[PATCH] soc: fsl: qe: convert QE interrupt controller to platform_device
Li Yang
leoyang.li at nxp.com
Thu Jul 15 08:29:38 AEST 2021
On Mon, Jul 5, 2021 at 6:12 AM Maxim Kochetkov <fido_max at inbox.ru> wrote:
>
> Since 5.13 QE's ucc nodes can't get interrupts from devicetree:
>
> ucc at 2000 {
> cell-index = <1>;
> reg = <0x2000 0x200>;
> interrupts = <32>;
> interrupt-parent = <&qeic>;
> };
>
> Now fw_devlink expects driver to create and probe a struct device
> for interrupt controller.
>
> So lets convert this driver to simple platform_device with probe().
>
> [1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com
> Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
> Fixes: ea718c699055 ("Revert "Revert "driver core: Set fw_devlink=on by default""")
> Signed-off-by: Maxim Kochetkov <fido_max at inbox.ru>
> ---
> drivers/soc/fsl/qe/qe_ic.c | 38 +++++++++++++++++++++++---------------
> 1 file changed, 23 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
> index 3f711c1a0996..03d291376895 100644
> --- a/drivers/soc/fsl/qe/qe_ic.c
> +++ b/drivers/soc/fsl/qe/qe_ic.c
> @@ -23,6 +23,7 @@
> #include <linux/signal.h>
> #include <linux/device.h>
> #include <linux/spinlock.h>
> +#include <linux/platform_device.h>
> #include <asm/irq.h>
> #include <asm/io.h>
> #include <soc/fsl/qe/qe.h>
> @@ -404,27 +405,28 @@ static void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
> chip->irq_eoi(&desc->irq_data);
> }
>
> -static void __init qe_ic_init(struct device_node *node)
> +static int qe_ic_init(struct platform_device *pdev)
> {
> void (*low_handler)(struct irq_desc *desc);
> void (*high_handler)(struct irq_desc *desc);
> struct qe_ic *qe_ic;
> struct resource res;
> + struct device_node *node = pdev->dev.of_node;
> u32 ret;
>
> ret = of_address_to_resource(node, 0, &res);
> if (ret)
> - return;
> + return -ENODEV;
>
> qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
> if (qe_ic == NULL)
> - return;
> + return -ENOMEM;
>
> qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
> &qe_ic_host_ops, qe_ic);
> if (qe_ic->irqhost == NULL) {
> kfree(qe_ic);
> - return;
> + return -ENODEV;
> }
>
> qe_ic->regs = ioremap(res.start, resource_size(&res));
> @@ -437,7 +439,7 @@ static void __init qe_ic_init(struct device_node *node)
> if (!qe_ic->virq_low) {
> printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
> kfree(qe_ic);
> - return;
> + return -ENODEV;
> }
> if (qe_ic->virq_high != qe_ic->virq_low) {
> low_handler = qe_ic_cascade_low;
> @@ -456,20 +458,26 @@ static void __init qe_ic_init(struct device_node *node)
> irq_set_handler_data(qe_ic->virq_high, qe_ic);
> irq_set_chained_handler(qe_ic->virq_high, high_handler);
> }
> + return 0;
> }
> +static const struct of_device_id qe_ic_ids[] = {
> + { .compatible = "fsl,qe-ic"},
> + { .compatible = "qeic"},
>From the original code, this should be type = "qeic". It is not
defined in current binding but probably needed for backward
compatibility.
It would be great if you can also deal with the comments from Dan too. Thanks.
> + {},
> +};
>
> -static int __init qe_ic_of_init(void)
> +static struct platform_driver qe_ic_driver =
> {
> - struct device_node *np;
> + .driver = {
> + .name = "qe-ic",
> + .of_match_table = qe_ic_ids,
> + },
> + .probe = qe_ic_init,
> +};
>
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (!np) {
> - np = of_find_node_by_type(NULL, "qeic");
> - if (!np)
> - return -ENODEV;
> - }
> - qe_ic_init(np);
> - of_node_put(np);
> +static int __init qe_ic_of_init(void)
> +{
> + platform_driver_register(&qe_ic_driver);
> return 0;
> }
> subsys_initcall(qe_ic_of_init);
> --
> 2.31.1
>
More information about the Linuxppc-dev
mailing list