[PATCH v6 10/11] powerpc/pseries/iommu: Make use of DDW for indirect mapping
Leonardo Bras
leobras.c at gmail.com
Tue Aug 17 16:39:28 AEST 2021
So far it's assumed possible to map the guest RAM 1:1 to the bus, which
works with a small number of devices. SRIOV changes it as the user can
configure hundreds VFs and since phyp preallocates TCEs and does not
allow IOMMU pages bigger than 64K, it has to limit the number of TCEs
per a PE to limit waste of physical pages.
As of today, if the assumed direct mapping is not possible, DDW creation
is skipped and the default DMA window "ibm,dma-window" is used instead.
By using DDW, indirect mapping can get more TCEs than available for the
default DMA window, and also get access to using much larger pagesizes
(16MB as implemented in qemu vs 4k from default DMA window), causing a
significant increase on the maximum amount of memory that can be IOMMU
mapped at the same time.
Indirect mapping will only be used if direct mapping is not a
possibility.
For indirect mapping, it's necessary to re-create the iommu_table with
the new DMA window parameters, so iommu_alloc() can use it.
Removing the default DMA window for using DDW with indirect mapping
is only allowed if there is no current IOMMU memory allocated in
the iommu_table. enable_ddw() is aborted otherwise.
Even though there won't be both direct and indirect mappings at the
same time, we can't reuse the DIRECT64_PROPNAME property name, or else
an older kexec()ed kernel can assume direct mapping, and skip
iommu_alloc(), causing undesirable behavior.
So a new property name DMA64_PROPNAME "linux,dma64-ddr-window-info"
was created to represent a DDW that does not allow direct mapping.
Signed-off-by: Leonardo Bras <leobras.c at gmail.com>
---
arch/powerpc/platforms/pseries/iommu.c | 89 +++++++++++++++++++++-----
1 file changed, 74 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index e11c00b2dc1e..0eccc29f5573 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -375,6 +375,7 @@ static DEFINE_SPINLOCK(direct_window_list_lock);
/* protects initializing window twice for same device */
static DEFINE_MUTEX(direct_window_init_mutex);
#define DIRECT64_PROPNAME "linux,direct64-ddr-window-info"
+#define DMA64_PROPNAME "linux,dma64-ddr-window-info"
static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn,
unsigned long num_pfn, const void *arg)
@@ -940,6 +941,7 @@ static int find_existing_ddw_windows(void)
return 0;
find_existing_ddw_windows_named(DIRECT64_PROPNAME);
+ find_existing_ddw_windows_named(DMA64_PROPNAME);
return 0;
}
@@ -1226,14 +1228,17 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
struct ddw_create_response create;
int page_shift;
u64 win_addr;
+ const char *win_name;
struct device_node *dn;
u32 ddw_avail[DDW_APPLICABLE_SIZE];
struct direct_window *window;
struct property *win64;
bool ddw_enabled = false;
struct failed_ddw_pdn *fpdn;
- bool default_win_removed = false;
+ bool default_win_removed = false, direct_mapping = false;
bool pmem_present;
+ struct pci_dn *pci = PCI_DN(pdn);
+ struct iommu_table *tbl = pci->table_group->tables[0];
dn = of_find_node_by_type(NULL, "ibm,pmemory");
pmem_present = dn != NULL;
@@ -1242,6 +1247,7 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
mutex_lock(&direct_window_init_mutex);
if (find_existing_ddw(pdn, &dev->dev.archdata.dma_offset, &len)) {
+ direct_mapping = (len >= max_ram_len);
ddw_enabled = true;
goto out_unlock;
}
@@ -1322,8 +1328,8 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
query.page_size);
goto out_failed;
}
- /* verify the window * number of ptes will map the partition */
- /* check largest block * page size > max memory hotplug addr */
+
+
/*
* The "ibm,pmemory" can appear anywhere in the address space.
* Assuming it is still backed by page structs, try MAX_PHYSMEM_BITS
@@ -1339,13 +1345,25 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
dev_info(&dev->dev, "Skipping ibm,pmemory");
}
+ /* check if the available block * number of ptes will map everything */
if (query.largest_available_block < (1ULL << (len - page_shift))) {
dev_dbg(&dev->dev,
"can't map partition max 0x%llx with %llu %llu-sized pages\n",
1ULL << len,
query.largest_available_block,
1ULL << page_shift);
- goto out_failed;
+
+ /* DDW + IOMMU on single window may fail if there is any allocation */
+ if (default_win_removed && iommu_table_in_use(tbl)) {
+ dev_dbg(&dev->dev, "current IOMMU table in use, can't be replaced.\n");
+ goto out_failed;
+ }
+
+ len = order_base_2(query.largest_available_block << page_shift);
+ win_name = DMA64_PROPNAME;
+ } else {
+ direct_mapping = true;
+ win_name = DIRECT64_PROPNAME;
}
ret = create_ddw(dev, ddw_avail, &create, page_shift, len);
@@ -1356,8 +1374,8 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
create.liobn, dn);
win_addr = ((u64)create.addr_hi << 32) | create.addr_lo;
- win64 = ddw_property_create(DIRECT64_PROPNAME, create.liobn, win_addr,
- page_shift, len);
+ win64 = ddw_property_create(win_name, create.liobn, win_addr, page_shift, len);
+
if (!win64) {
dev_info(&dev->dev,
"couldn't allocate property, property name, or value\n");
@@ -1375,15 +1393,54 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
if (!window)
goto out_del_prop;
- ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT,
- win64->value, tce_setrange_multi_pSeriesLP_walk);
- if (ret) {
- dev_info(&dev->dev, "failed to map direct window for %pOF: %d\n",
- dn, ret);
+ if (direct_mapping) {
+ /* DDW maps the whole partition, so enable direct DMA mapping */
+ ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT,
+ win64->value, tce_setrange_multi_pSeriesLP_walk);
+ if (ret) {
+ dev_info(&dev->dev, "failed to map direct window for %pOF: %d\n",
+ dn, ret);
/* Make sure to clean DDW if any TCE was set*/
clean_dma_window(pdn, win64->value);
- goto out_del_list;
+ goto out_del_list;
+ }
+ } else {
+ struct iommu_table *newtbl;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pci->phb->mem_resources); i++) {
+ const unsigned long mask = IORESOURCE_MEM_64 | IORESOURCE_MEM;
+
+ /* Look for MMIO32 */
+ if ((pci->phb->mem_resources[i].flags & mask) == IORESOURCE_MEM)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(pci->phb->mem_resources))
+ goto out_del_list;
+
+ /* New table for using DDW instead of the default DMA window */
+ newtbl = iommu_pseries_alloc_table(pci->phb->node);
+ if (!newtbl) {
+ dev_dbg(&dev->dev, "couldn't create new IOMMU table\n");
+ goto out_del_list;
+ }
+
+ iommu_table_setparms_common(newtbl, pci->phb->bus->number, create.liobn, win_addr,
+ 1UL << len, page_shift, NULL, &iommu_table_lpar_multi_ops);
+ iommu_init_table(newtbl, pci->phb->node, pci->phb->mem_resources[i].start,
+ pci->phb->mem_resources[i].end);
+
+ pci->table_group->tables[1] = newtbl;
+
+ /* Keep default DMA window stuct if removed */
+ if (default_win_removed) {
+ tbl->it_size = 0;
+ kfree(tbl->it_map);
+ }
+
+ set_iommu_table_base(&dev->dev, newtbl);
}
spin_lock(&direct_window_list_lock);
@@ -1427,10 +1484,10 @@ static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn)
* as RAM, then we failed to create a window to cover persistent
* memory and need to set the DMA limit.
*/
- if (pmem_present && ddw_enabled && (len == max_ram_len))
+ if (pmem_present && ddw_enabled && direct_mapping && len == max_ram_len)
dev->dev.bus_dma_limit = dev->dev.archdata.dma_offset + (1ULL << len);
- return ddw_enabled;
+ return ddw_enabled && direct_mapping;
}
static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
@@ -1572,7 +1629,9 @@ static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long acti
* we have to remove the property when releasing
* the device node.
*/
- remove_ddw(np, false, DIRECT64_PROPNAME);
+ if (remove_ddw(np, false, DIRECT64_PROPNAME))
+ remove_ddw(np, false, DMA64_PROPNAME);
+
if (pci && pci->table_group)
iommu_pseries_free_group(pci->table_group,
np->full_name);
--
2.32.0
More information about the Linuxppc-dev
mailing list