[PATCH v2 1/8] powerpc/xive: Use cpu_to_node() instead of ibm,chip-id property

Greg Kurz groug at kaod.org
Sat Mar 13 00:03:17 AEDT 2021


On Fri, 12 Mar 2021 09:18:39 -0300
Daniel Henrique Barboza <danielhb at linux.ibm.com> wrote:

> 
> 
> On 3/12/21 6:53 AM, Cédric Le Goater wrote:
> > On 3/12/21 2:55 AM, David Gibson wrote:
> >> On Tue, 9 Mar 2021 18:26:35 +0100
> >> Cédric Le Goater <clg at kaod.org> wrote:
> >>
> >>> On 3/9/21 6:08 PM, Daniel Henrique Barboza wrote:
> >>>>
> >>>>
> >>>> On 3/9/21 12:33 PM, Cédric Le Goater wrote:
> >>>>> On 3/8/21 6:13 PM, Greg Kurz wrote:
> >>>>>> On Wed, 3 Mar 2021 18:48:50 +0100
> >>>>>> Cédric Le Goater <clg at kaod.org> wrote:
> >>>>>>   
> >>>>>>> The 'chip_id' field of the XIVE CPU structure is used to choose a
> >>>>>>> target for a source located on the same chip when possible. This field
> >>>>>>> is assigned on the PowerNV platform using the "ibm,chip-id" property
> >>>>>>> on pSeries under KVM when NUMA nodes are defined but it is undefined
> >>>>>>
> >>>>>> This sentence seems to have a syntax problem... like it is missing an
> >>>>>> 'and' before 'on pSeries'.
> >>>>>
> >>>>> ah yes, or simply a comma.
> >>>>>   
> >>>>>>> under PowerVM. The XIVE source structure has a similar field
> >>>>>>> 'src_chip' which is only assigned on the PowerNV platform.
> >>>>>>>
> >>>>>>> cpu_to_node() returns a compatible value on all platforms, 0 being the
> >>>>>>> default node. It will also give us the opportunity to set the affinity
> >>>>>>> of a source on pSeries when we can localize them.
> >>>>>>>   
> >>>>>>
> >>>>>> IIUC this relies on the fact that the NUMA node id is == to chip id
> >>>>>> on PowerNV, i.e. xc->chip_id which is passed to OPAL remain stable
> >>>>>> with this change.
> >>>>>
> >>>>> Linux sets the NUMA node in numa_setup_cpu(). On pseries, the hcall
> >>>>> H_HOME_NODE_ASSOCIATIVITY returns the node id if I am correct (Daniel
> >>>>> in Cc:)
> >>>   [...]
> >>>>>
> >>>>> On PowerNV, Linux uses "ibm,associativity" property of the CPU to find
> >>>>> the node id. This value is built from the chip id in OPAL, so the
> >>>>> value returned by cpu_to_node(cpu) and the value of the "ibm,chip-id"
> >>>>> property are unlikely to be different.
> >>>>>
> >>>>> cpu_to_node(cpu) is used in many places to allocate the structures
> >>>>> locally to the owning node. XIVE is not an exception (see below in the
> >>>>> same patch), it is better to be consistent and get the same information
> >>>>> (node id) using the same routine.
> >>>>>
> >>>>>
> >>>>> In Linux, "ibm,chip-id" is only used in low level PowerNV drivers :
> >>>>> LPC, XSCOM, RNG, VAS, NX. XIVE should be in that list also but skiboot
> >>>>> unifies the controllers of the system to only expose one the OS. This
> >>>>> is problematic and should be changed but it's another topic.
> >>>>>
> >>>>>   
> >>>>>> On the other hand, you have the pSeries case under PowerVM that
> >>>>>> doesn't xc->chip_id, which isn't passed to any hcall AFAICT.
> >>>>>
> >>>>> yes "ibm,chip-id" is an OPAL concept unfortunately and it has no meaning
> >>>>> under PAPR. xc->chip_id on pseries (PowerVM) will contains an invalid
> >>>>> chip id.
> >>>>>
> >>>>> QEMU/KVM exposes "ibm,chip-id" but it's not used. (its value is not
> >>>>> always correct btw)
> >>>>
> >>>>
> >>>> If you have a way to reliably reproduce this, let me know and I'll fix it
> >>>> up in QEMU.
> >>>
> >>> with :
> >>>
> >>>     -smp 4,cores=1,maxcpus=8 -object memory-backend-ram,id=ram-node0,size=2G -numa node,nodeid=0,cpus=0-1,cpus=4-5,memdev=ram-node0 -object memory-backend-ram,id=ram-node1,size=2G -numa node,nodeid=1,cpus=2-3,cpus=6-7,memdev=ram-node1
> >>>
> >>> # dmesg | grep numa
> >>> [    0.013106] numa: Node 0 CPUs: 0-1
> >>> [    0.013136] numa: Node 1 CPUs: 2-3
> >>>
> >>> # dtc -I fs /proc/device-tree/cpus/ -f | grep ibm,chip-id
> >>> 		ibm,chip-id = <0x01>;
> >>> 		ibm,chip-id = <0x02>;
> >>> 		ibm,chip-id = <0x00>;
> >>> 		ibm,chip-id = <0x03>;
> >>>
> >>> with :
> >>>
> >>>    -smp 4,cores=4,maxcpus=8,threads=1 -object memory-backend-ram,id=ram-node0,size=2G -numa node,nodeid=0,cpus=0-1,cpus=4-5,memdev=ram-node0 -object memory-backend-ram,id=ram-node1,size=2G -numa node,nodeid=1,cpus=2-3,cpus=6-7,memdev=ram-node1
> >>>
> >>> # dmesg | grep numa
> >>> [    0.013106] numa: Node 0 CPUs: 0-1
> >>> [    0.013136] numa: Node 1 CPUs: 2-3
> >>>
> >>> # dtc -I fs /proc/device-tree/cpus/ -f | grep ibm,chip-id
> >>> 		ibm,chip-id = <0x00>;
> >>> 		ibm,chip-id = <0x00>;
> >>> 		ibm,chip-id = <0x00>;
> >>> 		ibm,chip-id = <0x00>;
> >>>
> >>> I think we should simply remove "ibm,chip-id" since it's not used and
> >>> not in the PAPR spec.
> >>
> >> As I mentioned to Daniel on our call this morning, oddly it *does*
> >> appear to be used in the RHEL kernel, even though that's 4.18 based.
> >> This patch seems to have caused a minor regression; not in the
> >> identification of NUMA nodes, but in the number of sockets shown be
> >> lscpu, etc.  See https://bugzilla.redhat.com/show_bug.cgi?id=1934421
> >> for more information.
> > 
> > Yes. The property "ibm,chip-id" is wrongly calculated in QEMU. If we
> > remove it, we get with 4.18.0-295.el8.ppc64le or 5.12.0-rc2 :
> > 
> >     [root at localhost ~]# lscpu
> >     Architecture:        ppc64le
> >     Byte Order:          Little Endian
> >     CPU(s):              128
> >     On-line CPU(s) list: 0-127
> >     Thread(s) per core:  4
> >     Core(s) per socket:  16
> >     Socket(s):           2
> >     NUMA node(s):        2
> >     Model:               2.2 (pvr 004e 1202)
> >     Model name:          POWER9 (architected), altivec supported
> >     Hypervisor vendor:   KVM
> >     Virtualization type: para
> >     L1d cache:           32K
> >     L1i cache:           32K
> >     NUMA node0 CPU(s):   0-63
> >     NUMA node1 CPU(s):   64-127
> > 
> >     [root at localhost ~]# grep . /sys/devices/system/cpu/*/topology/physical_package_id
> >     /sys/devices/system/cpu/cpu0/topology/physical_package_id:-1
> >     /sys/devices/system/cpu/cpu100/topology/physical_package_id:-1
> >     /sys/devices/system/cpu/cpu101/topology/physical_package_id:-1
> >     /sys/devices/system/cpu/cpu102/topology/physical_package_id:-1
> >     /sys/devices/system/cpu/cpu103/topology/physical_package_id:-1
> >     ....
> > 
> > "ibm,chip-id" is still being used on some occasion on pSeries machines.
> > This is wrong :/ The problem is :
> > 
> >    #define topology_physical_package_id(cpu)      (cpu_to_chip_id(cpu))
> > 
> > We should be using cpu_to_node().
> 
> 
> IIUC the "real fix" then is this change you mentioned above, together with
> this xive patch as well, to stop using ibm,chip-id for good in the pserie
>   kernel. With these changes QEMU can remove 'ibm,chip-id' from the pseries
> machine without impact. Is this correct?
> 
> If that's the case, then I believe it's ok to go forward with the QEMU side
> change (just for 6.0.0 and newer machines). Or should I wait for the kernel
> changes to be merged upstream first?
> 

I'd say the latter since this is a breaking change and people will want
to identify the upstream commits they have to backport to their kernel
in order to support the disappearance of "ibm,chip-id".

Cheers,

--
Greg

> 
> Thanks,
> 
> 
> DHB
> 
> 
> > 
> > C.
> > 
> >>
> >> Since the value was used by some PAPR kernels - even if they shouldn't
> >> have - I think we should only remove this for newer machine types.  We
> >> also need to check what we're not supplying that the guest kernel is
> >> showing a different number of sockets than specified on the qemu
> >> command line.
> >>
> >>>
> >>> Thanks,
> >>>
> >>> C.
> >>>
> >>>   
> >>>
> >>>   [...]
> >>>   [...]
> >>>   [...]
> >>>   [...]
> >>>   [...]
> >>>   [...]
> >>>   [...]
> >>>   [...]
> >>>   [...]
> >>>
> >>
> >>
> > 



More information about the Linuxppc-dev mailing list