[PATCH v5 22/22] powerpc/32: Handle bookE debugging in C in syscall entry/exit
Christophe Leroy
christophe.leroy at csgroup.eu
Tue Feb 9 02:10:42 AEDT 2021
The handling of SPRN_DBCR0 and other registers can easily
be done in C instead of ASM.
Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
v5: New
---
arch/powerpc/include/asm/reg_booke.h | 3 +++
arch/powerpc/kernel/entry_32.S | 7 -------
arch/powerpc/kernel/head_32.h | 15 --------------
arch/powerpc/kernel/head_booke.h | 19 ------------------
arch/powerpc/kernel/interrupt.c | 29 +++++++++++++++++++++++++++-
5 files changed, 31 insertions(+), 42 deletions(-)
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 262782f08fd4..17b8dcd9a40d 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -691,6 +691,9 @@
#define mttmr(rn, v) asm volatile(MTTMR(rn, %0) : \
: "r" ((unsigned long)(v)) \
: "memory")
+
+extern unsigned long global_dbcr0[];
+
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index a574201b0eb6..8dea4d3b1d06 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -342,13 +342,6 @@ transfer_to_syscall:
ret_from_syscall:
addi r4,r1,STACK_FRAME_OVERHEAD
bl syscall_exit_prepare
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
- /* If the process has its own DBCR0 value, load it up. The internal
- debug mode bit tells us that dbcr0 should be loaded. */
- lwz r0,THREAD+THREAD_DBCR0(r2)
- andis. r10,r0,DBCR0_IDM at h
- bnel- load_dbcr0
-#endif
#ifdef CONFIG_PPC_47x
lis r4,icache_44x_need_flush at ha
lwz r5,icache_44x_need_flush at l(r4)
diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h
index 5001c6ecc3ec..961b1ce3b6bf 100644
--- a/arch/powerpc/kernel/head_32.h
+++ b/arch/powerpc/kernel/head_32.h
@@ -153,21 +153,6 @@
SAVE_4GPRS(3, r11)
SAVE_2GPRS(7, r11)
addi r2,r12,-THREAD
-#if defined(CONFIG_40x)
- /* Check to see if the dbcr0 register is set up to debug. Use the
- internal debug mode bit to do this. */
- lwz r12,THREAD_DBCR0(r12)
- andis. r12,r12,DBCR0_IDM at h
- beq+ 3f
- /* From user and task is ptraced - load up global dbcr0 */
- li r12,-1 /* clear all pending debug events */
- mtspr SPRN_DBSR,r12
- lis r11,global_dbcr0 at ha
- addi r11,r11,global_dbcr0 at l
- lwz r12,0(r11)
- mtspr SPRN_DBCR0,r12
-3:
-#endif
b transfer_to_syscall /* jump to handler */
.endm
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 5f565232b99d..47857795f50a 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -130,25 +130,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_EMB_HV)
SAVE_2GPRS(7, r11)
addi r2,r10,-THREAD
- /* Check to see if the dbcr0 register is set up to debug. Use the
- internal debug mode bit to do this. */
- lwz r12,THREAD_DBCR0(r10)
- andis. r12,r12,DBCR0_IDM at h
- beq+ 3f
- /* From user and task is ptraced - load up global dbcr0 */
- li r12,-1 /* clear all pending debug events */
- mtspr SPRN_DBSR,r12
- lis r11,global_dbcr0 at ha
- addi r11,r11,global_dbcr0 at l
-#ifdef CONFIG_SMP
- lwz r10, TASK_CPU(r2)
- slwi r10, r10, 2
- add r11, r11, r10
-#endif
- lwz r12,0(r11)
- mtspr SPRN_DBCR0,r12
-
-3:
b transfer_to_syscall /* jump to handler */
.endm
diff --git a/arch/powerpc/kernel/interrupt.c b/arch/powerpc/kernel/interrupt.c
index c89a8eac3e24..6111acf61373 100644
--- a/arch/powerpc/kernel/interrupt.c
+++ b/arch/powerpc/kernel/interrupt.c
@@ -76,6 +76,13 @@ notrace long system_call_exception(long r3, long r4, long r5,
kuap_check_amr();
#endif
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+ if (IS_ENABLED(CONFIG_PPC32) && unlikely(current->thread.debug.dbcr0 & DBCR0_IDM)) {
+ mtspr(SPRN_DBSR, -1);
+ mtspr(SPRN_DBCR0, global_dbcr0[smp_processor_id()]);
+ }
+#endif
+
account_cpu_user_entry();
account_stolen_time();
@@ -324,6 +331,22 @@ notrace unsigned long syscall_exit_prepare(unsigned long r3,
local_paca->tm_scratch = regs->msr;
#endif
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+ if (unlikely(current->thread.debug.dbcr0 & DBCR0_IDM)) {
+ /*
+ * Check to see if the dbcr0 register is set up to debug.
+ * Use the internal debug mode bit to do this.
+ */
+ mtmsr(mfmsr() & ~MSR_DE);
+ if (IS_ENABLED(CONFIG_PPC32)) {
+ isync();
+ global_dbcr0[smp_processor_id()] = mfspr(SPRN_DBCR0);
+ }
+ mtspr(SPRN_DBCR0, current->thread.debug.dbcr0);
+ mtspr(SPRN_DBSR, -1);
+ }
+#endif
+
account_cpu_user_exit();
#ifdef CONFIG_PPC_BOOK3S_64 /* BOOK3E and ppc32 not using this */
@@ -401,13 +424,17 @@ notrace unsigned long interrupt_exit_user_prepare(struct pt_regs *regs, unsigned
goto again;
}
-#ifdef CONFIG_PPC_BOOK3E
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
if (unlikely(current->thread.debug.dbcr0 & DBCR0_IDM)) {
/*
* Check to see if the dbcr0 register is set up to debug.
* Use the internal debug mode bit to do this.
*/
mtmsr(mfmsr() & ~MSR_DE);
+ if (IS_ENABLED(CONFIG_PPC32)) {
+ isync();
+ global_dbcr0[smp_processor_id()] = mfspr(SPRN_DBCR0);
+ }
mtspr(SPRN_DBCR0, current->thread.debug.dbcr0);
mtspr(SPRN_DBSR, -1);
}
--
2.25.0
More information about the Linuxppc-dev
mailing list