[PATCH v7 42/42] powerpc/64s: power4 nap fixup in C

Nicholas Piggin npiggin at gmail.com
Sun Jan 31 00:08:52 AEDT 2021


There is no need for this to be in asm, use the new intrrupt entry wrapper.

Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/include/asm/interrupt.h   | 15 +++++++++
 arch/powerpc/include/asm/processor.h   |  1 +
 arch/powerpc/include/asm/thread_info.h |  6 ++++
 arch/powerpc/kernel/exceptions-64s.S   | 45 --------------------------
 arch/powerpc/kernel/idle_book3s.S      |  4 +++
 5 files changed, 26 insertions(+), 45 deletions(-)

diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 4badb3e51c19..25f2420b1965 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -8,6 +8,16 @@
 #include <asm/ftrace.h>
 #include <asm/runlatch.h>
 
+static inline void nap_adjust_return(struct pt_regs *regs)
+{
+#ifdef CONFIG_PPC_970_NAP
+	if (unlikely(test_thread_local_flags(_TLF_NAPPING))) {
+		clear_thread_local_flags(_TLF_NAPPING);
+		regs->nip = (unsigned long)power4_idle_nap_return;
+	}
+#endif
+}
+
 struct interrupt_state {
 #ifdef CONFIG_PPC_BOOK3E_64
 	enum ctx_state ctx_state;
@@ -98,6 +108,9 @@ static inline void interrupt_async_exit_prepare(struct pt_regs *regs, struct int
 {
 	irq_exit();
 	interrupt_exit_prepare(regs, state);
+
+	/* Adjust at exit so the main handler sees the true NIA */
+	nap_adjust_return(regs);
 }
 
 struct interrupt_nmi_state {
@@ -151,6 +164,8 @@ static inline void interrupt_nmi_exit_prepare(struct pt_regs *regs, struct inter
 			radix_enabled() || (mfmsr() & MSR_DR))
 		nmi_exit();
 
+	nap_adjust_return(regs);
+
 #ifdef CONFIG_PPC64
 	if (TRAP(regs) != 0x900 && TRAP(regs) != 0xf00 && TRAP(regs) != 0x260)
 		this_cpu_set_ftrace_enabled(state->ftrace_enabled);
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 8acc3590c971..eedc3c775141 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -393,6 +393,7 @@ extern unsigned long isa300_idle_stop_mayloss(unsigned long psscr_val);
 extern unsigned long isa206_idle_insn_mayloss(unsigned long type);
 #ifdef CONFIG_PPC_970_NAP
 extern void power4_idle_nap(void);
+void power4_idle_nap_return(void);
 #endif
 
 extern unsigned long cpuidle_disable;
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 386d576673a1..bf137151100b 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -152,6 +152,12 @@ void arch_setup_new_exec(void);
 
 #ifndef __ASSEMBLY__
 
+static inline void clear_thread_local_flags(unsigned int flags)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->local_flags &= ~flags;
+}
+
 static inline bool test_thread_local_flags(unsigned int flags)
 {
 	struct thread_info *ti = current_thread_info();
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 27351276c54b..5478ffa85603 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -692,25 +692,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	ld	r1,GPR1(r1)
 .endm
 
-/*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP				\
-BEGIN_FTR_SECTION				\
-	ld	r11, PACA_THREAD_INFO(r13);	\
-	ld	r9,TI_LOCAL_FLAGS(r11);		\
-	andi.	r10,r9,_TLF_NAPPING;		\
-	bnel	power4_fixup_nap;		\
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
 /*
  * There are a few constraints to be concerned with.
  * - Real mode exceptions code/data must be located at their physical location.
@@ -1248,7 +1229,6 @@ EXC_COMMON_BEGIN(machine_check_common)
 	 */
 	GEN_COMMON machine_check
 
-	FINISH_NAP
 	/* Enable MSR_RI when finished with PACA_EXMC */
 	li	r10,MSR_RI
 	mtmsrd 	r10,1
@@ -1576,7 +1556,6 @@ EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
 EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
 EXC_COMMON_BEGIN(hardware_interrupt_common)
 	GEN_COMMON hardware_interrupt
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_IRQ
 	b	interrupt_return
@@ -1761,7 +1740,6 @@ EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80)
 EXC_VIRT_END(decrementer, 0x4900, 0x80)
 EXC_COMMON_BEGIN(decrementer_common)
 	GEN_COMMON decrementer
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	timer_interrupt
 	b	interrupt_return
@@ -1846,7 +1824,6 @@ EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100)
 EXC_VIRT_END(doorbell_super, 0x4a00, 0x100)
 EXC_COMMON_BEGIN(doorbell_super_common)
 	GEN_COMMON doorbell_super
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_DOORBELL
 	bl	doorbell_exception
@@ -2200,7 +2177,6 @@ EXC_COMMON_BEGIN(hmi_exception_early_common)
 
 EXC_COMMON_BEGIN(hmi_exception_common)
 	GEN_COMMON hmi_exception
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	handle_hmi_exception
 	b	interrupt_return
@@ -2229,7 +2205,6 @@ EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20)
 EXC_VIRT_END(h_doorbell, 0x4e80, 0x20)
 EXC_COMMON_BEGIN(h_doorbell_common)
 	GEN_COMMON h_doorbell
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_DOORBELL
 	bl	doorbell_exception
@@ -2262,7 +2237,6 @@ EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20)
 EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20)
 EXC_COMMON_BEGIN(h_virt_irq_common)
 	GEN_COMMON h_virt_irq
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_IRQ
 	b	interrupt_return
@@ -2308,7 +2282,6 @@ EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20)
 EXC_VIRT_END(performance_monitor, 0x4f00, 0x20)
 EXC_COMMON_BEGIN(performance_monitor_common)
 	GEN_COMMON performance_monitor
-	FINISH_NAP
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	performance_monitor_exception
 	b	interrupt_return
@@ -3059,24 +3032,6 @@ USE_FIXED_SECTION(virt_trampolines)
 __end_interrupts:
 DEFINE_FIXED_SYMBOL(__end_interrupts)
 
-#ifdef CONFIG_PPC_970_NAP
-	/*
-	 * Called by exception entry code if _TLF_NAPPING was set, this clears
-	 * the NAPPING flag, and redirects the exception exit to
-	 * power4_fixup_nap_return.
-	 */
-	.globl power4_fixup_nap
-EXC_COMMON_BEGIN(power4_fixup_nap)
-	andc	r9,r9,r10
-	std	r9,TI_LOCAL_FLAGS(r11)
-	LOAD_REG_ADDR(r10, power4_idle_nap_return)
-	std	r10,_NIP(r1)
-	blr
-
-power4_idle_nap_return:
-	blr
-#endif
-
 CLOSE_FIXED_SECTION(real_vectors);
 CLOSE_FIXED_SECTION(real_trampolines);
 CLOSE_FIXED_SECTION(virt_vectors);
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 22f249b6f58d..27d2e6a72ec9 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -201,4 +201,8 @@ _GLOBAL(power4_idle_nap)
 	mtmsrd	r7
 	isync
 	b	1b
+
+	.globl power4_idle_nap_return
+power4_idle_nap_return:
+	blr
 #endif
-- 
2.23.0



More information about the Linuxppc-dev mailing list