[PATCH v11 6/6] powerpc: Book3S 64-bit outline-only KASAN support
Christophe Leroy
christophe.leroy at csgroup.eu
Tue Mar 23 02:14:36 AEDT 2021
Le 19/03/2021 à 15:40, Daniel Axtens a écrit :
> Implement a limited form of KASAN for Book3S 64-bit machines running under
> the Radix MMU, supporting only outline mode.
>
> - Enable the compiler instrumentation to check addresses and maintain the
> shadow region. (This is the guts of KASAN which we can easily reuse.)
>
> - Require kasan-vmalloc support to handle modules and anything else in
> vmalloc space.
>
> - KASAN needs to be able to validate all pointer accesses, but we can't
> instrument all kernel addresses - only linear map and vmalloc. On boot,
> set up a single page of read-only shadow that marks all iomap and
> vmemmap accesses as valid.
>
> - Make our stack-walking code KASAN-safe by using READ_ONCE_NOCHECK -
> generic code, arm64, s390 and x86 all do this for similar sorts of
> reasons: when unwinding a stack, we might touch memory that KASAN has
> marked as being out-of-bounds. In our case we often get this when
> checking for an exception frame because we're checking an arbitrary
> offset into the stack frame.
>
> See commit 20955746320e ("s390/kasan: avoid false positives during stack
> unwind"), commit bcaf669b4bdb ("arm64: disable kasan when accessing
> frame->fp in unwind_frame"), commit 91e08ab0c851 ("x86/dumpstack:
> Prevent KASAN false positive warnings") and commit 6e22c8366416
> ("tracing, kasan: Silence Kasan warning in check_stack of stack_tracer")
>
> - Document KASAN in both generic and powerpc docs.
>
> Background
> ----------
>
> KASAN support on Book3S is a bit tricky to get right:
>
> - It would be good to support inline instrumentation so as to be able to
> catch stack issues that cannot be caught with outline mode.
>
> - Inline instrumentation requires a fixed offset.
>
> - Book3S runs code with translations off ("real mode") during boot,
> including a lot of generic device-tree parsing code which is used to
> determine MMU features.
>
> [ppc64 mm note: The kernel installs a linear mapping at effective
> address c000...-c008.... This is a one-to-one mapping with physical
> memory from 0000... onward. Because of how memory accesses work on
> powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the
> same memory both with translations on (accessing as an 'effective
> address'), and with translations off (accessing as a 'real
> address'). This works in both guests and the hypervisor. For more
> details, see s5.7 of Book III of version 3 of the ISA, in particular
> the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this
> KASAN implementation currently only supports Radix.]
>
> - Some code - most notably a lot of KVM code - also runs with translations
> off after boot.
>
> - Therefore any offset has to point to memory that is valid with
> translations on or off.
>
> One approach is just to give up on inline instrumentation. This way
> boot-time checks can be delayed until after the MMU is set is up, and we
> can just not instrument any code that runs with translations off after
> booting. Take this approach for now and require outline instrumentation.
>
> Previous attempts allowed inline instrumentation. However, they came with
> some unfortunate restrictions: only physically contiguous memory could be
> used and it had to be specified at compile time. Maybe we can do better in
> the future.
>
> Cc: Balbir Singh <bsingharora at gmail.com> # ppc64 out-of-line radix version
> Cc: Aneesh Kumar K.V <aneesh.kumar at linux.ibm.com> # ppc64 hash version
> Cc: Christophe Leroy <christophe.leroy at csgroup.eu> # ppc32 version
> Signed-off-by: Daniel Axtens <dja at axtens.net>
> ---
> diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> index 6084fa499aa3..163755b1cef4 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -32,6 +32,17 @@ KASAN_SANITIZE_early_32.o := n
> KASAN_SANITIZE_cputable.o := n
> KASAN_SANITIZE_prom_init.o := n
> KASAN_SANITIZE_btext.o := n
> +KASAN_SANITIZE_paca.o := n
> +KASAN_SANITIZE_setup_64.o := n
> +KASAN_SANITIZE_mce.o := n
> +KASAN_SANITIZE_mce_power.o := n
> +
> +# we have to be particularly careful in ppc64 to exclude code that
> +# runs with translations off, as we cannot access the shadow with
> +# translations off. However, ppc32 can sanitize this.
Which functions of this file can run with translations off on PPC64 ?
On PPC32 no functions run with translation off.
> +ifdef CONFIG_PPC64
> +KASAN_SANITIZE_traps.o := n
> +endif
>
> ifdef CONFIG_KASAN
> CFLAGS_early_32.o += -DDISABLE_BRANCH_PROFILING
> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
> index 3231c2df9e26..d4ae21b9e9b7 100644
> --- a/arch/powerpc/kernel/process.c
> +++ b/arch/powerpc/kernel/process.c
> @@ -2160,8 +2160,8 @@ void show_stack(struct task_struct *tsk, unsigned long *stack,
> break;
>
> stack = (unsigned long *) sp;
> - newsp = stack[0];
> - ip = stack[STACK_FRAME_LR_SAVE];
> + newsp = READ_ONCE_NOCHECK(stack[0]);
> + ip = READ_ONCE_NOCHECK(stack[STACK_FRAME_LR_SAVE]);
> if (!firstframe || ip != lr) {
> printk("%s["REG"] ["REG"] %pS",
> loglvl, sp, ip, (void *)ip);
> @@ -2179,17 +2179,19 @@ void show_stack(struct task_struct *tsk, unsigned long *stack,
> * See if this is an exception frame.
> * We look for the "regshere" marker in the current frame.
> */
> - if (validate_sp(sp, tsk, STACK_FRAME_WITH_PT_REGS)
> - && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
> + if (validate_sp(sp, tsk, STACK_FRAME_WITH_PT_REGS) &&
> + (READ_ONCE_NOCHECK(stack[STACK_FRAME_MARKER]) ==
> + STACK_FRAME_REGS_MARKER)) {
> struct pt_regs *regs = (struct pt_regs *)
> (sp + STACK_FRAME_OVERHEAD);
>
> - lr = regs->link;
> + lr = READ_ONCE_NOCHECK(regs->link);
> printk("%s--- interrupt: %lx at %pS\n",
> - loglvl, regs->trap, (void *)regs->nip);
> + loglvl, READ_ONCE_NOCHECK(regs->trap),
> + (void *)READ_ONCE_NOCHECK(regs->nip));
> __show_regs(regs);
> printk("%s--- interrupt: %lx\n",
> - loglvl, regs->trap);
> + loglvl, READ_ONCE_NOCHECK(regs->trap));
>
> firstframe = 1;
> }
All changes in that file look more as a bug fix than a thing special for PPC64 KASAN. Could it be a
separate patch ?
> diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
> index 2bfeaa13befb..7f1592dacbeb 100644
> --- a/arch/powerpc/kvm/Makefile
> +++ b/arch/powerpc/kvm/Makefile
> @@ -136,3 +136,8 @@ obj-$(CONFIG_KVM_BOOK3S_64_PR) += kvm-pr.o
> obj-$(CONFIG_KVM_BOOK3S_64_HV) += kvm-hv.o
>
> obj-y += $(kvm-book3s_64-builtin-objs-y)
> +
> +# KVM does a lot in real-mode, and 64-bit Book3S KASAN doesn't support that
> +ifdef CONFIG_PPC_BOOK3S_64
> +KASAN_SANITIZE := n
> +endif
> diff --git a/arch/powerpc/mm/book3s64/Makefile b/arch/powerpc/mm/book3s64/Makefile
> index 1b56d3af47d4..a7d8a68bd2c5 100644
> --- a/arch/powerpc/mm/book3s64/Makefile
> +++ b/arch/powerpc/mm/book3s64/Makefile
> @@ -21,3 +21,12 @@ obj-$(CONFIG_PPC_PKEY) += pkeys.o
>
> # Instrumenting the SLB fault path can lead to duplicate SLB entries
> KCOV_INSTRUMENT_slb.o := n
> +
> +# Parts of these can run in real mode and therefore are
> +# not safe with the current outline KASAN implementation
> +KASAN_SANITIZE_mmu_context.o := n
> +KASAN_SANITIZE_pgtable.o := n
> +KASAN_SANITIZE_radix_pgtable.o := n
> +KASAN_SANITIZE_radix_tlb.o := n
> +KASAN_SANITIZE_slb.o := n
> +KASAN_SANITIZE_pkeys.o := n
> diff --git a/arch/powerpc/mm/kasan/Makefile b/arch/powerpc/mm/kasan/Makefile
> index 42fb628a44fd..07eef87abd6c 100644
> --- a/arch/powerpc/mm/kasan/Makefile
> +++ b/arch/powerpc/mm/kasan/Makefile
> @@ -5,3 +5,4 @@ KASAN_SANITIZE := n
> obj-$(CONFIG_PPC32) += init_32.o
> obj-$(CONFIG_PPC_8xx) += 8xx.o
> obj-$(CONFIG_PPC_BOOK3S_32) += book3s_32.o
> +obj-$(CONFIG_PPC_BOOK3S_64) += init_book3s_64.o
> diff --git a/arch/powerpc/mm/kasan/init_book3s_64.c b/arch/powerpc/mm/kasan/init_book3s_64.c
> new file mode 100644
> index 000000000000..ca913ed951a2
> --- /dev/null
> +++ b/arch/powerpc/mm/kasan/init_book3s_64.c
> @@ -0,0 +1,95 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * KASAN for 64-bit Book3S powerpc
> + *
> + * Copyright (C) 2019-2020 IBM Corporation
> + * Author: Daniel Axtens <dja at axtens.net>
> + */
> +
> +#define DISABLE_BRANCH_PROFILING
> +
> +#include <linux/kasan.h>
> +#include <linux/printk.h>
> +#include <linux/sched/task.h>
> +#include <linux/memblock.h>
> +#include <asm/pgalloc.h>
> +
> +DEFINE_STATIC_KEY_FALSE(powerpc_kasan_enabled_key);
> +
> +static void __init kasan_init_phys_region(void *start, void *end)
> +{
> + unsigned long k_start, k_end, k_cur;
> + void *va;
> +
> + if (start >= end)
> + return;
> +
> + k_start = ALIGN_DOWN((unsigned long)kasan_mem_to_shadow(start), PAGE_SIZE);
> + k_end = ALIGN((unsigned long)kasan_mem_to_shadow(end), PAGE_SIZE);
> +
> + va = memblock_alloc(k_end - k_start, PAGE_SIZE);
> + for (k_cur = k_start; k_cur < k_end; k_cur += PAGE_SIZE, va += PAGE_SIZE)
> + map_kernel_page(k_cur, __pa(va), PAGE_KERNEL);
> +}
> +
> +void __init kasan_init(void)
> +{
> + /*
> + * We want to do the following things:
> + * 1) Map real memory into the shadow for all physical memblocks
> + * This takes us from c000... to c008...
> + * 2) Leave a hole over the shadow of vmalloc space. KASAN_VMALLOC
> + * will manage this for us.
> + * This takes us from c008... to c00a...
> + * 3) Map the 'early shadow'/zero page over iomap and vmemmap space.
> + * This takes us up to where we start at c00e...
> + */
> +
> + void *k_start = kasan_mem_to_shadow((void *)RADIX_VMALLOC_END);
> + void *k_end = kasan_mem_to_shadow((void *)RADIX_VMEMMAP_END);
> + phys_addr_t start, end;
> + u64 i;
> + pte_t zero_pte = pfn_pte(virt_to_pfn(kasan_early_shadow_page), PAGE_KERNEL);
> +
> + if (!early_radix_enabled())
> + panic("KASAN requires radix!");
> +
> + for_each_mem_range(i, &start, &end)
> + kasan_init_phys_region((void *)start, (void *)end);
> +
> + for (i = 0; i < PTRS_PER_PTE; i++)
> + __set_pte_at(&init_mm, (unsigned long)kasan_early_shadow_page,
> + &kasan_early_shadow_pte[i], zero_pte, 0);
> +
> + for (i = 0; i < PTRS_PER_PMD; i++)
> + pmd_populate_kernel(&init_mm, &kasan_early_shadow_pmd[i],
> + kasan_early_shadow_pte);
> +
> + for (i = 0; i < PTRS_PER_PUD; i++)
> + pud_populate(&init_mm, &kasan_early_shadow_pud[i],
> + kasan_early_shadow_pmd);
> +
> + /* map the early shadow over the iomap and vmemmap space */
> + kasan_populate_early_shadow(k_start, k_end);
> +
> + /* mark early shadow region as RO and wipe it */
> + zero_pte = pfn_pte(virt_to_pfn(kasan_early_shadow_page), PAGE_KERNEL_RO);
> + for (i = 0; i < PTRS_PER_PTE; i++)
> + __set_pte_at(&init_mm, (unsigned long)kasan_early_shadow_page,
> + &kasan_early_shadow_pte[i], zero_pte, 0);
> +
> + /*
> + * clear_page relies on some cache info that hasn't been set up yet.
> + * It ends up looping ~forever and blows up other data.
> + * Use memset instead.
> + */
> + memset(kasan_early_shadow_page, 0, PAGE_SIZE);
> +
> + static_branch_inc(&powerpc_kasan_enabled_key);
> +
> + /* Enable error messages */
> + init_task.kasan_depth = 0;
> + pr_info("KASAN init done (64-bit Book3S)\n");
> +}
> +
> +void __init kasan_late_init(void) { }
> diff --git a/arch/powerpc/mm/ptdump/ptdump.c b/arch/powerpc/mm/ptdump/ptdump.c
> index aca354fb670b..63672aa656e8 100644
> --- a/arch/powerpc/mm/ptdump/ptdump.c
> +++ b/arch/powerpc/mm/ptdump/ptdump.c
> @@ -20,6 +20,7 @@
> #include <linux/seq_file.h>
> #include <asm/fixmap.h>
> #include <linux/const.h>
> +#include <linux/kasan.h>
> #include <asm/page.h>
> #include <asm/hugetlb.h>
>
> @@ -317,6 +318,23 @@ static void walk_pud(struct pg_state *st, p4d_t *p4d, unsigned long start)
> unsigned long addr;
> unsigned int i;
>
> +#if defined(CONFIG_KASAN) && defined(CONFIG_PPC_BOOK3S_64)
> + /*
> + * On radix + KASAN, we want to check for the KASAN "early" shadow
> + * which covers huge quantities of memory with the same set of
> + * read-only PTEs. If it is, we want to note the first page (to see
> + * the status change), and then note the last page. This gives us good
> + * results without spending ages noting the exact same PTEs over 100s of
> + * terabytes of memory.
> + */
Could you use huge pages to map shadow memory ?
We do that on PPC32 now.
> + if (p4d_page(*p4d) == virt_to_page(lm_alias(kasan_early_shadow_pud))) {
> + walk_pmd(st, pud, start);
> + addr = start + (PTRS_PER_PUD - 1) * PUD_SIZE;
> + walk_pmd(st, pud, addr);
> + return;
> + }
> +#endif
> +
> for (i = 0; i < PTRS_PER_PUD; i++, pud++) {
> addr = start + i * PUD_SIZE;
> if (!pud_none(*pud) && !pud_is_leaf(*pud))
> @@ -387,11 +405,11 @@ static void populate_markers(void)
> #endif
> address_markers[i++].start_address = FIXADDR_START;
> address_markers[i++].start_address = FIXADDR_TOP;
> +#endif /* CONFIG_PPC64 */
> #ifdef CONFIG_KASAN
> address_markers[i++].start_address = KASAN_SHADOW_START;
> address_markers[i++].start_address = KASAN_SHADOW_END;
> #endif
> -#endif /* CONFIG_PPC64 */
> }
>
> static int ptdump_show(struct seq_file *m, void *v)
> diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
> index 3ce907523b1e..9063c13e7221 100644
> --- a/arch/powerpc/platforms/Kconfig.cputype
> +++ b/arch/powerpc/platforms/Kconfig.cputype
> @@ -101,6 +101,7 @@ config PPC_BOOK3S_64
> select ARCH_SUPPORTS_NUMA_BALANCING
> select IRQ_WORK
> select PPC_MM_SLICES
> + select KASAN_VMALLOC if KASAN
>
> config PPC_BOOK3E_64
> bool "Embedded processors"
> diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
> index 2eb6ae150d1f..f277e4793696 100644
> --- a/arch/powerpc/platforms/powernv/Makefile
> +++ b/arch/powerpc/platforms/powernv/Makefile
> @@ -1,4 +1,10 @@
> # SPDX-License-Identifier: GPL-2.0
> +
> +# nothing that deals with real mode is safe to KASAN
> +# in particular, idle code runs a bunch of things in real mode
> +KASAN_SANITIZE_idle.o := n
> +KASAN_SANITIZE_pci-ioda.o := n
> +
> obj-y += setup.o opal-call.o opal-wrappers.o opal.o opal-async.o
> obj-y += idle.o opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
> obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
> diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
> index c8a2b0b05ac0..202199ef9e5c 100644
> --- a/arch/powerpc/platforms/pseries/Makefile
> +++ b/arch/powerpc/platforms/pseries/Makefile
> @@ -30,3 +30,6 @@ obj-$(CONFIG_PPC_SVM) += svm.o
> obj-$(CONFIG_FA_DUMP) += rtas-fadump.o
>
> obj-$(CONFIG_SUSPEND) += suspend.o
> +
> +# nothing that operates in real mode is safe for KASAN
> +KASAN_SANITIZE_ras.o := n
>
Christophe
More information about the Linuxppc-dev
mailing list