[PATCH v5 14/21] powerpc/64s: move context tracking exit to interrupt exit path

Nicholas Piggin npiggin at gmail.com
Wed Jan 13 18:32:08 AEDT 2021


The interrupt handler wrapper functions are not the ideal place to
maintain context tracking because after they return, the low level exit
code must then determine if there are interrupts to replay, or if the
task should be preempted, etc. Those paths (e.g., schedule_user) include
their own exception_enter/exit pairs to fix this up but it's a bit hacky
(see schedule_user() comments).

Ideally context tracking will go to user mode only when there are no
more interrupts or context switches or other exit processing work to
handle.

64e can not do this because it does not use the C interrupt exit code.

Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/include/asm/interrupt.h | 34 +++++++++++++++++++++++++---
 arch/powerpc/kernel/syscall_64.c     |  9 ++++++++
 2 files changed, 40 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index bee393c72fe5..34d7cca2cb2e 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -7,16 +7,30 @@
 #include <asm/ftrace.h>
 
 struct interrupt_state {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3E_64
 	enum ctx_state ctx_state;
 #endif
 };
 
 static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
 {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3E_64
 	state->ctx_state = exception_enter();
 #endif
+
+#ifdef CONFIG_PPC_BOOK3S_64
+	if (user_mode(regs)) {
+		CT_WARN_ON(ct_state() != CONTEXT_USER);
+		user_exit_irqoff();
+	} else {
+		/*
+		 * CT_WARN_ON comes here via program_check_exception,
+		 * so avoid recursion.
+		 */
+		if (TRAP(regs) != 0x700)
+			CT_WARN_ON(ct_state() != CONTEXT_KERNEL);
+	}
+#endif
 }
 
 /*
@@ -35,9 +49,23 @@ static inline void interrupt_enter_prepare(struct pt_regs *regs, struct interrup
  */
 static inline void interrupt_exit_prepare(struct pt_regs *regs, struct interrupt_state *state)
 {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3E_64
 	exception_exit(state->ctx_state);
 #endif
+
+	/*
+	 * Book3S exits to user via interrupt_exit_user_prepare(), which does
+	 * context tracking, which is a cleaner way to handle PREEMPT=y
+	 * and avoid context entry/exit in e.g., preempt_schedule_irq()),
+	 * which is likely to be where the core code wants to end up.
+	 *
+	 * The above comment explains why we can't do the
+	 *
+	 *     if (user_mode(regs))
+	 *         user_exit_irqoff();
+	 *
+	 * sequence here.
+	 */
 }
 
 static inline void interrupt_async_enter_prepare(struct pt_regs *regs, struct interrupt_state *state)
diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c
index d7d256a7a41f..42f0ad4b2fbb 100644
--- a/arch/powerpc/kernel/syscall_64.c
+++ b/arch/powerpc/kernel/syscall_64.c
@@ -305,6 +305,7 @@ notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned
 	BUG_ON(!(regs->msr & MSR_PR));
 	BUG_ON(!FULL_REGS(regs));
 	BUG_ON(regs->softe != IRQS_ENABLED);
+	CT_WARN_ON(ct_state() == CONTEXT_USER);
 
 	/*
 	 * We don't need to restore AMR on the way back to userspace for KUAP.
@@ -347,7 +348,9 @@ notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned
 		}
 	}
 
+	user_enter_irqoff();
 	if (unlikely(!prep_irq_for_enabled_exit(true))) {
+		user_exit_irqoff();
 		local_irq_enable();
 		local_irq_disable();
 		goto again;
@@ -392,6 +395,12 @@ notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs, unsign
 		unrecoverable_exception(regs);
 	BUG_ON(regs->msr & MSR_PR);
 	BUG_ON(!FULL_REGS(regs));
+	/*
+	 * CT_WARN_ON comes here via program_check_exception,
+	 * so avoid recursion.
+	 */
+	if (TRAP(regs) != 0x700)
+		CT_WARN_ON(ct_state() == CONTEXT_USER);
 
 	amr = kuap_get_and_check_amr();
 
-- 
2.23.0



More information about the Linuxppc-dev mailing list