[PATCH 1/5] Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr1-alt-addr' property
Ran Wang
ran.wang_1 at nxp.com
Tue Sep 22 12:12:59 AEST 2020
Hi Leo, Rob,
On Tuesday, September 22, 2020 6:20 AM, Leo Li wrote:
>
> > -----Original Message-----
> > From: Ran Wang <ran.wang_1 at nxp.com>
> > Sent: Wednesday, September 16, 2020 3:18 AM
> > To: Leo Li <leoyang.li at nxp.com>; Rob Herring <robh+dt at kernel.org>;
> > Shawn Guo <shawnguo at kernel.org>
> > Cc: linuxppc-dev at lists.ozlabs.org;
> > linux-arm-kernel at lists.infradead.org;
> > devicetree at vger.kernel.org; linux-kernel at vger.kernel.org; Biwen Li
> > <biwen.li at nxp.com>; Ran Wang <ran.wang_1 at nxp.com>
> > Subject: [PATCH 1/5] Documentation: dt: binding: fsl: Add
> > 'fsl,ippdexpcr1-alt- addr' property
> >
> > From: Biwen Li <biwen.li at nxp.com>
> >
> > The 'fsl,ippdexpcr1-alt-addr' property is used to handle an errata
> > A-008646 on LS1021A
>
> It looks like the previous version of this patch has gotten the reviewed-by from
> Rob. It would be good to be added to the patch for new submission.
Actually this patch has one update from previous version (https://lore.kernel.org/patchwork/patch/1161631/):
Reduce entry number from 3 to 2.
So I'd like to have a review for this one, sorry for not highlight this in advance.
Regards,
Ran
> >
> > Signed-off-by: Biwen Li <biwen.li at nxp.com>
> > Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
> > ---
> > Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 19
> > +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > index 5a33619..1be58a3 100644
> > --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > @@ -34,6 +34,11 @@ Chassis Version Example Chips
> > Optional properties:
> > - little-endian : RCPM register block is Little Endian. Without it RCPM
> > will be Big Endian (default case).
> > + - fsl,ippdexpcr1-alt-addr : The property is related to a hardware issue
> > + on SoC LS1021A and only needed on SoC LS1021A.
> > + Must include 2 entries:
> > + The first entry must be a link to the SCFG device node.
> > + The 2nd entry must be offset of register IPPDEXPCR1 in SCFG.
> >
> > Example:
> > The RCPM node for T4240:
> > @@ -43,6 +48,20 @@ The RCPM node for T4240:
> > #fsl,rcpm-wakeup-cells = <2>;
> > };
> >
> > +The RCPM node for LS1021A:
> > + rcpm: rcpm at 1ee2140 {
> > + compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
> > + reg = <0x0 0x1ee2140 0x0 0x8>;
> > + #fsl,rcpm-wakeup-cells = <2>;
> > +
> > + /*
> > + * The second and third entry compose an alt offset
> > + * address for IPPDEXPCR1(SCFG_SPARECR8)
> > + */
> > + fsl,ippdexpcr1-alt-addr = <&scfg 0x51c>;
> > + };
> > +
> > +
> > * Freescale RCPM Wakeup Source Device Tree Bindings
> > -------------------------------------------
> > Required fsl,rcpm-wakeup property should be added to a device node if
> > the device
> > --
> > 2.7.4
More information about the Linuxppc-dev
mailing list