remove the legacy ide driver

Maciej W. Rozycki macro at orcam.me.uk
Sat Mar 20 03:48:32 AEDT 2021


On Thu, 18 Mar 2021, Christoph Hellwig wrote:

> we've been trying to get rid of the legacy ide driver for a while now,
> and finally scheduled a removal for 2021, which is three month old now.

 Hmm, there's still a regression in that pata_legacy unconditionally pokes 
at random I/O port locations corresponding to all the known possible ATA 
interface mappings with ISA option cards:

scsi host0: pata_legacy
ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
ata1.00: ATA-4: ST310211A, 3.54, max UDMA/100
ata1.00: 19541088 sectors, multi 16: LBA
ata1.00: configured for PIO
scsi 0:0:0:0: Direct-Access     ATA      ST310211A        3.54 PQ: 0 ANSI: 5
scsi 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 19541088 512-byte logical blocks: (10.0 GB/9.32 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi host1: pata_legacy
ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
scsi host1: pata_legacy
ata3: PATA max PIO4 cmd 0x1e8 ctl 0x3ee irq 11
scsi host1: pata_legacy
ata4: PATA max PIO4 cmd 0x168 ctl 0x36e irq 10
scsi host1: pata_legacy
ata5: PATA max PIO4 cmd 0x1e0 ctl 0x3e6 irq 8
scsi host1: pata_legacy
ata6: PATA max PIO4 cmd 0x160 ctl 0x366 irq 12

This seems needlessly dangerous to me.  With the old IDE driver I could 
(and did) specify "ide_generic.probe_mask=1" to avoid this clutter (the 
ISA card used with this system has a single ATA port only).

 I guess it's easy to fix by carrying the `probe_mask' parameter over and 
I think we'd rather wait with the removal of the IDE subsystem until we 
have a release with this option supported.  I may look into it unless 
someone beats me to it.

 Overall I find it rather disturbing that nobody has noticed this issue 
over all these years.

 NB it is only earlier this year that I recovered this system from a PSU 
failure several years ago, which took the disk the system previously had 
with it, so myself I had no chance to get at it any earlier, though I did 
mean to have a look as soon as I saw the notice about the scheduled IDE 
removal.

  Maciej


More information about the Linuxppc-dev mailing list