[RESEND PATCH v4 05/11] powerpc/64s: Add ability to skip SLB preload
Christopher M. Riedl
cmr at linux.ibm.com
Thu Jul 1 16:53:04 AEST 2021
On Thu Jul 1, 2021 at 1:04 AM CDT, Nicholas Piggin wrote:
> Excerpts from Christopher M. Riedl's message of July 1, 2021 3:28 pm:
> > On Wed Jun 30, 2021 at 11:15 PM CDT, Nicholas Piggin wrote:
> >> Excerpts from Christopher M. Riedl's message of July 1, 2021 1:48 pm:
> >> > On Sun Jun 20, 2021 at 10:13 PM CDT, Daniel Axtens wrote:
> >> >> "Christopher M. Riedl" <cmr at linux.ibm.com> writes:
> >> >>
> >> >> > Switching to a different mm with Hash translation causes SLB entries to
> >> >> > be preloaded from the current thread_info. This reduces SLB faults, for
> >> >> > example when threads share a common mm but operate on different address
> >> >> > ranges.
> >> >> >
> >> >> > Preloading entries from the thread_info struct may not always be
> >> >> > appropriate - such as when switching to a temporary mm. Introduce a new
> >> >> > boolean in mm_context_t to skip the SLB preload entirely. Also move the
> >> >> > SLB preload code into a separate function since switch_slb() is already
> >> >> > quite long. The default behavior (preloading SLB entries from the
> >> >> > current thread_info struct) remains unchanged.
> >> >> >
> >> >> > Signed-off-by: Christopher M. Riedl <cmr at linux.ibm.com>
> >> >> >
> >> >> > ---
> >> >> >
> >> >> > v4: * New to series.
> >> >> > ---
> >> >> > arch/powerpc/include/asm/book3s/64/mmu.h | 3 ++
> >> >> > arch/powerpc/include/asm/mmu_context.h | 13 ++++++
> >> >> > arch/powerpc/mm/book3s64/mmu_context.c | 2 +
> >> >> > arch/powerpc/mm/book3s64/slb.c | 56 ++++++++++++++----------
> >> >> > 4 files changed, 50 insertions(+), 24 deletions(-)
> >> >> >
> >> >> > diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
> >> >> > index eace8c3f7b0a1..b23a9dcdee5af 100644
> >> >> > --- a/arch/powerpc/include/asm/book3s/64/mmu.h
> >> >> > +++ b/arch/powerpc/include/asm/book3s/64/mmu.h
> >> >> > @@ -130,6 +130,9 @@ typedef struct {
> >> >> > u32 pkey_allocation_map;
> >> >> > s16 execute_only_pkey; /* key holding execute-only protection */
> >> >> > #endif
> >> >> > +
> >> >> > + /* Do not preload SLB entries from thread_info during switch_slb() */
> >> >> > + bool skip_slb_preload;
> >> >> > } mm_context_t;
> >> >> >
> >> >> > static inline u16 mm_ctx_user_psize(mm_context_t *ctx)
> >> >> > diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
> >> >> > index 4bc45d3ed8b0e..264787e90b1a1 100644
> >> >> > --- a/arch/powerpc/include/asm/mmu_context.h
> >> >> > +++ b/arch/powerpc/include/asm/mmu_context.h
> >> >> > @@ -298,6 +298,19 @@ static inline int arch_dup_mmap(struct mm_struct *oldmm,
> >> >> > return 0;
> >> >> > }
> >> >> >
> >> >> > +#ifdef CONFIG_PPC_BOOK3S_64
> >> >> > +
> >> >> > +static inline void skip_slb_preload_mm(struct mm_struct *mm)
> >> >> > +{
> >> >> > + mm->context.skip_slb_preload = true;
> >> >> > +}
> >> >> > +
> >> >> > +#else
> >> >> > +
> >> >> > +static inline void skip_slb_preload_mm(struct mm_struct *mm) {}
> >> >> > +
> >> >> > +#endif /* CONFIG_PPC_BOOK3S_64 */
> >> >> > +
> >> >> > #include <asm-generic/mmu_context.h>
> >> >> >
> >> >> > #endif /* __KERNEL__ */
> >> >> > diff --git a/arch/powerpc/mm/book3s64/mmu_context.c b/arch/powerpc/mm/book3s64/mmu_context.c
> >> >> > index c10fc8a72fb37..3479910264c59 100644
> >> >> > --- a/arch/powerpc/mm/book3s64/mmu_context.c
> >> >> > +++ b/arch/powerpc/mm/book3s64/mmu_context.c
> >> >> > @@ -202,6 +202,8 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
> >> >> > atomic_set(&mm->context.active_cpus, 0);
> >> >> > atomic_set(&mm->context.copros, 0);
> >> >> >
> >> >> > + mm->context.skip_slb_preload = false;
> >> >> > +
> >> >> > return 0;
> >> >> > }
> >> >> >
> >> >> > diff --git a/arch/powerpc/mm/book3s64/slb.c b/arch/powerpc/mm/book3s64/slb.c
> >> >> > index c91bd85eb90e3..da0836cb855af 100644
> >> >> > --- a/arch/powerpc/mm/book3s64/slb.c
> >> >> > +++ b/arch/powerpc/mm/book3s64/slb.c
> >> >> > @@ -441,10 +441,39 @@ static void slb_cache_slbie_user(unsigned int index)
> >> >> > asm volatile("slbie %0" : : "r" (slbie_data));
> >> >> > }
> >> >> >
> >> >> > +static void preload_slb_entries(struct task_struct *tsk, struct mm_struct *mm)
> >> >> Should this be explicitly inline or even __always_inline? I'm thinking
> >> >> switch_slb is probably a fairly hot path on hash?
> >> >
> >> > Yes absolutely. I'll make this change in v5.
> >> >
> >> >>
> >> >> > +{
> >> >> > + struct thread_info *ti = task_thread_info(tsk);
> >> >> > + unsigned char i;
> >> >> > +
> >> >> > + /*
> >> >> > + * We gradually age out SLBs after a number of context switches to
> >> >> > + * reduce reload overhead of unused entries (like we do with FP/VEC
> >> >> > + * reload). Each time we wrap 256 switches, take an entry out of the
> >> >> > + * SLB preload cache.
> >> >> > + */
> >> >> > + tsk->thread.load_slb++;
> >> >> > + if (!tsk->thread.load_slb) {
> >> >> > + unsigned long pc = KSTK_EIP(tsk);
> >> >> > +
> >> >> > + preload_age(ti);
> >> >> > + preload_add(ti, pc);
> >> >> > + }
> >> >> > +
> >> >> > + for (i = 0; i < ti->slb_preload_nr; i++) {
> >> >> > + unsigned char idx;
> >> >> > + unsigned long ea;
> >> >> > +
> >> >> > + idx = (ti->slb_preload_tail + i) % SLB_PRELOAD_NR;
> >> >> > + ea = (unsigned long)ti->slb_preload_esid[idx] << SID_SHIFT;
> >> >> > +
> >> >> > + slb_allocate_user(mm, ea);
> >> >> > + }
> >> >> > +}
> >> >> > +
> >> >> > /* Flush all user entries from the segment table of the current processor. */
> >> >> > void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
> >> >> > {
> >> >> > - struct thread_info *ti = task_thread_info(tsk);
> >> >> > unsigned char i;
> >> >> >
> >> >> > /*
> >> >> > @@ -502,29 +531,8 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
> >> >> >
> >> >> > copy_mm_to_paca(mm);
> >> >> >
> >> >> > - /*
> >> >> > - * We gradually age out SLBs after a number of context switches to
> >> >> > - * reduce reload overhead of unused entries (like we do with FP/VEC
> >> >> > - * reload). Each time we wrap 256 switches, take an entry out of the
> >> >> > - * SLB preload cache.
> >> >> > - */
> >> >> > - tsk->thread.load_slb++;
> >> >> > - if (!tsk->thread.load_slb) {
> >> >> > - unsigned long pc = KSTK_EIP(tsk);
> >> >> > -
> >> >> > - preload_age(ti);
> >> >> > - preload_add(ti, pc);
> >> >> > - }
> >> >> > -
> >> >> > - for (i = 0; i < ti->slb_preload_nr; i++) {
> >> >> > - unsigned char idx;
> >> >> > - unsigned long ea;
> >> >> > -
> >> >> > - idx = (ti->slb_preload_tail + i) % SLB_PRELOAD_NR;
> >> >> > - ea = (unsigned long)ti->slb_preload_esid[idx] << SID_SHIFT;
> >> >> > -
> >> >> > - slb_allocate_user(mm, ea);
> >> >> > - }
> >> >> > + if (!mm->context.skip_slb_preload)
> >> >> > + preload_slb_entries(tsk, mm);
> >> >>
> >> >> Should this be wrapped in likely()?
> >> >
> >> > Seems like a good idea - yes.
> >> >
> >> >>
> >> >> >
> >> >> > /*
> >> >> > * Synchronize slbmte preloads with possible subsequent user memory
> >> >>
> >> >> Right below this comment is the isync. It seems to be specifically
> >> >> concerned with synchronising preloaded slbs. Do you need it if you are
> >> >> skipping SLB preloads?
> >> >>
> >> >> It's probably not a big deal to have an extra isync in the fairly rare
> >> >> path when we're skipping preloads, but I thought I'd check.
> >> >
> >> > I don't _think_ we need the `isync` if we are skipping the SLB preloads,
> >> > but then again it was always in the code-path before. If someone can
> >> > make a compelling argument to drop it when not preloading SLBs I will,
> >> > otherwise (considering some of the other non-obvious things I stepped
> >> > into with the Hash code) I will keep it here for now.
> >>
> >> The ISA says slbia wants an isync afterward, so we probably should keep
> >> it. The comment is a bit misleading in that case.
> >>
> >> Why isn't preloading appropriate for a temporary mm?
> >
> > The preloaded entries come from the thread_info struct which isn't
> > necessarily related to the temporary mm at all. I saw SLB multihits
> > while testing this series with my LKDTM test where the "patching
> > address" (userspace address for the temporary mapping w/
> > write-permissions) ends up in a thread's preload list and then we
> > explicitly insert it again in map_patch() when trying to patch. At that
> > point the SLB multihit triggers.
>
> Hmm, so what if we use a mm, take some SLB faults then unuse it and
> use a different one? I wonder if kthread_use_mm has existing problems
> with this incorrect SLB preloading. Quite possibly. We should clear
> the preload whenever mm changes I think. That should cover this as
> well.
I actually did this initially but thought it was a bit too intrusive to
include as part of this series and hurt performance. I agree that
preloading the SLB from the thread may be a problem in general when
switching in/out an mm.
kthread_use_mm may not be affected unless we explicitly insert some SLB
entries which could collide with an existing preload (which I don't
think we do anywhere until this series).
>
> Thanks,
> Nick
More information about the Linuxppc-dev
mailing list