDRQ (0x00200000)
>-#define ACE_STATUS_CFCORR (0x00400000)
>-#define ACE_STATUS_CFERR (0x00800000)
>-
>-#define ACE_ERROR (0x08)
>-#define ACE_CFGLBA (0x0c)
>-#define ACE_MPULBA (0x10)
>-
>-#define ACE_SECCNTCMD (0x14)
>-#define ACE_SECCNTCMD_RESET (0x0100)
>-#define ACE_SECCNTCMD_IDENTIFY (0x0200)
>-#define ACE_SECCNTCMD_READ_DATA (0x0300)
>-#define ACE_SECCNTCMD_WRITE_DATA (0x0400)
>-#define ACE_SECCNTCMD_ABORT (0x0600)
>-
>-#define ACE_VERSION (0x16)
>-#define ACE_VERSION_REVISION_MASK (0x00FF)
>-#define ACE_VERSION_MINOR_MASK (0x0F00)
>-#define ACE_VERSION_MAJOR_MASK (0xF000)
>-
>-#define ACE_CTRL (0x18)
>-#define ACE_CTRL_FORCELOCKREQ (0x0001)
>-#define ACE_CTRL_LOCKREQ (0x0002)
>-#define ACE_CTRL_FORCECFGADDR (0x0004)
>-#define ACE_CTRL_FORCECFGMODE (0x0008)
>-#define ACE_CTRL_CFGMODE (0x0010)
>-#define ACE_CTRL_CFGSTART (0x0020)
>-#define ACE_CTRL_CFGSEL (0x0040)
>-#define ACE_CTRL_CFGRESET (0x0080)
>-#define ACE_CTRL_DATABUFRDYIRQ (0x0100)
>-#define ACE_CTRL_ERRORIRQ (0x0200)
>-#define ACE_CTRL_CFGDONEIRQ (0x0400)
>-#define ACE_CTRL_RESETIRQ (0x0800)
>-#define ACE_CTRL_CFGPROG (0x1000)
>-#define ACE_CTRL_CFGADDR_MASK (0xe000)
>-
>-#define ACE_FATSTAT (0x1c)
>-
>-#define ACE_NUM_MINORS 16
>-#define ACE_SECTOR_SIZE (512)
>-#define ACE_FIFO_SIZE (32)
>-#define ACE_BUF_PER_SECTOR (ACE_SECTOR_SIZE / ACE_FIFO_SIZE)
>-
>-#define ACE_BUS_WIDTH_8 0
>-#define ACE_BUS_WIDTH_16 1
>-
>-struct ace_reg_ops;
>-
>-struct ace_device {
>- /* driver state data */
>- int id;
>- int media_change;
>- int users;
>- struct list_head list;
>-
>- /* finite state machine data */
>- struct tasklet_struct fsm_tasklet;
>- uint fsm_task; /* Current activity (ACE_TASK_*) */
>- uint fsm_state; /* Current state (ACE_FSM_STATE_*) */
>- uint fsm_continue_flag; /* cleared to exit FSM mainloop */
>- uint fsm_iter_num;
>- struct timer_list stall_timer;
>-
>- /* Transfer state/result, use for both id and block request */
>- struct request *req; /* request being processed */
>- void *data_ptr; /* pointer to I/O buffer */
>- int data_count; /* number of buffers remaining */
>- int data_result; /* Result of transfer; 0 := success */
>-
>- int id_req_count; /* count of id requests */
>- int id_result;
>- struct completion id_completion; /* used when id req finishes */
>- int in_irq;
>-
>- /* Details of hardware device */
>- resource_size_t physaddr;
>- void __iomem *baseaddr;
>- int irq;
>- int bus_width; /* 0 := 8 bit; 1 := 16 bit */
>- struct ace_reg_ops *reg_ops;
>- int lock_count;
>-
>- /* Block device data structures */
>- spinlock_t lock;
>- struct device *dev;
>- struct request_queue *queue;
>- struct gendisk *gd;
>- struct blk_mq_tag_set tag_set;
>- struct list_head rq_list;
>-
>- /* Inserted CF card parameters */
>- u16 cf_id[ATA_ID_WORDS];
>-};
>-
>-static DEFINE_MUTEX(xsysace_mutex);
>-static int ace_major;
>-
>-/* ---------------------------------------------------------------------
>- * Low level register access
>- */
>-
>-struct ace_reg_ops {
>- u16(*in) (struct ace_device * ace, int reg);
>- void (*out) (struct ace_device * ace, int reg, u16 val);
>- void (*datain) (struct ace_device * ace);
>- void (*dataout) (struct ace_device * ace);
>-};
>-
>-/* 8 Bit bus width */
>-static u16 ace_in_8(struct ace_device *ace, int reg)
>-{
>- void __iomem *r = ace->baseaddr + reg;
>- return in_8(r) | (in_8(r + 1) << 8);
>-}
>-
>-static void ace_out_8(struct ace_device *ace, int reg, u16 val)
>-{
>- void __iomem *r = ace->baseaddr + reg;
>- out_8(r, val);
>- out_8(r + 1, val >> 8);
>-}
>-
>-static void ace_datain_8(struct ace_device *ace)
>-{
>- void __iomem *r = ace->baseaddr + 0x40;
>- u8 *dst = ace->data_ptr;
>- int i = ACE_FIFO_SIZE;
>- while (i--)
>- *dst++ = in_8(r++);
>- ace->data_ptr = dst;
>-}
>-
>-static void ace_dataout_8(struct ace_device *ace)
>-{
>- void __iomem *r = ace->baseaddr + 0x40;
>- u8 *src = ace->data_ptr;
>- int i = ACE_FIFO_SIZE;
>- while (i--)
>- out_8(r++, *src++);
>- ace->data_ptr = src;
>-}
>-
>-static struct ace_reg_ops ace_reg_8_ops = {
>- .in = ace_in_8,
>- .out = ace_out_8,
>- .datain = ace_datain_8,
>- .dataout = ace_dataout_8,
>-};
>-
>-/* 16 bit big endian bus attachment */
>-static u16 ace_in_be16(struct ace_device *ace, int reg)
>-{
>- return in_be16(ace->baseaddr + reg);
>-}
>-
>-static void ace_out_be16(struct ace_device *ace, int reg, u16 val)
>-{
>- out_be16(ace->baseaddr + reg, val);
>-}
>-
>-static void ace_datain_be16(struct ace_device *ace)
>-{
>- int i = ACE_FIFO_SIZE / 2;
>- u16 *dst = ace->data_ptr;
>- while (i--)
>- *dst++ = in_le16(ace->baseaddr + 0x40);
>- ace->data_ptr = dst;
>-}
>-
>-static void ace_dataout_be16(struct ace_device *ace)
>-{
>- int i = ACE_FIFO_SIZE / 2;
>- u16 *src = ace->data_ptr;
>- while (i--)
>- out_le16(ace->baseaddr + 0x40, *src++);
>- ace->data_ptr = src;
>-}
>-
>-/* 16 bit little endian bus attachment */
>-static u16 ace_in_le16(struct ace_device *ace, int reg)
>-{
>- return in_le16(ace->baseaddr + reg);
>-}
>-
>-static void ace_out_le16(struct ace_device *ace, int reg, u16 val)
>-{
>- out_le16(ace->baseaddr + reg, val);
>-}
>-
>-static void ace_datain_le16(struct ace_device *ace)
>-{
>- int i = ACE_FIFO_SIZE / 2;
>- u16 *dst = ace->data_ptr;
>- while (i--)
>- *dst++ = in_be16(ace->baseaddr + 0x40);
>- ace->data_ptr = dst;
>-}
>-
>-static void ace_dataout_le16(struct ace_device *ace)
>-{
>- int i = ACE_FIFO_SIZE / 2;
>- u16 *src = ace->data_ptr;
>- while (i--)
>- out_be16(ace->baseaddr + 0x40, *src++);
>- ace->data_ptr = src;
>-}
>-
>-static struct ace_reg_ops ace_reg_be16_ops = {
>- .in = ace_in_be16,
>- .out = ace_out_be16,
>- .datain = ace_datain_be16,
>- .dataout = ace_dataout_be16,
>-};
>-
>-static struct ace_reg_ops ace_reg_le16_ops = {
>- .in = ace_in_le16,
>- .out = ace_out_le16,
>- .datain = ace_datain_le16,
>- .dataout = ace_dataout_le16,
>-};
>-
>-static inline u16 ace_in(struct ace_device *ace, int reg)
>-{
>- return ace->reg_ops->in(ace, reg);
>-}
>-
>-static inline u32 ace_in32(struct ace_device *ace, int reg)
>-{
>- return ace_in(ace, reg) | (ace_in(ace, reg + 2) << 16);
>-}
>-
>-static inline void ace_out(struct ace_device *ace, int reg, u16 val)
>-{
>- ace->reg_ops->out(ace, reg, val);
>-}
>-
>-static inline void ace_out32(struct ace_device *ace, int reg, u32 val)
>-{
>- ace_out(ace, reg, val);
>- ace_out(ace, reg + 2, val >> 16);
>-}
>-
>-/* ---------------------------------------------------------------------
>- * Debug support functions
>- */
>-
>-#if defined(DEBUG)
>-static void ace_dump_mem(void *base, int len)
>-{
>- const char *ptr = base;
>- int i, j;
>-
>- for (i = 0; i < len; i += 16) {
>- printk(KERN_INFO "%.8x:", i);
>- for (j = 0; j < 16; j++) {
>- if (!(j % 4))
>- printk(" ");
>- printk("%.2x", ptr[i + j]);
>- }
>- printk(" ");
>- for (j = 0; j < 16; j++)
>- printk("%c", isprint(ptr[i + j]) ? ptr[i + j] : '.');
>- printk("\n");
>- }
>-}
>-#else
>-static inline void ace_dump_mem(void *base, int len)
>-{
>-}
>-#endif
>-
>-static void ace_dump_regs(struct ace_device *ace)
>-{
>- dev_info(ace->dev,
>- " ctrl: %.8x seccnt/cmd: %.4x ver:%.4x\n"
>- " status:%.8x mpu_lba:%.8x busmode:%4x\n"
>- " error: %.8x cfg_lba:%.8x fatstat:%.4x\n",
>- ace_in32(ace, ACE_CTRL),
>- ace_in(ace, ACE_SECCNTCMD),
>- ace_in(ace, ACE_VERSION),
>- ace_in32(ace, ACE_STATUS),
>- ace_in32(ace, ACE_MPULBA),
>- ace_in(ace, ACE_BUSMODE),
>- ace_in32(ace, ACE_ERROR),
>- ace_in32(ace, ACE_CFGLBA), ace_in(ace, ACE_FATSTAT));
>-}
>-
>-static void ace_fix_driveid(u16 *id)
>-{
>-#if defined(__BIG_ENDIAN)
>- int i;
>-
>- /* All half words have wrong byte order; swap the bytes */
>- for (i = 0; i < ATA_ID_WORDS; i++, id++)
>- *id = le16_to_cpu(*id);
>-#endif
>-}
>-
>-/* ---------------------------------------------------------------------
>- * Finite State Machine (FSM) implementation
>- */
>-
>-/* FSM tasks; used to direct state transitions */
>-#define ACE_TASK_IDLE 0
>-#define ACE_TASK_IDENTIFY 1
>-#define ACE_TASK_READ 2
>-#define ACE_TASK_WRITE 3
>-#define ACE_FSM_NUM_TASKS 4
>-
>-/* FSM state definitions */
>-#define ACE_FSM_STATE_IDLE 0
>-#define ACE_FSM_STATE_REQ_LOCK 1
>-#define ACE_FSM_STATE_WAIT_LOCK 2
>-#define ACE_FSM_STATE_WAIT_CFREADY 3
>-#define ACE_FSM_STATE_IDENTIFY_PREPARE 4
>-#define ACE_FSM_STATE_IDENTIFY_TRANSFER 5
>-#define ACE_FSM_STATE_IDENTIFY_COMPLETE 6
>-#define ACE_FSM_STATE_REQ_PREPARE 7
>-#define ACE_FSM_STATE_REQ_TRANSFER 8
>-#define ACE_FSM_STATE_REQ_COMPLETE 9
>-#define ACE_FSM_STATE_ERROR 10
>-#define ACE_FSM_NUM_STATES 11
>-
>-/* Set flag to exit FSM loop and reschedule tasklet */
>-static inline void ace_fsm_yieldpoll(struct ace_device *ace)
>-{
>- tasklet_schedule(&ace->fsm_tasklet);
>- ace->fsm_continue_flag = 0;
>-}
>-
>-static inline void ace_fsm_yield(struct ace_device *ace)
>-{
>- dev_dbg(ace->dev, "%s()\n", __func__);
>- ace_fsm_yieldpoll(ace);
>-}
>-
>-/* Set flag to exit FSM loop and wait for IRQ to reschedule tasklet */
>-static inline void ace_fsm_yieldirq(struct ace_device *ace)
>-{
>- dev_dbg(ace->dev, "ace_fsm_yieldirq()\n");
>-
>- if (ace->irq > 0)
>- ace->fsm_continue_flag = 0;
>- else
>- ace_fsm_yieldpoll(ace);
>-}
>-
>-static bool ace_has_next_request(struct request_queue *q)
>-{
>- struct ace_device *ace = q->queuedata;
>-
>- return !list_empty(&ace->rq_list);
>-}
>-
>-/* Get the next read/write request; ending requests that we don't handle */
>-static struct request *ace_get_next_request(struct request_queue *q)
>-{
>- struct ace_device *ace = q->queuedata;
>- struct request *rq;
>-
>- rq = list_first_entry_or_null(&ace->rq_list, struct request, queuelist);
>- if (rq) {
>- list_del_init(&rq->queuelist);
>- blk_mq_start_request(rq);
>- }
>-
>- return NULL;
>-}
>-
>-static void ace_fsm_dostate(struct ace_device *ace)
>-{
>- struct request *req;
>- u32 status;
>- u16 val;
>- int count;
>-
>-#if defined(DEBUG)
>- dev_dbg(ace->dev, "fsm_state=%i, id_req_count=%i\n",
>- ace->fsm_state, ace->id_req_count);
>-#endif
>-
>- /* Verify that there is actually a CF in the slot. If not, then
>- * bail out back to the idle state and wake up all the waiters */
>- status = ace_in32(ace, ACE_STATUS);
>- if ((status & ACE_STATUS_CFDETECT) == 0) {
>- ace->fsm_state = ACE_FSM_STATE_IDLE;
>- ace->media_change = 1;
>- set_capacity(ace->gd, 0);
>- dev_info(ace->dev, "No CF in slot\n");
>-
>- /* Drop all in-flight and pending requests */
>- if (ace->req) {
>- blk_mq_end_request(ace->req, BLK_STS_IOERR);
>- ace->req = NULL;
>- }
>- while ((req = ace_get_next_request(ace->queue)) != NULL)
>- blk_mq_end_request(req, BLK_STS_IOERR);
>-
>- /* Drop back to IDLE state and notify waiters */
>- ace->fsm_state = ACE_FSM_STATE_IDLE;
>- ace->id_result = -EIO;
>- while (ace->id_req_count) {
>- complete(&ace->id_completion);
>- ace->id_req_count--;
>- }
>- }
>-
>- switch (ace->fsm_state) {
>- case ACE_FSM_STATE_IDLE:
>- /* See if there is anything to do */
>- if (ace->id_req_count || ace_has_next_request(ace->queue)) {
>- ace->fsm_iter_num++;
>- ace->fsm_state = ACE_FSM_STATE_REQ_LOCK;
>- mod_timer(&ace->stall_timer, jiffies + HZ);
>- if (!timer_pending(&ace->stall_timer))
>- add_timer(&ace->stall_timer);
>- break;
>- }
>- del_timer(&ace->stall_timer);
>- ace->fsm_continue_flag = 0;
>- break;
>-
>- case ACE_FSM_STATE_REQ_LOCK:
>- if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
>- /* Already have the lock, jump to next state */
>- ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
>- break;
>- }
>-
>- /* Request the lock */
>- val = ace_in(ace, ACE_CTRL);
>- ace_out(ace, ACE_CTRL, val | ACE_CTRL_LOCKREQ);
>- ace->fsm_state = ACE_FSM_STATE_WAIT_LOCK;
>- break;
>-
>- case ACE_FSM_STATE_WAIT_LOCK:
>- if (ace_in(ace, ACE_STATUS) & ACE_STATUS_MPULOCK) {
>- /* got the lock; move to next state */
>- ace->fsm_state = ACE_FSM_STATE_WAIT_CFREADY;
>- break;
>- }
>-
>- /* wait a bit for the lock */
>- ace_fsm_yield(ace);
>- break;
>-
>- case ACE_FSM_STATE_WAIT_CFREADY:
>- status = ace_in32(ace, ACE_STATUS);
>- if (!(status & ACE_STATUS_RDYFORCFCMD) ||
>- (status & ACE_STATUS_CFBSY)) {
>- /* CF card isn't ready; it needs to be polled */
>- ace_fsm_yield(ace);
>- break;
>- }
>-
>- /* Device is ready for command; determine what to do next */
>- if (ace->id_req_count)
>- ace->fsm_state = ACE_FSM_STATE_IDENTIFY_PREPARE;
>- else
>- ace->fsm_state = ACE_FSM_STATE_REQ_PREPARE;
>- break;
>-
>- case ACE_FSM_STATE_IDENTIFY_PREPARE:
>- /* Send identify command */
>- ace->fsm_task = ACE_TASK_IDENTIFY;
>- ace->data_ptr = ace->cf_id;
>- ace->data_count = ACE_BUF_PER_SECTOR;
>- ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY);
>-
>- /* As per datasheet, put config controller in reset */
>- val = ace_in(ace, ACE_CTRL);
>- ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
>-
>- /* irq handler takes over from this point; wait for the
>- * transfer to complete */
>- ace->fsm_state = ACE_FSM_STATE_IDENTIFY_TRANSFER;
>- ace_fsm_yieldirq(ace);
>- break;
>-
>- case ACE_FSM_STATE_IDENTIFY_TRANSFER:
>- /* Check that the sysace is ready to receive data */
>- status = ace_in32(ace, ACE_STATUS);
>- if (status & ACE_STATUS_CFBSY) {
>- dev_dbg(ace->dev, "CFBSY set; t=%i iter=%i dc=%i\n",
>- ace->fsm_task, ace->fsm_iter_num,
>- ace->data_count);
>- ace_fsm_yield(ace);
>- break;
>- }
>- if (!(status & ACE_STATUS_DATABUFRDY)) {
>- ace_fsm_yield(ace);
>- break;
>- }
>-
>- /* Transfer the next buffer */
>- ace->reg_ops->datain(ace);
>- ace->data_count--;
>-
>- /* If there are still buffers to be transfers; jump out here */
>- if (ace->data_count != 0) {
>- ace_fsm_yieldirq(ace);
>- break;
>- }
>-
>- /* transfer finished; kick state machine */
>- dev_dbg(ace->dev, "identify finished\n");
>- ace->fsm_state = ACE_FSM_STATE_IDENTIFY_COMPLETE;
>- break;
>-
>- case ACE_FSM_STATE_IDENTIFY_COMPLETE:
>- ace_fix_driveid(ace->cf_id);
>- ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */
>-
>- if (ace->data_result) {
>- /* Error occurred, disable the disk */
>- ace->media_change = 1;
>- set_capacity(ace->gd, 0);
>- dev_err(ace->dev, "error fetching CF id (%i)\n",
>- ace->data_result);
>- } else {
>- ace->media_change = 0;
>-
>- /* Record disk parameters */
>- set_capacity(ace->gd,
>- ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
>- dev_info(ace->dev, "capacity: %i sectors\n",
>- ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
>- }
>-
>- /* We're done, drop to IDLE state and notify waiters */
>- ace->fsm_state = ACE_FSM_STATE_IDLE;
>- ace->id_result = ace->data_result;
>- while (ace->id_req_count) {
>- complete(&ace->id_completion);
>- ace->id_req_count--;
>- }
>- break;
>-
>- case ACE_FSM_STATE_REQ_PREPARE:
>- req = ace_get_next_request(ace->queue);
>- if (!req) {
>- ace->fsm_state = ACE_FSM_STATE_IDLE;
>- break;
>- }
>-
>- /* Okay, it's a data request, set it up for transfer */
>- dev_dbg(ace->dev,
>- "request: sec=%llx hcnt=%x, ccnt=%x, dir=%i\n",
>- (unsigned long long)blk_rq_pos(req),
>- blk_rq_sectors(req), blk_rq_cur_sectors(req),
>- rq_data_dir(req));
>-
>- ace->req = req;
>- ace->data_ptr = bio_data(req->bio);
>- ace->data_count = blk_rq_cur_sectors(req) * ACE_BUF_PER_SECTOR;
>- ace_out32(ace, ACE_MPULBA, blk_rq_pos(req) & 0x0FFFFFFF);
>-
>- count = blk_rq_sectors(req);
>- if (rq_data_dir(req)) {
>- /* Kick off write request */
>- dev_dbg(ace->dev, "write data\n");
>- ace->fsm_task = ACE_TASK_WRITE;
>- ace_out(ace, ACE_SECCNTCMD,
>- count | ACE_SECCNTCMD_WRITE_DATA);
>- } else {
>- /* Kick off read request */
>- dev_dbg(ace->dev, "read data\n");
>- ace->fsm_task = ACE_TASK_READ;
>- ace_out(ace, ACE_SECCNTCMD,
>- count | ACE_SECCNTCMD_READ_DATA);
>- }
>-
>- /* As per datasheet, put config controller in reset */
>- val = ace_in(ace, ACE_CTRL);
>- ace_out(ace, ACE_CTRL, val | ACE_CTRL_CFGRESET);
>-
>- /* Move to the transfer state. The systemace will raise
>- * an interrupt once there is something to do
>- */
>- ace->fsm_state = ACE_FSM_STATE_REQ_TRANSFER;
>- if (ace->fsm_task == ACE_TASK_READ)
>- ace_fsm_yieldirq(ace); /* wait for data ready */
>- break;
>-
>- case ACE_FSM_STATE_REQ_TRANSFER:
>- /* Check that the sysace is ready to receive data */
>- status = ace_in32(ace, ACE_STATUS);
>- if (status & ACE_STATUS_CFBSY) {
>- dev_dbg(ace->dev,
>- "CFBSY set; t=%i iter=%i c=%i dc=%i irq=%i\n",
>- ace->fsm_task, ace->fsm_iter_num,
>- blk_rq_cur_sectors(ace->req) * 16,
>- ace->data_count, ace->in_irq);
>- ace_fsm_yield(ace); /* need to poll CFBSY bit */
>- break;
>- }
>- if (!(status & ACE_STATUS_DATABUFRDY)) {
>- dev_dbg(ace->dev,
>- "DATABUF not set; t=%i iter=%i c=%i dc=%i irq=%i\n",
>- ace->fsm_task, ace->fsm_iter_num,
>- blk_rq_cur_sectors(ace->req) * 16,
>- ace->data_count, ace->in_irq);
>- ace_fsm_yieldirq(ace);
>- break;
>- }
>-
>- /* Transfer the next buffer */
>- if (ace->fsm_task == ACE_TASK_WRITE)
>- ace->reg_ops->dataout(ace);
>- else
>- ace->reg_ops->datain(ace);
>- ace->data_count--;
>-
>- /* If there are still buffers to be transfers; jump out here */
>- if (ace->data_count != 0) {
>- ace_fsm_yieldirq(ace);
>- break;
>- }
>-
>- /* bio finished; is there another one? */
>- if (blk_update_request(ace->req, BLK_STS_OK,
>- blk_rq_cur_bytes(ace->req))) {
>- /* dev_dbg(ace->dev, "next block; h=%u c=%u\n",
>- * blk_rq_sectors(ace->req),
>- * blk_rq_cur_sectors(ace->req));
>- */
>- ace->data_ptr = bio_data(ace->req->bio);
>- ace->data_count = blk_rq_cur_sectors(ace->req) * 16;
>- ace_fsm_yieldirq(ace);
>- break;
>- }
>-
>- ace->fsm_state = ACE_FSM_STATE_REQ_COMPLETE;
>- break;
>-
>- case ACE_FSM_STATE_REQ_COMPLETE:
>- ace->req = NULL;
>-
>- /* Finished request; go to idle state */
>- ace->fsm_state = ACE_FSM_STATE_IDLE;
>- break;
>-
>- default:
>- ace->fsm_state = ACE_FSM_STATE_IDLE;
>- break;
>- }
>-}
>-
>-static void ace_fsm_tasklet(unsigned long data)
>-{
>- struct ace_device *ace = (void *)data;
>- unsigned long flags;
>-
>- spin_lock_irqsave(&ace->lock, flags);
>-
>- /* Loop over state machine until told to stop */
>- ace->fsm_continue_flag = 1;
>- while (ace->fsm_continue_flag)
>- ace_fsm_dostate(ace);
>-
>- spin_unlock_irqrestore(&ace->lock, flags);
>-}
>-
>-static void ace_stall_timer(struct timer_list *t)
>-{
>- struct ace_device *ace = from_timer(ace, t, stall_timer);
>- unsigned long flags;
>-
>- dev_warn(ace->dev,
>- "kicking stalled fsm; state=%i task=%i iter=%i dc=%i\n",
>- ace->fsm_state, ace->fsm_task, ace->fsm_iter_num,
>- ace->data_count);
>- spin_lock_irqsave(&ace->lock, flags);
>-
>- /* Rearm the stall timer *before* entering FSM (which may then
>- * delete the timer) */
>- mod_timer(&ace->stall_timer, jiffies + HZ);
>-
>- /* Loop over state machine until told to stop */
>- ace->fsm_continue_flag = 1;
>- while (ace->fsm_continue_flag)
>- ace_fsm_dostate(ace);
>-
>- spin_unlock_irqrestore(&ace->lock, flags);
>-}
>-
>-/* ---------------------------------------------------------------------
>- * Interrupt handling routines
>- */
>-static int ace_interrupt_checkstate(struct ace_device *ace)
>-{
>- u32 sreg = ace_in32(ace, ACE_STATUS);
>- u16 creg = ace_in(ace, ACE_CTRL);
>-
>- /* Check for error occurrence */
>- if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) &&
>- (creg & ACE_CTRL_ERRORIRQ)) {
>- dev_err(ace->dev, "transfer failure\n");
>- ace_dump_regs(ace);
>- return -EIO;
>- }
>-
>- return 0;
>-}
>-
>-static irqreturn_t ace_interrupt(int irq, void *dev_id)
>-{
>- u16 creg;
>- struct ace_device *ace = dev_id;
>-
>- /* be safe and get the lock */
>- spin_lock(&ace->lock);
>- ace->in_irq = 1;
>-
>- /* clear the interrupt */
>- creg = ace_in(ace, ACE_CTRL);
>- ace_out(ace, ACE_CTRL, creg | ACE_CTRL_RESETIRQ);
>- ace_out(ace, ACE_CTRL, creg);
>-
>- /* check for IO failures */
>- if (ace_interrupt_checkstate(ace))
>- ace->data_result = -EIO;
>-
>- if (ace->fsm_task == 0) {
>- dev_err(ace->dev,
>- "spurious irq; stat=%.8x ctrl=%.8x cmd=%.4x\n",
>- ace_in32(ace, ACE_STATUS), ace_in32(ace, ACE_CTRL),
>- ace_in(ace, ACE_SECCNTCMD));
>- dev_err(ace->dev, "fsm_task=%i fsm_state=%i data_count=%i\n",
>- ace->fsm_task, ace->fsm_state, ace->data_count);
>- }
>-
>- /* Loop over state machine until told to stop */
>- ace->fsm_continue_flag = 1;
>- while (ace->fsm_continue_flag)
>- ace_fsm_dostate(ace);
>-
>- /* done with interrupt; drop the lock */
>- ace->in_irq = 0;
>- spin_unlock(&ace->lock);
>-
>- return IRQ_HANDLED;
>-}
>-
>-/* ---------------------------------------------------------------------
>- * Block ops
>- */
>-static blk_status_t ace_queue_rq(struct blk_mq_hw_ctx *hctx,
>- const struct blk_mq_queue_data *bd)
>-{
>- struct ace_device *ace = hctx->queue->queuedata;
>- struct request *req = bd->rq;
>-
>- if (blk_rq_is_passthrough(req)) {
>- blk_mq_start_request(req);
>- return BLK_STS_IOERR;
>- }
>-
>- spin_lock_irq(&ace->lock);
>- list_add_tail(&req->queuelist, &ace->rq_list);
>- spin_unlock_irq(&ace->lock);
>-
>- tasklet_schedule(&ace->fsm_tasklet);
>- return BLK_STS_OK;
>-}
>-
>-static unsigned int ace_check_events(struct gendisk *gd, unsigned int clearing)
>-{
>- struct ace_device *ace = gd->private_data;
>- dev_dbg(ace->dev, "ace_check_events(): %i\n", ace->media_change);
>-
>- return ace->media_change ? DISK_EVENT_MEDIA_CHANGE : 0;
>-}
>-
>-static void ace_media_changed(struct ace_device *ace)
>-{
>- unsigned long flags;
>-
>- dev_dbg(ace->dev, "requesting cf id and scheduling tasklet\n");
>-
>- spin_lock_irqsave(&ace->lock, flags);
>- ace->id_req_count++;
>- spin_unlock_irqrestore(&ace->lock, flags);
>-
>- tasklet_schedule(&ace->fsm_tasklet);
>- wait_for_completion(&ace->id_completion);
>-
>- dev_dbg(ace->dev, "revalidate complete\n");
>-}
>-
>-static int ace_open(struct block_device *bdev, fmode_t mode)
>-{
>- struct ace_device *ace = bdev->bd_disk->private_data;
>- unsigned long flags;
>-
>- dev_dbg(ace->dev, "ace_open() users=%i\n", ace->users + 1);
>-
>- mutex_lock(&xsysace_mutex);
>- spin_lock_irqsave(&ace->lock, flags);
>- ace->users++;
>- spin_unlock_irqrestore(&ace->lock, flags);
>-
>- if (bdev_check_media_change(bdev) && ace->media_change)
>- ace_media_changed(ace);
>- mutex_unlock(&xsysace_mutex);
>-
>- return 0;
>-}
>-
>-static void ace_release(struct gendisk *disk, fmode_t mode)
>-{
>- struct ace_device *ace = disk->private_data;
>- unsigned long flags;
>- u16 val;
>-
>- dev_dbg(ace->dev, "ace_release() users=%i\n", ace->users - 1);
>-
>- mutex_lock(&xsysace_mutex);
>- spin_lock_irqsave(&ace->lock, flags);
>- ace->users--;
>- if (ace->users == 0) {
>- val = ace_in(ace, ACE_CTRL);
>- ace_out(ace, ACE_CTRL, val & ~ACE_CTRL_LOCKREQ);
>- }
>- spin_unlock_irqrestore(&ace->lock, flags);
>- mutex_unlock(&xsysace_mutex);
>-}
>-
>-static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo)
>-{
>- struct ace_device *ace = bdev->bd_disk->private_data;
>- u16 *cf_id = ace->cf_id;
>-
>- dev_dbg(ace->dev, "ace_getgeo()\n");
>-
>- geo->heads = cf_id[ATA_ID_HEADS];
>- geo->sectors = cf_id[ATA_ID_SECTORS];
>- geo->cylinders = cf_id[ATA_ID_CYLS];
>-
>- return 0;
>-}
>-
>-static const struct block_device_operations ace_fops = {
>- .owner = THIS_MODULE,
>- .open = ace_open,
>- .release = ace_release,
>- .check_events = ace_check_events,
>- .getgeo = ace_getgeo,
>-};
>-
>-static const struct blk_mq_ops ace_mq_ops = {
>- .queue_rq = ace_queue_rq,
>-};
>-
>-/* --------------------------------------------------------------------
>- * SystemACE device setup/teardown code
>- */
>-static int ace_setup(struct ace_device *ace)
>-{
>- u16 version;
>- u16 val;
>- int rc;
>-
>- dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
>- dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
>- (unsigned long long)ace->physaddr, ace->irq);
>-
>- spin_lock_init(&ace->lock);
>- init_completion(&ace->id_completion);
>- INIT_LIST_HEAD(&ace->rq_list);
>-
>- /*
>- * Map the device
>- */
>- ace->baseaddr = ioremap(ace->physaddr, 0x80);
>- if (!ace->baseaddr)
>- goto err_ioremap;
>-
>- /*
>- * Initialize the state machine tasklet and stall timer
>- */
>- tasklet_init(&ace->fsm_tasklet, ace_fsm_tasklet, (unsigned long)ace);
>- timer_setup(&ace->stall_timer, ace_stall_timer, 0);
>-
>- /*
>- * Initialize the request queue
>- */
>- ace->queue = blk_mq_init_sq_queue(&ace->tag_set, &ace_mq_ops, 2,
>- BLK_MQ_F_SHOULD_MERGE);
>- if (IS_ERR(ace->queue)) {
>- rc = PTR_ERR(ace->queue);
>- ace->queue = NULL;
>- goto err_blk_initq;
>- }
>- ace->queue->queuedata = ace;
>-
>- blk_queue_logical_block_size(ace->queue, 512);
>- blk_queue_bounce_limit(ace->queue, BLK_BOUNCE_HIGH);
>-
>- /*
>- * Allocate and initialize GD structure
>- */
>- ace->gd = alloc_disk(ACE_NUM_MINORS);
>- if (!ace->gd)
>- goto err_alloc_disk;
>-
>- ace->gd->major = ace_major;
>- ace->gd->first_minor = ace->id * ACE_NUM_MINORS;
>- ace->gd->fops = &ace_fops;
>- ace->gd->events = DISK_EVENT_MEDIA_CHANGE;
>- ace->gd->queue = ace->queue;
>- ace->gd->private_data = ace;
>- snprintf(ace->gd->disk_name, 32, "xs%c", ace->id + 'a');
>-
>- /* set bus width */
>- if (ace->bus_width == ACE_BUS_WIDTH_16) {
>- /* 0x0101 should work regardless of endianess */
>- ace_out_le16(ace, ACE_BUSMODE, 0x0101);
>-
>- /* read it back to determine endianess */
>- if (ace_in_le16(ace, ACE_BUSMODE) == 0x0001)
>- ace->reg_ops = &ace_reg_le16_ops;
>- else
>- ace->reg_ops = &ace_reg_be16_ops;
>- } else {
>- ace_out_8(ace, ACE_BUSMODE, 0x00);
>- ace->reg_ops = &ace_reg_8_ops;
>- }
>-
>- /* Make sure version register is sane */
>- version = ace_in(ace, ACE_VERSION);
>- if ((version == 0) || (version == 0xFFFF))
>- goto err_read;
>-
>- /* Put sysace in a sane state by clearing most control reg bits */
>- ace_out(ace, ACE_CTRL, ACE_CTRL_FORCECFGMODE |
>- ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ);
>-
>- /* Now we can hook up the irq handler */
>- if (ace->irq > 0) {
>- rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace);
>- if (rc) {
>- /* Failure - fall back to polled mode */
>- dev_err(ace->dev, "request_irq failed\n");
>- ace->irq = rc;
>- }
>- }
>-
>- /* Enable interrupts */
>- val = ace_in(ace, ACE_CTRL);
>- val |= ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ;
>- ace_out(ace, ACE_CTRL, val);
>-
>- /* Print the identification */
>- dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
>- (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
>- dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
>- (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
>-
>- ace->media_change = 1;
>- ace_media_changed(ace);
>-
>- /* Make the sysace device 'live' */
>- add_disk(ace->gd);
>-
>- return 0;
>-
>-err_read:
>- /* prevent double queue cleanup */
>- ace->gd->queue = NULL;
>- put_disk(ace->gd);
>-err_alloc_disk:
>- blk_cleanup_queue(ace->queue);
>- blk_mq_free_tag_set(&ace->tag_set);
>-err_blk_initq:
>- iounmap(ace->baseaddr);
>-err_ioremap:
>- dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
>- (unsigned long long) ace->physaddr);
>- return -ENOMEM;
>-}
>-
>-static void ace_teardown(struct ace_device *ace)
>-{
>- if (ace->gd) {
>- del_gendisk(ace->gd);
>- put_disk(ace->gd);
>- }
>-
>- if (ace->queue) {
>- blk_cleanup_queue(ace->queue);
>- blk_mq_free_tag_set(&ace->tag_set);
>- }
>-
>- tasklet_kill(&ace->fsm_tasklet);
>-
>- if (ace->irq > 0)
>- free_irq(ace->irq, ace);
>-
>- iounmap(ace->baseaddr);
>-}
>-
>-static int ace_alloc(struct device *dev, int id, resource_size_t physaddr,
>- int irq, int bus_width)
>-{
>- struct ace_device *ace;
>- int rc;
>- dev_dbg(dev, "ace_alloc(%p)\n", dev);
>-
>- /* Allocate and initialize the ace device structure */
>- ace = kzalloc(sizeof(struct ace_device), GFP_KERNEL);
>- if (!ace) {
>- rc = -ENOMEM;
>- goto err_alloc;
>- }
>-
>- ace->dev = dev;
>- ace->id = id;
>- ace->physaddr = physaddr;
>- ace->irq = irq;
>- ace->bus_width = bus_width;
>-
>- /* Call the setup code */
>- rc = ace_setup(ace);
>- if (rc)
>- goto err_setup;
>-
>- dev_set_drvdata(dev, ace);
>- return 0;
>-
>-err_setup:
>- dev_set_drvdata(dev, NULL);
>- kfree(ace);
>-err_alloc:
>- dev_err(dev, "could not initialize device, err=%i\n", rc);
>- return rc;
>-}
>-
>-static void ace_free(struct device *dev)
>-{
>- struct ace_device *ace = dev_get_drvdata(dev);
>- dev_dbg(dev, "ace_free(%p)\n", dev);
>-
>- if (ace) {
>- ace_teardown(ace);
>- dev_set_drvdata(dev, NULL);
>- kfree(ace);
>- }
>-}
>-
>-/* ---------------------------------------------------------------------
>- * Platform Bus Support
>- */
>-
>-static int ace_probe(struct platform_device *dev)
>-{
>- int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
>- resource_size_t physaddr;
>- struct resource *res;
>- u32 id = dev->id;
>- int irq;
>- int i;
>-
>- dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);
>-
>- /* device id and bus width */
>- if (of_property_read_u32(dev->dev.of_node, "port-number", &id))
>- id = 0;
>- if (of_find_property(dev->dev.of_node, "8-bit", NULL))
>- bus_width = ACE_BUS_WIDTH_8;
>-
>- res = platform_get_resource(dev, IORESOURCE_MEM, 0);
>- if (!res)
>- return -EINVAL;
>-
>- physaddr = res->start;
>- if (!physaddr)
>- return -ENODEV;
>-
>- irq = platform_get_irq_optional(dev, 0);
>-
>- /* Call the bus-independent setup code */
>- return ace_alloc(&dev->dev, id, physaddr, irq, bus_width);
>-}
>-
>-/*
>- * Platform bus remove() method
>- */
>-static int ace_remove(struct platform_device *dev)
>-{
>- ace_free(&dev->dev);
>- return 0;
>-}
>-
>-#if defined(CONFIG_OF)
>-/* Match table for of_platform binding */
>-static const struct of_device_id ace_of_match[] = {
>- { .compatible = "xlnx,opb-sysace-1.00.b", },
>- { .compatible = "xlnx,opb-sysace-1.00.c", },
>- { .compatible = "xlnx,xps-sysace-1.00.a", },
>- { .compatible = "xlnx,sysace", },
>- {},
>-};
>-MODULE_DEVICE_TABLE(of, ace_of_match);
>-#else /* CONFIG_OF */
>-#define ace_of_match NULL
>-#endif /* CONFIG_OF */
>-
>-static struct platform_driver ace_platform_driver = {
>- .probe = ace_probe,
>- .remove = ace_remove,
>- .driver = {
>- .name = "xsysace",
>- .of_match_table = ace_of_match,
>- },
>-};
>-
>-/* ---------------------------------------------------------------------
>- * Module init/exit routines
>- */
>-static int __init ace_init(void)
>-{
>- int rc;
>-
>- ace_major = register_blkdev(ace_major, "xsysace");
>- if (ace_major <= 0) {
>- rc = -ENOMEM;
>- goto err_blk;
>- }
>-
>- rc = platform_driver_register(&ace_platform_driver);
>- if (rc)
>- goto err_plat;
>-
>- pr_info("Xilinx SystemACE device driver, major=%i\n", ace_major);
>- return 0;
>-
>-err_plat:
>- unregister_blkdev(ace_major, "xsysace");
>-err_blk:
>- printk(KERN_ERR "xsysace: registration failed; err=%i\n", rc);
>- return rc;
>-}
>-module_init(ace_init);
>-
>-static void __exit ace_exit(void)
>-{
>- pr_debug("Unregistering Xilinx SystemACE driver\n");
>- platform_driver_unregister(&ace_platform_driver);
>- unregister_blkdev(ace_major, "xsysace");
>-}
>-module_exit(ace_exit);
>--
>2.29.2
>
More information about the Linuxppc-dev
mailing list