[PATCH] cpuidle/pseries: Fixup CEDE0 latency only for POWER10 onwards

[Vaidyanathan Srinivasan]

* Gautham R Shenoy <ego at linux.vnet.ibm.com> [2021-04-22 20:37:29]:

> From: "Gautham R. Shenoy" <ego at linux.vnet.ibm.com>
> 
> Commit d947fb4c965c ("cpuidle: pseries: Fixup exit latency for
> CEDE(0)") sets the exit latency of CEDE(0) based on the latency values
> of the Extended CEDE states advertised by the platform
> 
> On some of the POWER9 LPARs, the older firmwares advertise a very low
> value of 2us for CEDE1 exit latency on a Dedicated LPAR. However the
> measured value is 5us on an average. Due to the low advertised exit
> latency, we are entering CEDE(0) more aggressively on such
> platforms. While this helps achieve SMT folding faster, we pay the
> penalty of having to send an IPI to wakeup the CPU when the target
> residency is very short. This is showing up as a performance
> regression on the newer kernels running on the LPARs with older
> firmware.
> 
> Hence, set the exit latency of CEDE(0) based on the latency values
> advertized by platform only from POWER10 onwards. The values
> advertized on POWER10 platforms is more realistic and informed by the
> latency measurements.
> 
> For platforms older than POWER10, retain the hardcoded value of exit
> latency, which is 10us. Though this is higher than the measured
> values, we would be erring on the side of caution.
> 
> Reported-by: Enrico Joedecke <joedecke at de.ibm.com>
> Fixes: commit d947fb4c965c ("cpuidle: pseries: Fixup exit latency for
> CEDE(0)")
> Signed-off-by: Gautham R. Shenoy <ego at linux.vnet.ibm.com>

Reviewed-by: Vaidyanathan Srinivasan <svaidy at linux.ibm.com>

> ---
>  drivers/cpuidle/cpuidle-pseries.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/cpuidle/cpuidle-pseries.c b/drivers/cpuidle/cpuidle-pseries.c
> index a2b5c6f..7207467 100644
> --- a/drivers/cpuidle/cpuidle-pseries.c
> +++ b/drivers/cpuidle/cpuidle-pseries.c
> @@ -419,7 +419,8 @@ static int pseries_idle_probe(void)
>  			cpuidle_state_table = shared_states;
>  			max_idle_state = ARRAY_SIZE(shared_states);
>  		} else {
> -			fixup_cede0_latency();
> +			if (pvr_version_is(PVR_POWER10))
> +				fixup_cede0_latency();
>  			cpuidle_state_table = dedicated_states;
>  			max_idle_state = NR_DEDICATED_STATES;
>  		}

Thanks for the fix.  We should have such safeguards or fallbacks while
running on older platforms.  This fix is needed because of the
unfortunate regression on some older platforms that we failed to
notice while designing and testing the original feature.

--Vaidy