[PATCH v2 7/7] CMDLINE: x86: convert to generic builtin command line

[Ard Biesheuvel]

On Tue, 9 Mar 2021 at 01:03, Daniel Walker <danielwa at cisco.com> wrote:
>
> This updates the x86 code to use the CONFIG_GENERIC_CMDLINE
> option.
>
> Cc: xe-linux-external at cisco.com
> Signed-off-by: Ruslan Ruslichenko <rruslich at cisco.com>
> Signed-off-by: Ruslan Bilovol <ruslan.bilovol at gmail.com>
> Signed-off-by: Daniel Walker <danielwa at cisco.com>
> ---
>  arch/x86/Kconfig                        | 44 +------------------------
>  arch/x86/kernel/setup.c                 | 18 ++--------
>  drivers/firmware/efi/libstub/x86-stub.c |  2 +-
>  3 files changed, 4 insertions(+), 60 deletions(-)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 21f851179ff0..3950f9bf9855 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -115,6 +115,7 @@ config X86
>         select EDAC_SUPPORT
>         select GENERIC_CLOCKEVENTS_BROADCAST    if X86_64 || (X86_32 && X86_LOCAL_APIC)
>         select GENERIC_CLOCKEVENTS_MIN_ADJUST
> +       select GENERIC_CMDLINE
>         select GENERIC_CMOS_UPDATE
>         select GENERIC_CPU_AUTOPROBE
>         select GENERIC_CPU_VULNERABILITIES
> @@ -2368,49 +2369,6 @@ choice
>
>  endchoice
>
> -config CMDLINE_BOOL
> -       bool "Built-in kernel command line"
> -       help
> -         Allow for specifying boot arguments to the kernel at
> -         build time.  On some systems (e.g. embedded ones), it is
> -         necessary or convenient to provide some or all of the
> -         kernel boot arguments with the kernel itself (that is,
> -         to not rely on the boot loader to provide them.)
> -
> -         To compile command line arguments into the kernel,
> -         set this option to 'Y', then fill in the
> -         boot arguments in CONFIG_CMDLINE.
> -
> -         Systems with fully functional boot loaders (i.e. non-embedded)
> -         should leave this option set to 'N'.
> -
> -config CMDLINE
> -       string "Built-in kernel command string"
> -       depends on CMDLINE_BOOL
> -       default ""
> -       help
> -         Enter arguments here that should be compiled into the kernel
> -         image and used at boot time.  If the boot loader provides a
> -         command line at boot time, it is appended to this string to
> -         form the full kernel command line, when the system boots.
> -
> -         However, you can use the CONFIG_CMDLINE_OVERRIDE option to
> -         change this behavior.
> -
> -         In most cases, the command line (whether built-in or provided
> -         by the boot loader) should specify the device for the root
> -         file system.
> -
> -config CMDLINE_OVERRIDE
> -       bool "Built-in command line overrides boot loader arguments"
> -       depends on CMDLINE_BOOL && CMDLINE != ""
> -       help
> -         Set this option to 'Y' to have the kernel ignore the boot loader
> -         command line, and use ONLY the built-in command line.
> -
> -         This is used to work around broken boot loaders.  This should
> -         be set to 'N' under normal conditions.
> -
>  config MODIFY_LDT_SYSCALL
>         bool "Enable the LDT (local descriptor table)" if EXPERT
>         default y
> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> index 740f3bdb3f61..e748c3e5c1ae 100644
> --- a/arch/x86/kernel/setup.c
> +++ b/arch/x86/kernel/setup.c
> @@ -48,6 +48,7 @@
>  #include <asm/unwind.h>
>  #include <asm/vsyscall.h>
>  #include <linux/vmalloc.h>
> +#include <linux/cmdline.h>
>
>  /*
>   * max_low_pfn_mapped: highest directly mapped pfn < 4 GB
> @@ -162,9 +163,6 @@ unsigned long saved_video_mode;
>  #define RAMDISK_LOAD_FLAG              0x4000
>
>  static char __initdata command_line[COMMAND_LINE_SIZE];
> -#ifdef CONFIG_CMDLINE_BOOL
> -static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
> -#endif
>
>  #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
>  struct edd edd;
> @@ -884,19 +882,7 @@ void __init setup_arch(char **cmdline_p)
>         bss_resource.start = __pa_symbol(__bss_start);
>         bss_resource.end = __pa_symbol(__bss_stop)-1;
>
> -#ifdef CONFIG_CMDLINE_BOOL
> -#ifdef CONFIG_CMDLINE_OVERRIDE
> -       strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
> -#else
> -       if (builtin_cmdline[0]) {
> -               /* append boot loader cmdline to builtin */
> -               strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
> -               strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
> -               strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
> -       }
> -#endif
> -#endif
> -
> +       cmdline_add_builtin(boot_command_line, NULL, COMMAND_LINE_SIZE);
>         strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
>         *cmdline_p = command_line;
>
> diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
> index f14c4ff5839f..9538c9d4a0bc 100644
> --- a/drivers/firmware/efi/libstub/x86-stub.c
> +++ b/drivers/firmware/efi/libstub/x86-stub.c
> @@ -736,7 +736,7 @@ unsigned long efi_main(efi_handle_t handle,
>         }
>
>  #ifdef CONFIG_CMDLINE_BOOL

Does this CMDLINE_BOOL check need to be dropped as well?

> -       status = efi_parse_options(CONFIG_CMDLINE);
> +       status = efi_parse_options(CONFIG_CMDLINE_PREPEND " " CONFIG_CMDLINE_APPEND);
>         if (status != EFI_SUCCESS) {
>                 efi_err("Failed to parse options\n");
>                 goto fail;
> --
> 2.25.1
>