[PATCH v4 7/7] powerpc/pseries: Add support for FORM2 associativity

[Aneesh Kumar K.V]

Daniel Henrique Barboza <danielhb413 at gmail.com> writes:

> On 6/17/21 1:51 PM, Aneesh Kumar K.V wrote:
>> PAPR interface currently supports two different ways of communicating resource
>> grouping details to the OS. These are referred to as Form 0 and Form 1
>> associativity grouping. Form 0 is the older format and is now considered
>> deprecated. This patch adds another resource grouping named FORM2.
>> 
>> Signed-off-by: Daniel Henrique Barboza <danielhb413 at gmail.com>
>> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar at linux.ibm.com>
>> ---
>>   Documentation/powerpc/associativity.rst   | 135 ++++++++++++++++++++
>>   arch/powerpc/include/asm/firmware.h       |   3 +-
>>   arch/powerpc/include/asm/prom.h           |   1 +
>>   arch/powerpc/kernel/prom_init.c           |   3 +-
>>   arch/powerpc/mm/numa.c                    | 149 +++++++++++++++++++++-
>>   arch/powerpc/platforms/pseries/firmware.c |   1 +
>>   6 files changed, 286 insertions(+), 6 deletions(-)
>>   create mode 100644 Documentation/powerpc/associativity.rst
>> 
>> diff --git a/Documentation/powerpc/associativity.rst b/Documentation/powerpc/associativity.rst
>> new file mode 100644
>> index 000000000000..93be604ac54d
>> --- /dev/null
>> +++ b/Documentation/powerpc/associativity.rst
>> @@ -0,0 +1,135 @@
>> +============================
>> +NUMA resource associativity
>> +=============================
>> +
>> +Associativity represents the groupings of the various platform resources into
>> +domains of substantially similar mean performance relative to resources outside
>> +of that domain. Resources subsets of a given domain that exhibit better
>> +performance relative to each other than relative to other resources subsets
>> +are represented as being members of a sub-grouping domain. This performance
>> +characteristic is presented in terms of NUMA node distance within the Linux kernel.
>> +From the platform view, these groups are also referred to as domains.
>> +
>> +PAPR interface currently supports different ways of communicating these resource
>> +grouping details to the OS. These are referred to as Form 0, Form 1 and Form2
>> +associativity grouping. Form 0 is the older format and is now considered deprecated.
>> +
>> +Hypervisor indicates the type/form of associativity used via "ibm,arcitecture-vec-5 property".
>> +Bit 0 of byte 5 in the "ibm,architecture-vec-5" property indicates usage of Form 0 or Form 1.
>> +A value of 1 indicates the usage of Form 1 associativity. For Form 2 associativity
>> +bit 2 of byte 5 in the "ibm,architecture-vec-5" property is used.
>> +
>> +Form 0
>> +-----
>> +Form 0 associativity supports only two NUMA distance (LOCAL and REMOTE).
>> +
>> +Form 1
>> +-----
>> +With Form 1 a combination of ibm,associativity-reference-points and ibm,associativity
>> +device tree properties are used to determine the NUMA distance between resource groups/domains.
>> +
>> +The “ibm,associativity” property contains one or more lists of numbers (domainID)
>> +representing the resource’s platform grouping domains.
>> +
>> +The “ibm,associativity-reference-points” property contains one or more list of numbers
>> +(domainID index) that represents the 1 based ordinal in the associativity lists.
>> +The list of domainID index represnets increasing hierachy of resource grouping.
>> +
>> +ex:
>> +{ primary domainID index, secondary domainID index, tertiary domainID index.. }
>> +
>> +Linux kernel uses the domainID at the primary domainID index as the NUMA node id.
>> +Linux kernel computes NUMA distance between two domains by recursively comparing
>> +if they belong to the same higher-level domains. For mismatch at every higher
>> +level of the resource group, the kernel doubles the NUMA distance between the
>> +comparing domains.
>> +
>> +Form 2
>> +-------
>> +Form 2 associativity format adds separate device tree properties representing NUMA node distance
>> +thereby making the node distance computation flexible. Form 2 also allows flexible primary
>> +domain numbering. With numa distance computation now detached from the index value of
>> +"ibm,associativity" property, Form 2 allows a large number of primary domain ids at the
>> +same domainID index representing resource groups of different performance/latency characteristics.
>> +
>> +Hypervisor indicates the usage of FORM2 associativity using bit 2 of byte 5 in the
>> +"ibm,architecture-vec-5" property.
>> +
>> +"ibm,numa-lookup-index-table" property contains one or more list numbers representing
>> +the domainIDs present in the system. The offset of the domainID in this property is considered
>> +the domainID index.
>> +
>> +prop-encoded-array: The number N of the domainIDs encoded as with encode-int, followed by
>> +N domainID encoded as with encode-int
>> +
>> +For ex:
>> +ibm,numa-lookup-index-table =  {4, 0, 8, 250, 252}, domainID index for domainID 8 is 1.
>> +
>> +"ibm,numa-distance-table" property contains one or more list of numbers representing the NUMA
>> +distance between resource groups/domains present in the system.
>> +
>> +prop-encoded-array: The number N of the distance values encoded as with encode-int, followed by
>> +N distance values encoded as with encode-bytes. The max distance value we could encode is 255.
>> +
>> +For ex:
>> +ibm,numa-lookup-index-table =  {3, 0, 8, 40}
>> +ibm,numa-distance-table     =  {9, 10, 20, 80, 20, 10, 160, 80, 160, 10}
>> +
>> +  | 0    8   40
>> +--|------------
>> +  |
>> +0 | 10   20  80
>> +  |
>> +8 | 20   10  160
>> +  |
>> +40| 80   160  10
>> +
>> +
>> +"ibm,associativity" property for resources in node 0, 8 and 40
>> +
>> +{ 3, 6, 7, 0 }
>> +{ 3, 6, 9, 8 }
>> +{ 3, 6, 7, 40}
>> +
>> +With "ibm,associativity-reference-points"  { 0x3 }
>
> With this configuration, would the following ibm,associativity arrays
> also be valid?
>
>
> { 3, 0, 0, 0 }
> { 3, 0, 0, 8 }
> { 3, 0, 0, 40}
>

Yes

> If yes, then we need a way to tell that the associativity domains assignment
> are optional, and FORM2 relies solely on finding out the domainID of the
> resource (0, 8 and 40) to retrieve the domainID index, and with this
> index all performance metrics can be retrieved from the numa-* properties
> (numa-distance-table, numa-bandwidth-table ...).
>

Where do you suggest we clarify that? I agree that it is not explicitly
mentioned. But we describe the details of how we find the numa distance
with example in the document.

> Retrieving the resource domainID is done by using ibm,associativity-reference-points.
>
> This will allow the platform to implement FORM2 such as:
>
> { 1, 0 }
> { 1, 8 }
> { 1, 40 }
>   
> - ref-points: { 0x1 }
>
> If the platform chooses to do so.
>

That is correct.

>
>> +
>> +Each resource (drcIndex) now also supports additional optional device tree properties.
>> +These properties are marked optional because the platform can choose not to export
>> +them and provide the system topology details using the earlier defined device tree
>> +properties alone. The optional device tree properties are used when adding new resources
>> +(DLPAR) and when the platform didn't provide the topology details of the domain which
>> +contains the newly added resource during boot.
>> +
>> +"ibm,numa-lookup-index" property contains a number representing the domainID index to be used
>> +when building the NUMA distance of the numa node to which this resource belongs. This can
>> +be looked at as the index at which this new domainID would have appeared in
>> +"ibm,numa-lookup-index-table" if the domain was present during boot. The domainID
>> +of the new resource can be obtained from the existing "ibm,associativity" property. This
>> +can be used to build distance information of a newly onlined NUMA node via DLPAR operation.
>> +The value is 1 based array index value.
>> +
>> +prop-encoded-array: An integer encoded as with encode-int specifying the domainID index
>> +
>> +"ibm,numa-distance" property contains one or more list of numbers presenting the NUMA distance
>> +from this resource domain to other resources.
>> +
>> +prop-encoded-array: The number N of the distance values encoded as with encode-int, followed by
>> +N distance values encoded as with encode-bytes. The max distance value we could encode is 255.
>> +
>> +For ex:
>> +ibm,associativity     = { 4, 5, 10, 50}
>> +ibm,numa-lookup-index = { 4 }
>> +ibm,numa-distance   =  {8, 160, 255, 80, 10, 160, 255, 80, 10}
>> +
>> +resulting in a new toplogy as below.
>> +  | 0    8   40   50
>> +--|------------------
>> +  |
>> +0 | 10   20  80   160
>> +  |
>> +8 | 20   10  160  255
>> +  |
>> +40| 80   160  10  80
>> +  |
>> +50| 160  255  80  10
>> +
>
> I see there is no mention of the special PAPR SCM handling. I saw in
> one of the your replies of v1:
>
> "Another option is to make sure that numa-distance-value is populated
> such that PMEMB distance indicates it is closer to node0 when compared
> to node1. ie, node_distance[40][0] < node_distance[40][1]. One could
> possibly infer the grouping based on the distance value and not deepend
> on ibm,associativity for that purpose."
>
>
> Is that was we're supposed to do with PAPR SCM? I'm not sure how that
> affects NVDIMM support in QEMU with FORM2.
>
>

yes that is what we are doing with this version of the patchset (v4)
version. We can drop the nvdimm specific changes from Qemu.

-aneesh