[PATCH] powerpc/64s: fix hash page fault interrupt handler

Nicholas Piggin npiggin at gmail.com
Tue Jun 29 11:50:57 AEST 2021


The early bad fault or key fault test in do_hash_fault() ends up calling
into ___do_page_fault without having gone through an interrupt handler
wrapper (except the initial _RAW one). This can end up calling local irq
functions while the interrupt has not been reconciled, which will likely
cause crashes and it trips up on a later patch that adds more assertions.

pkey_exec_prot from selftests causes this path to be executed.

There is no real reason to run the in_nmi() test should be performed
before the key fault check. In fact if a perf interrupt in the hash
fault code did a stack walk that was made to take a key fault somehow
then running ___do_page_fault could possibly cause another hash fault
causing problems. Move the in_nmi() test first, and then do everything
else inside the regular interrupt handler function.

Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Reported-by: Sachin Sant <sachinp at linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/mm/book3s64/hash_utils.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 96d9aa164007..ac5720371c0d 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -1522,8 +1522,8 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap,
 }
 EXPORT_SYMBOL_GPL(hash_page);
 
-DECLARE_INTERRUPT_HANDLER_RET(__do_hash_fault);
-DEFINE_INTERRUPT_HANDLER_RET(__do_hash_fault)
+DECLARE_INTERRUPT_HANDLER(__do_hash_fault);
+DEFINE_INTERRUPT_HANDLER(__do_hash_fault)
 {
 	unsigned long ea = regs->dar;
 	unsigned long dsisr = regs->dsisr;
@@ -1533,6 +1533,11 @@ DEFINE_INTERRUPT_HANDLER_RET(__do_hash_fault)
 	unsigned int region_id;
 	long err;
 
+	if (unlikely(dsisr & (DSISR_BAD_FAULT_64S | DSISR_KEYFAULT))) {
+		hash__do_page_fault(regs);
+		return;
+	}
+
 	region_id = get_region_id(ea);
 	if ((region_id == VMALLOC_REGION_ID) || (region_id == IO_REGION_ID))
 		mm = &init_mm;
@@ -1571,9 +1576,10 @@ DEFINE_INTERRUPT_HANDLER_RET(__do_hash_fault)
 			bad_page_fault(regs, SIGBUS);
 		}
 		err = 0;
-	}
 
-	return err;
+	} else if (err) {
+		hash__do_page_fault(regs);
+	}
 }
 
 /*
@@ -1582,13 +1588,6 @@ DEFINE_INTERRUPT_HANDLER_RET(__do_hash_fault)
  */
 DEFINE_INTERRUPT_HANDLER_RAW(do_hash_fault)
 {
-	unsigned long dsisr = regs->dsisr;
-
-	if (unlikely(dsisr & (DSISR_BAD_FAULT_64S | DSISR_KEYFAULT))) {
-		hash__do_page_fault(regs);
-		return 0;
-	}
-
 	/*
 	 * If we are in an "NMI" (e.g., an interrupt when soft-disabled), then
 	 * don't call hash_page, just fail the fault. This is required to
@@ -1607,8 +1606,7 @@ DEFINE_INTERRUPT_HANDLER_RAW(do_hash_fault)
 		return 0;
 	}
 
-	if (__do_hash_fault(regs))
-		hash__do_page_fault(regs);
+	__do_hash_fault(regs);
 
 	return 0;
 }
-- 
2.23.0



More information about the Linuxppc-dev mailing list