[PATCH] PCI/AER: Continue AER recovery of device with NO_BUS_RESET set

[Shanker Donthineni]

In the current implementation, the AER FATAL and NONFTAL recovery will be
terminated for the device that exhibits NO_BUS_RESET quirk. The non-zero
return value from pci_bus_error_reset() is treated as an error condition
in aer_root_reset() which leads to return PCI_ERS_RESULT_DISCONNECT.

  aer_recover_work_func()
    pcie_do_recovery()
      report_frozen_detected()
      if (aer_root_reset() == PCI_ERS_RESULT_DISCONNECT)
         goto failed           # termimates here because of NO_BUS_RESET

      ...
      report_mmio_enabled()
      report_resume()
      pcie_clear_xxx_status()
      ...
      return 0
  failed:
      pci_uevent_ers(PCI_ERS_RESULT_DISCONNECT);

The return value -ENOTTY from pci_bus_error_reset() indicates SBR was
skipped but no real errors were encountered. This scenario could be
considered as a non-error case so that the PCI device driver gets the
opportunity to recover the device back to an operational state instead
of keeping it in the DISCONNECT state.

Signed-off-by: Shanker Donthineni <sdonthineni at nvidia.com>
---
 drivers/pci/pcie/aer.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 9784fdcf30061..8cf6bd6a3376d 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1414,8 +1414,12 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 			pci_info(dev, "not reset (no FLR support: %d)\n", rc);
 	} else {
 		rc = pci_bus_error_reset(dev);
-		pci_info(dev, "%s Port link has been reset (%d)\n",
-			pci_is_root_bus(dev->bus) ? "Root" : "Downstream", rc);
+		pci_info(dev, "%s Port link has %sbeen reset (%d)\n",
+			pci_is_root_bus(dev->bus) ? "Root" : "Downstream",
+			rc == -ENOTTY ? "not " : "", rc);
+
+		if (rc == -ENOTTY)
+			rc = 0;
 	}
 
 	if ((host->native_aer || pcie_ports_native) && aer) {
-- 
2.25.1