[PATCH] powerpc: fix AKEBONO build failures

[Michael Ellerman]

Randy Dunlap <rdunlap at infradead.org> writes:
> On 1/21/21 5:14 PM, Michael Ellerman wrote:
>> Randy Dunlap <rdunlap at infradead.org> writes:
>>> On 1/20/21 1:29 PM, Yury Norov wrote:
>>>> Hi all,
>>>>
>>>> I found the power pc build broken on today's
>>>> linux-next (647060f3b592).
>>>
>>> Darn, I was building linux-5.11-rc4.
>>>
>>> I'll try linux-next after I send this.
>>>
>>> ---
>>> From: Randy Dunlap <rdunlap at infradead.org>
>>>
>>> Fulfill AKEBONO Kconfig requirements.
>>>
>>> Fixes these Kconfig warnings (and more) and fixes the subsequent
>>> build errors:
>>>
>>> WARNING: unmet direct dependencies detected for NETDEVICES
>>>    Depends on [n]: NET [=n]
>>>    Selected by [y]:
>>>    - AKEBONO [=y] && PPC_47x [=y]
>>>
>>> WARNING: unmet direct dependencies detected for MMC_SDHCI
>>>    Depends on [n]: MMC [=n] && HAS_DMA [=y]
>>>    Selected by [y]:
>>>    - AKEBONO [=y] && PPC_47x [=y]
>>>
>>> Signed-off-by: Randy Dunlap <rdunlap at infradead.org>
>>> Cc: Michael Ellerman <mpe at ellerman.id.au>
>>> Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
>>> Cc: Paul Mackerras <paulus at samba.org>
>>> Cc: linuxppc-dev at lists.ozlabs.org
>>> Cc: Yury Norov <yury.norov at gmail.com>
>>> ---
>>>   arch/powerpc/platforms/44x/Kconfig |    2 ++
>>>   1 file changed, 2 insertions(+)
>>>
>>> --- lnx-511-rc4.orig/arch/powerpc/platforms/44x/Kconfig
>>> +++ lnx-511-rc4/arch/powerpc/platforms/44x/Kconfig
>>> @@ -206,6 +206,7 @@ config AKEBONO
>>>   	select PPC4xx_HSTA_MSI
>>>   	select I2C
>>>   	select I2C_IBM_IIC
>>> +	select NET
>>>   	select NETDEVICES
>>>   	select ETHERNET
>>>   	select NET_VENDOR_IBM
>> 
>> I think the problem here is too much use of select, for things that
>> should instead be in the defconfig.
>> 
>> The patch below results in the same result for make
>> 44x/akebono_defconfig. Does it fix the original issue?
>
> Hi Michael,
> Sorry for the delay.
>
> Changing the akebono_defconfig doesn't cause the missing symbols
> to be set -- the defconfig is not being used here.

Yep, but that's OK. None of those selected symbols are hard dependencies
of AKEBONO, they're just things you probably want in your kernel to
actually boot on an akebono board.

> I guess that if you have users who set CONFIG_AKEBONO and expect
> it to build cleanly, you will need something like my patch or the
> patch that Florian just posted.

It will build cleanly, it just won't necessarily boot on a real board.
Users who enable AKEBONO manually need to know what they're doing, or
they should just use the defconfig.

> Changing the akebono_defconfig also would not help 'make randconfig'
> builds to build cleanly if they had happened to enable AKEBONO.

Changing the defconfig doesn't help randconfig, but dropping the selects
does.

Anyway I'll send a proper version of my patch, which I'm pretty
confident will fix all the issues.

cheers