[PATCH] spi: fsl-espi: Only process interrupts for expected events

[Chris Packham]

The SPIE register contains counts for the TX FIFO so any time the irq
handler was invoked we would attempt to process the RX/TX fifos. Use the
SPIM value to mask the events so that we only process interrupts that
were expected.

This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64:
Implement soft interrupt replay in C").

Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
Cc: stable at vger.kernel.org
---

Notes:
    I've tested this on a T2080RDB and a custom board using the T2081 SoC. With
    this change I don't see any spurious instances of the "Transfer done but
    SPIE_DON isn't set!" or "Transfer done but rx/tx fifo's aren't empty!" messages
    and the updates to spi flash are successful.
    
    I think this should go into the stable trees that contain 3282a3da25bd but I
    haven't added a Fixes: tag because I think 3282a3da25bd exposed the issue as
    opposed to causing it.

 drivers/spi/spi-fsl-espi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 7e7c92cafdbb..cb120b68c0e2 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -574,13 +574,14 @@ static void fsl_espi_cpu_irq(struct fsl_espi *espi, u32 events)
 static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
 {
 	struct fsl_espi *espi = context_data;
-	u32 events;
+	u32 events, mask;
 
 	spin_lock(&espi->lock);
 
 	/* Get interrupt events(tx/rx) */
 	events = fsl_espi_read_reg(espi, ESPI_SPIE);
-	if (!events) {
+	mask = fsl_espi_read_reg(espi, ESPI_SPIM);
+	if (!(events & mask)) {
 		spin_unlock(&espi->lock);
 		return IRQ_NONE;
 	}
-- 
2.28.0