[PATCH net RFC] ibmvnic: device remove has higher precedence over reset

[Lijun Pan]

On Tue, Jan 19, 2021 at 1:56 PM Uwe Kleine-König
<u.kleine-koenig at pengutronix.de> wrote:
>
> On Tue, Jan 19, 2021 at 01:33:13PM -0600, Lijun Pan wrote:
> > Returning -EBUSY in ibmvnic_remove() does not actually hold the
> > removal procedure since driver core doesn't care for the return
> > value (see __device_release_driver() in drivers/base/dd.c
> > calling dev->bus->remove()) though vio_bus_remove
> > (in arch/powerpc/platforms/pseries/vio.c) records the
> > return value and passes it on. [1]
> >
> > During the device removal precedure, we should not schedule
> > any new reset, and rely on the flush_work and flush_delayed_work
> > to complete the pending resets, and specifically we need to
> > let __ibmvnic_reset() keep running while in REMOVING state since
> > flush_work and flush_delayed_work shall call __ibmvnic_reset finally.
> >
> > [1] https://lore.kernel.org/linuxppc-dev/20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53
> > Reported-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> > Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset")
> > Signed-off-by: Lijun Pan <ljp at linux.ibm.com>
> > ---
> >  drivers/net/ethernet/ibm/ibmvnic.c | 8 +-------
> >  1 file changed, 1 insertion(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
> > index aed985e08e8a..11f28fd03057 100644
> > --- a/drivers/net/ethernet/ibm/ibmvnic.c
> > +++ b/drivers/net/ethernet/ibm/ibmvnic.c
> > @@ -2235,8 +2235,7 @@ static void __ibmvnic_reset(struct work_struct *work)
> >       while (rwi) {
> >               spin_lock_irqsave(&adapter->state_lock, flags);
> >
> > -             if (adapter->state == VNIC_REMOVING ||
> > -                 adapter->state == VNIC_REMOVED) {
> > +             if (adapter->state == VNIC_REMOVED) {
>
> I think you need to keep the check for VNIC_REMOVING. Otherwise you
> don't prevent that a new reset being queued after ibmvnic_remove() set
> the state to VNIC_REMOVING. Am I missing something?

I leave the checking for REMOVING there in ibmvnic_reset, which is the
function to schedule/queue up the resets.
Here I delete the REMOVING in __ibmvnic_reset to let it run and finish.
Otherwise flush_work will not do anything if __ibmvnic_reset() just return
doing nothing.

I can explain it in the commit message.

>
> >                       spin_unlock_irqrestore(&adapter->state_lock, flags);
> >                       kfree(rwi);
> >                       rc = EBUSY;
> > @@ -5372,11 +5371,6 @@ static int ibmvnic_remove(struct vio_dev *dev)
> >       unsigned long flags;
> >
> >       spin_lock_irqsave(&adapter->state_lock, flags);
> > -     if (test_bit(0, &adapter->resetting)) {
> > -             spin_unlock_irqrestore(&adapter->state_lock, flags);
> > -             return -EBUSY;
> > -     }
> > -
> >       adapter->state = VNIC_REMOVING;
> >       spin_unlock_irqrestore(&adapter->state_lock, flags);
>
> Best regards
> Uwe
>
> --
> Pengutronix e.K.                           | Uwe Kleine-König            |
> Industrial Linux Solutions                 | https://www.pengutronix.de/ |