[patch RFC 07/15] microblaze/mm/highmem: Switch to generic kmap atomic
Thomas Gleixner
tglx at linutronix.de
Sat Sep 19 19:17:58 AEST 2020
Signed-off-by: Thomas Gleixner <tglx at linutronix.de>
Cc: Michal Simek <monstr at monstr.eu>
---
Note: Completely untested
---
arch/microblaze/Kconfig | 1
arch/microblaze/include/asm/highmem.h | 6 ++
arch/microblaze/mm/Makefile | 1
arch/microblaze/mm/highmem.c | 78 ----------------------------------
arch/microblaze/mm/init.c | 6 --
5 files changed, 6 insertions(+), 86 deletions(-)
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -170,6 +170,7 @@ config XILINX_UNCACHED_SHADOW
config HIGHMEM
bool "High memory support"
depends on MMU
+ select KMAP_ATOMIC_GENERIC
help
The address space of Microblaze processors is only 4 Gigabytes large
and it has to accommodate user address space, kernel address
--- a/arch/microblaze/include/asm/highmem.h
+++ b/arch/microblaze/include/asm/highmem.h
@@ -25,7 +25,6 @@
#include <linux/uaccess.h>
#include <asm/fixmap.h>
-extern pte_t *kmap_pte;
extern pte_t *pkmap_page_table;
/*
@@ -52,6 +51,11 @@ extern pte_t *pkmap_page_table;
#define flush_cache_kmaps() { flush_icache(); flush_dcache(); }
+#define arch_kmap_temp_post_map(vaddr, pteval) \
+ local_flush_tlb_page(NULL, vaddr);
+#define arch_kmap_temp_post_unmap(vaddr) \
+ local_flush_tlb_page(NULL, vaddr);
+
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
--- a/arch/microblaze/mm/Makefile
+++ b/arch/microblaze/mm/Makefile
@@ -6,4 +6,3 @@
obj-y := consistent.o init.o
obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
-obj-$(CONFIG_HIGHMEM) += highmem.o
--- a/arch/microblaze/mm/highmem.c
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * highmem.c: virtual kernel memory mappings for high memory
- *
- * PowerPC version, stolen from the i386 version.
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- * Gerhard.Wichert at pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo at redhat.com>
- *
- * Reworked for PowerPC by various contributors. Moved from
- * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
- */
-
-#include <linux/export.h>
-#include <linux/highmem.h>
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-#include <asm/tlbflush.h>
-
-void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
-{
-
- unsigned long vaddr;
- int idx, type;
-
- type = kmap_atomic_idx_push();
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
- set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
- local_flush_tlb_page(NULL, vaddr);
-
- return (void *) vaddr;
-}
-EXPORT_SYMBOL(kmap_atomic_high_prot);
-
-void kunmap_atomic_high(void *kvaddr)
-{
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
- int type;
- unsigned int idx;
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END))
- return;
-
- type = kmap_atomic_idx();
-
- idx = type + KM_TYPE_NR * smp_processor_id();
-#ifdef CONFIG_DEBUG_HIGHMEM
- BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-#endif
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
-
- kmap_atomic_idx_pop();
-}
-EXPORT_SYMBOL(kunmap_atomic_high);
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -49,17 +49,11 @@ unsigned long lowmem_size;
EXPORT_SYMBOL(min_low_pfn);
EXPORT_SYMBOL(max_low_pfn);
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-EXPORT_SYMBOL(kmap_pte);
-
static void __init highmem_init(void)
{
pr_debug("%x\n", (u32)PKMAP_BASE);
map_page(PKMAP_BASE, 0, 0); /* XXX gross */
pkmap_page_table = virt_to_kpte(PKMAP_BASE);
-
- kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
}
static void highmem_setup(void)
More information about the Linuxppc-dev
mailing list