[PATCH v1 01/10] powerpc/pseries/iommu: Replace hard-coded page shift

[Leonardo Bras]

On Mon, 2020-08-31 at 13:48 +1000, Alexey Kardashevskiy wrote:
> > > > Well, I created this TCE_RPN_BITS = 52 because the previous mask was a
> > > > hardcoded 40-bit mask (0xfffffffffful), for hard-coded 12-bit (4k)
> > > > pagesize, and on PAPR+/LoPAR also defines TCE as having bits 0-51
> > > > described as RPN, as described before.
> > > > 
> > > > IODA3 Revision 3.0_prd1 (OpenPowerFoundation), Figure 3.4 and 3.5.
> > > > shows system memory mapping into a TCE, and the TCE also has bits 0-51
> > > > for the RPN (52 bits). "Table 3.6. TCE Definition" also shows it.
> > > > In fact, by the looks of those figures, the RPN_MASK should always be a
> > > > 52-bit mask, and RPN = (page >> tceshift) & RPN_MASK.
> > > 
> > > I suspect the mask is there in the first place for extra protection
> > > against too big addresses going to the TCE table (or/and for virtial vs
> > > physical addresses). Using 52bit mask makes no sense for anything, you
> > > could just drop the mask and let c compiler deal with 64bit "uint" as it
> > > is basically a 4K page address anywhere in the 64bit space. Thanks,
> > 
> > Assuming 4K pages you need 52 RPN bits to cover the whole 64bit
> > physical address space. The IODA3 spec does explicitly say the upper
> > bits are optional and the implementation only needs to support enough
> > to cover up to the physical address limit, which is 56bits of P9 /
> > PHB4. If you want to validate that the address will fit inside of
> > MAX_PHYSMEM_BITS then fine, but I think that should be done as a
> > WARN_ON or similar rather than just silently masking off the bits.
> 
> We can do this and probably should anyway but I am also pretty sure we
> can just ditch the mask and have the hypervisor return an error which
> will show up in dmesg.

Ok then, ditching the mask.
Thanks!