SPI not working on 5.10 and 5.11, bisected to 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")

Mark Brown broonie at kernel.org
Thu Jan 14 22:59:58 AEDT 2021


On Thu, Jan 14, 2021 at 12:27:42PM +0100, Christophe Leroy wrote:

> Today I have in the DTS the CS GPIOs declared as ACTIVE_LOW.

> If I declare them as ACTIVE_HIGH instead, then I also have to set
> spi-cs-high property, otherwise of_gpio_flags_quirks() is not happy and
> forces the GPIO ACTIVE LOW.

> When I set spi-cs-high property, it sets the SPI_CS_HIGH bit in spi->mode.

OK, so it sounds like you want SPI_CS_HIGH and that is being set
correctly?

> In fsl_spi_chipselect(), we have
> 
> 	bool pol = spi->mode & SPI_CS_HIGH
> 
> Then
> 	pdata->cs_control(spi, pol);

> So changing the board config is compensated by the above, and at the end it still doesn't work.

This is a driver bug, the driver set_cs() operation should not be
modifying the value it is told to set.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20210114/c6260f99/attachment.sig>


More information about the Linuxppc-dev mailing list