[PATCH 4/5] CMDLINE: mips: convert to generic builtin command line
Daniel Walker
danielwa at cisco.com
Thu Mar 4 15:48:01 AEDT 2021
This updates the mips code to use the CONFIG_GENERIC_CMDLINE
option.
This deletes the option for MIPS_CMDLINE_BUILTIN_EXTEND
and replaces the functionality with generic code.
Cc: xe-linux-external at cisco.com
Signed-off-by: Ruslan Ruslichenko <rruslich at cisco.com>
Signed-off-by: Ruslan Bilovol <rbilovol at cisco.com>
Signed-off-by: Daniel Walker <danielwa at cisco.com>
---
arch/mips/Kconfig | 4 +---
arch/mips/Kconfig.debug | 44 ----------------------------------------
arch/mips/kernel/setup.c | 37 +++++----------------------------
3 files changed, 6 insertions(+), 79 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0a17bedf4f0d..7c07b3bca9fc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -23,6 +23,7 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
@@ -3171,9 +3172,6 @@ choice
config MIPS_CMDLINE_FROM_BOOTLOADER
bool "Bootloader kernel arguments if available"
- config MIPS_CMDLINE_BUILTIN_EXTEND
- depends on CMDLINE_BOOL
- bool "Extend builtin kernel arguments with bootloader arguments"
endchoice
endmenu
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 7a8d94cdd493..b5a099c74eb6 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -30,50 +30,6 @@ config EARLY_PRINTK_8250
config USE_GENERIC_EARLY_PRINTK_8250
bool
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- For most systems, it is firmware or second stage bootloader that
- by default specifies the kernel command line options. However,
- it might be necessary or advantageous to either override the
- default kernel command line or add a few extra options to it.
- For such cases, this option allows you to hardcode your own
- command line options directly into the kernel. For that, you
- should choose 'Y' here, and fill in the extra boot arguments
- in CONFIG_CMDLINE.
-
- The built-in options will be concatenated to the default command
- line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
- command line will be ignored and replaced by the built-in string.
-
- Most MIPS systems will normally expect 'N' here and rely upon
- the command line from the firmware or the second-stage bootloader.
-
-config CMDLINE
- string "Default kernel command string"
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, and for the cases
- when you want to add some extra options to the command line or ignore
- the default command line, you can supply some command-line options at
- build time by entering them here. In other cases you can specify
- kernel args so that you don't have to set them up in board prom
- initialization routines.
-
- For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
- options.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firmware arguments"
- depends on CMDLINE_BOOL
- help
- By setting this option to 'Y' you will have your kernel ignore
- command line arguments from firmware or second stage bootloader.
- Instead, the built-in command line will be used exclusively.
-
- Normally, you will choose 'N' here.
-
config SB1XXX_CORELIS
bool "Corelis Debugger"
depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7e1f8e277437..b7e9c1ffffc9 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -23,6 +23,7 @@
#include <linux/debugfs.h>
#include <linux/kexec.h>
#include <linux/sizes.h>
+#include <linux/cmdline.h>
#include <linux/device.h>
#include <linux/dma-map-ops.h>
#include <linux/decompress/generic.h>
@@ -67,12 +68,6 @@ EXPORT_SYMBOL(mips_machtype);
static char __initdata command_line[COMMAND_LINE_SIZE];
char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE;
-#else
-static const char builtin_cmdline[] __initconst = "";
-#endif
-
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
@@ -546,27 +541,7 @@ static void __init bootcmdline_init(void)
{
bool dt_bootargs = false;
- /*
- * If CMDLINE_OVERRIDE is enabled then initializing the command line is
- * trivial - we simply use the built-in command line unconditionally &
- * unmodified.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- return;
- }
-
- /*
- * If the user specified a built-in command line &
- * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
- * prepended to arguments from the bootloader or DT so we'll copy them
- * to the start of boot_command_line here. Otherwise, empty
- * boot_command_line to undo anything early_init_dt_scan_chosen() did.
- */
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- else
- boot_command_line[0] = 0;
+ boot_command_line[0] = 0;
#ifdef CONFIG_OF_EARLY_FLATTREE
/*
@@ -589,12 +564,9 @@ static void __init bootcmdline_init(void)
bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE);
/*
- * If the user specified a built-in command line & we didn't already
- * prepend it, we append it to boot_command_line here.
+ * Use the generic system for builtin prepend and append.
*/
- if (IS_ENABLED(CONFIG_CMDLINE_BOOL) &&
- !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE);
+ cmdline_add_builtin(boot_command_line, NULL, COMMAND_LINE_SIZE);
}
/*
@@ -626,6 +598,7 @@ static void __init arch_mem_init(char **cmdline_p)
memblock_set_bottom_up(true);
bootcmdline_init();
+
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
--
2.25.1
More information about the Linuxppc-dev
mailing list