[PATCH v1 2/3] tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}*
Christophe Leroy
christophe.leroy at csgroup.eu
Sun Mar 7 05:09:30 AEDT 2021
Commit 6ac9b61786cc ("soc: fsl: qe: introduce qe_io{read,write}*
wrappers") added specific I/O accessors for qe because at that
time ioread/iowrite functions were sub-optimal on powerpc/32
compared to the architecture specific in_/out_ IO accessors.
But as ioread/iowrite accessors are now equivalent since
commit 894fa235eb4c ("powerpc: inline iomap accessors"),
use them in order to allow removal of the qe specific ones.
Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
drivers/tty/serial/ucc_uart.c | 124 +++++++++++++++++-----------------
1 file changed, 62 insertions(+), 62 deletions(-)
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index d6a8604157ab..f81261cb52b8 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -261,11 +261,11 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
struct qe_bd *bdp = qe_port->tx_bd_base;
while (1) {
- if (qe_ioread16be(&bdp->status) & BD_SC_READY)
+ if (ioread16be(&bdp->status) & BD_SC_READY)
/* This BD is not done, so return "not done" */
return 0;
- if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
+ if (ioread16be(&bdp->status) & BD_SC_WRAP)
/*
* This BD is done and it's the last one, so return
* "done"
@@ -344,10 +344,10 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
*p++ = port->x_char;
- qe_iowrite16be(1, &bdp->length);
+ iowrite16be(1, &bdp->length);
qe_setbits_be16(&bdp->status, BD_SC_READY);
/* Get next BD. */
- if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
+ if (ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->tx_bd_base;
else
bdp++;
@@ -366,7 +366,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
/* Pick next descriptor and fill from buffer */
bdp = qe_port->tx_cur;
- while (!(qe_ioread16be(&bdp->status) & BD_SC_READY) &&
+ while (!(ioread16be(&bdp->status) & BD_SC_READY) &&
(xmit->tail != xmit->head)) {
count = 0;
p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
@@ -379,11 +379,11 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
break;
}
- qe_iowrite16be(count, &bdp->length);
+ iowrite16be(count, &bdp->length);
qe_setbits_be16(&bdp->status, BD_SC_READY);
/* Get next BD. */
- if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
+ if (ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->tx_bd_base;
else
bdp++;
@@ -416,7 +416,7 @@ static void qe_uart_start_tx(struct uart_port *port)
container_of(port, struct uart_qe_port, port);
/* If we currently are transmitting, then just return */
- if (qe_ioread16be(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
+ if (ioread16be(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
return;
/* Otherwise, pump the port and start transmission */
@@ -471,14 +471,14 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
*/
bdp = qe_port->rx_cur;
while (1) {
- status = qe_ioread16be(&bdp->status);
+ status = ioread16be(&bdp->status);
/* If this one is empty, then we assume we've read them all */
if (status & BD_SC_EMPTY)
break;
/* get number of characters, and check space in RX buffer */
- i = qe_ioread16be(&bdp->length);
+ i = ioread16be(&bdp->length);
/* If we don't have enough room in RX buffer for the entire BD,
* then we try later, which will be the next RX interrupt.
@@ -512,7 +512,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
qe_clrsetbits_be16(&bdp->status,
BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID,
BD_SC_EMPTY);
- if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
+ if (ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->rx_bd_base;
else
bdp++;
@@ -569,8 +569,8 @@ static irqreturn_t qe_uart_int(int irq, void *data)
u16 events;
/* Clear the interrupts */
- events = qe_ioread16be(&uccp->ucce);
- qe_iowrite16be(events, &uccp->ucce);
+ events = ioread16be(&uccp->ucce);
+ iowrite16be(events, &uccp->ucce);
if (events & UCC_UART_UCCE_BRKE)
uart_handle_break(&qe_port->port);
@@ -601,17 +601,17 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
bdp = qe_port->rx_bd_base;
qe_port->rx_cur = qe_port->rx_bd_base;
for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
- qe_iowrite16be(BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
- qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
- qe_iowrite16be(0, &bdp->length);
+ iowrite16be(BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
+ iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ iowrite16be(0, &bdp->length);
bd_virt += qe_port->rx_fifosize;
bdp++;
}
/* */
- qe_iowrite16be(BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
- qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
- qe_iowrite16be(0, &bdp->length);
+ iowrite16be(BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
+ iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ iowrite16be(0, &bdp->length);
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
@@ -622,9 +622,9 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
qe_port->tx_cur = qe_port->tx_bd_base;
bdp = qe_port->tx_bd_base;
for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
- qe_iowrite16be(BD_SC_INTRPT, &bdp->status);
- qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
- qe_iowrite16be(0, &bdp->length);
+ iowrite16be(BD_SC_INTRPT, &bdp->status);
+ iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ iowrite16be(0, &bdp->length);
bd_virt += qe_port->tx_fifosize;
bdp++;
}
@@ -634,9 +634,9 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
qe_setbits_be16(&qe_port->tx_cur->status, BD_SC_P);
#endif
- qe_iowrite16be(BD_SC_WRAP | BD_SC_INTRPT, &bdp->status);
- qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
- qe_iowrite16be(0, &bdp->length);
+ iowrite16be(BD_SC_WRAP | BD_SC_INTRPT, &bdp->status);
+ iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ iowrite16be(0, &bdp->length);
}
/*
@@ -658,21 +658,21 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
/* Program the UCC UART parameter RAM */
- qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.rbmr);
- qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.tbmr);
- qe_iowrite16be(qe_port->rx_fifosize, &uccup->common.mrblr);
- qe_iowrite16be(0x10, &uccup->maxidl);
- qe_iowrite16be(1, &uccup->brkcr);
- qe_iowrite16be(0, &uccup->parec);
- qe_iowrite16be(0, &uccup->frmec);
- qe_iowrite16be(0, &uccup->nosec);
- qe_iowrite16be(0, &uccup->brkec);
- qe_iowrite16be(0, &uccup->uaddr[0]);
- qe_iowrite16be(0, &uccup->uaddr[1]);
- qe_iowrite16be(0, &uccup->toseq);
+ iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.rbmr);
+ iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.tbmr);
+ iowrite16be(qe_port->rx_fifosize, &uccup->common.mrblr);
+ iowrite16be(0x10, &uccup->maxidl);
+ iowrite16be(1, &uccup->brkcr);
+ iowrite16be(0, &uccup->parec);
+ iowrite16be(0, &uccup->frmec);
+ iowrite16be(0, &uccup->nosec);
+ iowrite16be(0, &uccup->brkec);
+ iowrite16be(0, &uccup->uaddr[0]);
+ iowrite16be(0, &uccup->uaddr[1]);
+ iowrite16be(0, &uccup->toseq);
for (i = 0; i < 8; i++)
- qe_iowrite16be(0xC000, &uccup->cchars[i]);
- qe_iowrite16be(0xc0ff, &uccup->rccm);
+ iowrite16be(0xC000, &uccup->cchars[i]);
+ iowrite16be(0xc0ff, &uccup->rccm);
/* Configure the GUMR registers for UART */
if (soft_uart) {
@@ -702,30 +702,30 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
#endif
/* Disable rx interrupts and clear all pending events. */
- qe_iowrite16be(0, &uccp->uccm);
- qe_iowrite16be(0xffff, &uccp->ucce);
- qe_iowrite16be(0x7e7e, &uccp->udsr);
+ iowrite16be(0, &uccp->uccm);
+ iowrite16be(0xffff, &uccp->ucce);
+ iowrite16be(0x7e7e, &uccp->udsr);
/* Initialize UPSMR */
- qe_iowrite16be(0, &uccp->upsmr);
+ iowrite16be(0, &uccp->upsmr);
if (soft_uart) {
- qe_iowrite16be(0x30, &uccup->supsmr);
- qe_iowrite16be(0, &uccup->res92);
- qe_iowrite32be(0, &uccup->rx_state);
- qe_iowrite32be(0, &uccup->rx_cnt);
- qe_iowrite8(0, &uccup->rx_bitmark);
- qe_iowrite8(10, &uccup->rx_length);
- qe_iowrite32be(0x4000, &uccup->dump_ptr);
- qe_iowrite8(0, &uccup->rx_temp_dlst_qe);
- qe_iowrite32be(0, &uccup->rx_frame_rem);
- qe_iowrite8(0, &uccup->rx_frame_rem_size);
+ iowrite16be(0x30, &uccup->supsmr);
+ iowrite16be(0, &uccup->res92);
+ iowrite32be(0, &uccup->rx_state);
+ iowrite32be(0, &uccup->rx_cnt);
+ iowrite8(0, &uccup->rx_bitmark);
+ iowrite8(10, &uccup->rx_length);
+ iowrite32be(0x4000, &uccup->dump_ptr);
+ iowrite8(0, &uccup->rx_temp_dlst_qe);
+ iowrite32be(0, &uccup->rx_frame_rem);
+ iowrite8(0, &uccup->rx_frame_rem_size);
/* Soft-UART requires TX to be 1X */
- qe_iowrite8(UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1,
+ iowrite8(UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1,
&uccup->tx_mode);
- qe_iowrite16be(0, &uccup->tx_state);
- qe_iowrite8(0, &uccup->resD4);
- qe_iowrite16be(0, &uccup->resD5);
+ iowrite16be(0, &uccup->tx_state);
+ iowrite8(0, &uccup->resD4);
+ iowrite16be(0, &uccup->resD5);
/* Set UART mode.
* Enable receive and transmit.
@@ -850,9 +850,9 @@ static void qe_uart_set_termios(struct uart_port *port,
struct ucc_slow __iomem *uccp = qe_port->uccp;
unsigned int baud;
unsigned long flags;
- u16 upsmr = qe_ioread16be(&uccp->upsmr);
+ u16 upsmr = ioread16be(&uccp->upsmr);
struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
- u16 supsmr = qe_ioread16be(&uccup->supsmr);
+ u16 supsmr = ioread16be(&uccup->supsmr);
u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */
/* Character length programmed into the mode register is the
@@ -950,10 +950,10 @@ static void qe_uart_set_termios(struct uart_port *port,
/* Update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
- qe_iowrite16be(upsmr, &uccp->upsmr);
+ iowrite16be(upsmr, &uccp->upsmr);
if (soft_uart) {
- qe_iowrite16be(supsmr, &uccup->supsmr);
- qe_iowrite8(char_length, &uccup->rx_length);
+ iowrite16be(supsmr, &uccup->supsmr);
+ iowrite8(char_length, &uccup->rx_length);
/* Soft-UART requires a 1X multiplier for TX */
qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
--
2.25.0
More information about the Linuxppc-dev
mailing list