[PATCH] macintosh: no need to initilise statics to 0
Jason Wang
wangborong at cdjrlc.com
Tue Aug 17 21:51:04 AEST 2021
Global static variables dont need to be initialised to 0. Because
the compiler will initilise them.
Signed-off-by: Jason Wang <wangborong at cdjrlc.com>
---
drivers/macintosh/mediabay.c | 10 ++---
drivers/macintosh/via-pmu.c | 78 ++++++++++++++++++------------------
2 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index eab7e83c11c4..e104a95decb5 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -70,7 +70,7 @@ struct media_bay_info {
#define MAX_BAYS 2
static struct media_bay_info media_bays[MAX_BAYS];
-static int media_bay_count = 0;
+static int media_bay_count;
/*
* Wait that number of ms between each step in normal polling mode
@@ -129,7 +129,7 @@ enum {
/*
* Functions for polling content of media bay
*/
-
+
static u8
ohare_mb_content(struct media_bay_info *bay)
{
@@ -336,7 +336,7 @@ static inline void set_mb_power(struct media_bay_info* bay, int onoff)
bay->ops->power(bay, 1);
bay->state = mb_powering_up;
pr_debug("mediabay%d: powering up\n", bay->index);
- } else {
+ } else {
/* Make sure everything is powered down & disabled */
bay->ops->power(bay, 0);
bay->state = mb_powering_down;
@@ -577,7 +577,7 @@ static int media_bay_attach(struct macio_dev *mdev,
macio_release_resources(mdev);
return -ENOMEM;
}
-
+
i = media_bay_count++;
bay = &media_bays[i];
bay->mdev = mdev;
@@ -745,7 +745,7 @@ static int __init media_bay_init(void)
if (!machine_is(powermac))
return 0;
- macio_register_driver(&media_bay_driver);
+ macio_register_driver(&media_bay_driver);
return 0;
}
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 4bdd4c45e7a7..cba4c2464dbf 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -158,7 +158,7 @@ static struct device_node *vias;
static struct device_node *gpio_node;
#endif
static unsigned char __iomem *gpio_reg;
-static int gpio_irq = 0;
+static int gpio_irq;
static int gpio_irq_enabled = -1;
static volatile int pmu_suspended;
static spinlock_t pmu_lock;
@@ -313,7 +313,7 @@ int __init find_via_pmu(void)
PMU_INT_SNDBRT |
PMU_INT_ADB |
PMU_INT_TICK;
-
+
if (of_node_name_eq(vias->parent, "ohare") ||
of_device_is_compatible(vias->parent, "ohare"))
pmu_kind = PMU_OHARE_BASED;
@@ -336,7 +336,7 @@ int __init find_via_pmu(void)
PMU_INT_ADB |
PMU_INT_TICK |
PMU_INT_ENVIRONMENT;
-
+
gpiop = of_find_node_by_name(NULL, "gpio");
if (gpiop) {
reg = of_get_property(gpiop, "reg", NULL);
@@ -358,7 +358,7 @@ int __init find_via_pmu(void)
printk(KERN_ERR "via-pmu: Can't map address !\n");
goto fail_via_remap;
}
-
+
out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */
out_8(&via1[IFR], 0x7f); /* clear IFR */
@@ -368,7 +368,7 @@ int __init find_via_pmu(void)
goto fail_init;
sys_ctrler = SYS_CTRLER_PMU;
-
+
return 1;
fail_init:
@@ -623,7 +623,7 @@ init_pmu(void)
pmu_wait_complete(&req);
if (req.reply_len > 0)
pmu_version = req.reply[0];
-
+
/* Read server mode setting */
if (pmu_kind == PMU_KEYLARGO_BASED) {
pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
@@ -664,11 +664,11 @@ static void pmu_set_server_mode(int server_mode)
if (server_mode)
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
PMU_PWR_SET_POWERUP_EVENTS,
- req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
+ req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
else
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
PMU_PWR_CLR_POWERUP_EVENTS,
- req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
+ req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
pmu_wait_complete(&req);
}
@@ -684,8 +684,8 @@ done_battery_state_ohare(struct adb_request* req)
* 0x01 : AC indicator
* 0x02 : charging
* 0x04 : battery exist
- * 0x08 :
- * 0x10 :
+ * 0x08 :
+ * 0x10 :
* 0x20 : full charged
* 0x40 : pcharge reset
* 0x80 : battery exist
@@ -708,7 +708,7 @@ done_battery_state_ohare(struct adb_request* req)
pmu_power_flags |= PMU_PWR_AC_PRESENT;
else
pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
-
+
if (mb == PMAC_TYPE_COMET) {
vmax_charged = 189;
vmax_charging = 213;
@@ -771,26 +771,26 @@ done_battery_state_smart(struct adb_request* req)
/* format:
* [0] : format of this structure (known: 3,4,5)
* [1] : flags
- *
+ *
* format 3 & 4:
- *
+ *
* [2] : charge
* [3] : max charge
* [4] : current
* [5] : voltage
- *
+ *
* format 5:
- *
+ *
* [2][3] : charge
* [4][5] : max charge
* [6][7] : current
* [8][9] : voltage
*/
-
+
unsigned int bat_flags = PMU_BATT_TYPE_SMART;
int amperage;
unsigned int capa, max, voltage;
-
+
if (req->reply[1] & 0x01)
pmu_power_flags |= PMU_PWR_AC_PRESENT;
else
@@ -798,7 +798,7 @@ done_battery_state_smart(struct adb_request* req)
capa = max = amperage = voltage = 0;
-
+
if (req->reply[1] & 0x04) {
bat_flags |= PMU_BATT_PRESENT;
switch(req->reply[0]) {
@@ -897,7 +897,7 @@ static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
static int pmu_battery_proc_show(struct seq_file *m, void *v)
{
long batnum = (long)m->private;
-
+
seq_putc(m, '\n');
seq_printf(m, "flags : %08x\n", pmu_batteries[batnum].flags);
seq_printf(m, "charge : %d\n", pmu_batteries[batnum].charge);
@@ -932,7 +932,7 @@ static ssize_t pmu_options_proc_write(struct file *file,
char tmp[33];
char *label, *val;
size_t fcount = count;
-
+
if (!count)
return -EINVAL;
if (count > 32)
@@ -1304,7 +1304,7 @@ pmu_suspend(void)
if (pmu_state == uninitialized)
return;
-
+
spin_lock_irqsave(&pmu_lock, flags);
pmu_suspended++;
if (pmu_suspended > 1) {
@@ -1430,7 +1430,7 @@ pmu_handle_data(unsigned char *data, int len)
&& data[1] == 0x2c && data[3] == 0xff
&& (data[2] & ~1) == 0xf4))
adb_input(data+1, len-1, 1);
-#endif /* CONFIG_ADB */
+#endif /* CONFIG_ADB */
}
break;
@@ -1554,7 +1554,7 @@ pmu_sr_intr(void)
interrupt_data_len[int_data_last] = data_len;
} else {
req = current_req;
- /*
+ /*
* For PMU sleep and freq change requests, we lock the
* PMU until it's explicitly unlocked. This avoids any
* spurrious event polling getting in
@@ -1589,7 +1589,7 @@ via_pmu_interrupt(int irq, void *arg)
/* This is a bit brutal, we can probably do better */
spin_lock_irqsave(&pmu_lock, flags);
++disable_poll;
-
+
for (;;) {
/* On 68k Macs, VIA interrupts are dispatched individually.
* Unless we are polling, the relevant IRQ flag has already
@@ -1653,7 +1653,7 @@ via_pmu_interrupt(int irq, void *arg)
} else if (current_req)
pmu_start();
}
-no_free_slot:
+no_free_slot:
/* Mark the oldest buffer for flushing */
if (int_data_state[!int_data_last] == int_data_ready) {
int_data_state[!int_data_last] = int_data_flush;
@@ -1670,7 +1670,7 @@ via_pmu_interrupt(int irq, void *arg)
pmu_done(req);
req = NULL;
}
-
+
/* Deal with interrupt datas outside of the lock */
if (int_data >= 0) {
pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data]);
@@ -1776,7 +1776,7 @@ pmu_restart(void)
local_irq_disable();
drop_interrupts = 1;
-
+
if (pmu_kind != PMU_KEYLARGO_BASED) {
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
PMU_INT_TICK );
@@ -1830,7 +1830,7 @@ pmu_present(void)
/*
* Put the powerbook to sleep.
*/
-
+
static u32 save_via[8];
static int __fake_sleep;
@@ -1901,7 +1901,7 @@ static int powerbook_sleep_grackle(void)
pci_read_config_word(grackle, 0x70, &pmcr1);
/* Apparently, MacOS uses NAP mode for Grackle ??? */
- pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP);
+ pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP);
pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
pci_write_config_word(grackle, 0x70, pmcr1);
@@ -1913,7 +1913,7 @@ static int powerbook_sleep_grackle(void)
/* We're awake again, stop grackle PM */
pci_read_config_word(grackle, 0x70, &pmcr1);
- pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP);
+ pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP);
pci_write_config_word(grackle, 0x70, pmcr1);
pci_dev_put(grackle);
@@ -1921,11 +1921,11 @@ static int powerbook_sleep_grackle(void)
/* Make sure the PMU is idle */
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
restore_via_state();
-
+
/* Restore L2 cache */
if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
_set_L2CR(save_l2cr);
-
+
/* Restore userland MMU context */
switch_mmu_context(NULL, current->active_mm, NULL);
@@ -1949,7 +1949,7 @@ powerbook_sleep_Core99(void)
unsigned long save_l2cr;
unsigned long save_l3cr;
struct adb_request req;
-
+
if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
printk(KERN_ERR "Sleep mode not supported on this machine\n");
return -ENOSYS;
@@ -2014,7 +2014,7 @@ powerbook_sleep_Core99(void)
/* Restore L3 cache */
if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
_set_L3CR(save_l3cr);
-
+
/* Restore userland MMU context */
switch_mmu_context(NULL, current->active_mm, NULL);
@@ -2173,7 +2173,7 @@ pmu_open(struct inode *inode, struct file *file)
return 0;
}
-static ssize_t
+static ssize_t
pmu_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
@@ -2219,7 +2219,7 @@ pmu_read(struct file *file, char __user *buf,
__set_current_state(TASK_RUNNING);
remove_wait_queue(&pp->wait, &wait);
spin_unlock_irqrestore(&pp->lock, flags);
-
+
return ret;
}
@@ -2236,7 +2236,7 @@ pmu_fpoll(struct file *filp, poll_table *wait)
struct pmu_private *pp = filp->private_data;
__poll_t mask = 0;
unsigned long flags;
-
+
if (!pp)
return 0;
poll_wait(filp, &pp->wait, wait);
@@ -2500,7 +2500,7 @@ device_initcall(pmu_device_init);
#ifdef DEBUG_SLEEP
-static inline void
+static inline void
polled_handshake(void)
{
via2[B] &= ~TREQ; eieio();
@@ -2511,7 +2511,7 @@ polled_handshake(void)
;
}
-static inline void
+static inline void
polled_send_byte(int x)
{
via1[ACR] |= SR_OUT | SR_EXT; eieio();
--
2.32.0
More information about the Linuxppc-dev
mailing list