[PATCH] powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

[Maxim Kiselev]

Yes, I have T1040RDB ver.b (without SFP) and my front panel looks like this.


 +---------------------------------------------------------------------+
 |                    NO SFP                                           |
 |  +-------+-------+   |           +-------+-------+-------+-------+  |
 |  | UART0 |  ETH1 |   |           |  ETH4 |  ETH6 |  ETH8 | ETH10 |  |
 |  +-------+-------+  \|/  +-------+-------+-------+-------+-------+  |
 |  | UART1 |  ETH0 |       |  ETH2 |  ETH3 |  ETH5 |  ETH7 | ETH9  |  |
 +--+-------+-------+-------+-------+-------+-------+-------+-------+--+

Same as this pic
https://habrastorage.org/files/433/d0f/057/433d0f05784f42b6acf9bb777970b1e9.jpg


чт, 30 дек. 2021 г. в 16:00, Vladimir Oltean <vladimir.oltean at nxp.com>:

> On Thu, Dec 30, 2021 at 01:43:28PM +0300, Maxim Kiselev wrote:
> > Fix network interface names for the switch ports according to labels
> > that are written on the front panel of the board. They start from ETH3
> > and end at ETH10.
> >
> > Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville
> > Ethernet switch")
>
> A Fixes: tag should not wrap on multiple lines.
>
> > Signed-off-by: Maxim Kiselev <bigunclemax at gmail.com>
> > Reviewed-by: Maxim Kochetkov <fido_max at inbox.ru>
> > ---
>
> Sadly I'm not able to confirm or disprove this change right now, because
> my T1040RDB has a bad DDR memory stick, it seems, so it just randomly
> hangs.
> But I'm pretty sure the Ethernet ports were properly mapped out when I
> tested them.
>
> Do you have the T1040RDB or the T1040D4RDB? Because the front panel of
> my T1040RDB looks like this:
>
>  +---------------------------------------------------------------------+
>  |                                                                     |
>  |  +-------+-------+               +-------+-------+-------+-------+  |
>  |  | UART0 |  ETH1 |               |  ETH4 |  ETH6 |  ETH8 | ETH10 |  |
>  |  +-------+-------+-------+-------+-------+-------+-------+-------+  |
>  |  | UART1 |  ETH0 |  ETH2 |  ETH3 |  ETH5 |  ETH7 |  ETH9 | ETH11 |  |
>  +--+-------+-------+-------+-------+-------+-------+-------+-------+--+
>
> >  arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> > index af0c8a6f56138..b6733e7e65805 100644
> > --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> > +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> > @@ -119,7 +119,7 @@ &seville_port0 {
> >       managed = "in-band-status";
> >       phy-handle = <&phy_qsgmii_0>;
> >       phy-mode = "qsgmii";
> > -     label = "ETH5";
> > +     label = "ETH3";
> >       status = "okay";
> >  };
> >
> > @@ -135,7 +135,7 @@ &seville_port2 {
> >       managed = "in-band-status";
> >       phy-handle = <&phy_qsgmii_2>;
> >       phy-mode = "qsgmii";
> > -     label = "ETH7";
> > +     label = "ETH5";
> >       status = "okay";
> >  };
> >
> > @@ -151,7 +151,7 @@ &seville_port4 {
> >       managed = "in-band-status";
> >       phy-handle = <&phy_qsgmii_4>;
> >       phy-mode = "qsgmii";
> > -     label = "ETH9";
> > +     label = "ETH7";
> >       status = "okay";
> >  };
> >
> > @@ -167,7 +167,7 @@ &seville_port6 {
> >       managed = "in-band-status";
> >       phy-handle = <&phy_qsgmii_6>;
> >       phy-mode = "qsgmii";
> > -     label = "ETH11";
> > +     label = "ETH9";
> >       status = "okay";
> >  };
> >
> > --
> > 2.32.0
> >
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20211230/eeb683c2/attachment.htm>