[patch V2 11/18] powerpc/mm/highmem: Switch to generic kmap atomic

Thomas Gleixner tglx at linutronix.de
Fri Oct 30 09:18:17 AEDT 2020


No reason having the same code in every architecture

Signed-off-by: Thomas Gleixner <tglx at linutronix.de>
Cc: Michael Ellerman <mpe at ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Cc: Paul Mackerras <paulus at samba.org>
Cc: linuxppc-dev at lists.ozlabs.org
---
 arch/powerpc/Kconfig               |    1 
 arch/powerpc/include/asm/highmem.h |    6 ++-
 arch/powerpc/mm/Makefile           |    1 
 arch/powerpc/mm/highmem.c          |   67 -------------------------------------
 arch/powerpc/mm/mem.c              |    7 ---
 5 files changed, 6 insertions(+), 76 deletions(-)

--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -409,6 +409,7 @@ menu "Kernel options"
 config HIGHMEM
 	bool "High memory support"
 	depends on PPC32
+        select KMAP_LOCAL
 
 source "kernel/Kconfig.hz"
 
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -29,7 +29,6 @@
 #include <asm/page.h>
 #include <asm/fixmap.h>
 
-extern pte_t *kmap_pte;
 extern pte_t *pkmap_page_table;
 
 /*
@@ -60,6 +59,11 @@ extern pte_t *pkmap_page_table;
 
 #define flush_cache_kmaps()	flush_cache_all()
 
+#define arch_kmap_local_post_map(vaddr, pteval)	\
+	local_flush_tlb_page(NULL, vaddr)
+#define arch_kmap_local_post_unmap(vaddr)	\
+	local_flush_tlb_page(NULL, vaddr)
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += num
 obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
-obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_PPC_COPRO_BASE)	+= copro_fault.o
 obj-$(CONFIG_PPC_PTDUMP)	+= ptdump/
 obj-$(CONFIG_KASAN)		+= kasan/
--- a/arch/powerpc/mm/highmem.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * highmem.c: virtual kernel memory mappings for high memory
- *
- * PowerPC version, stolen from the i386 version.
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- *		      Gerhard.Wichert at pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mingo at redhat.com>
- *
- * Reworked for PowerPC by various contributors. Moved from
- * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
- */
-
-#include <linux/highmem.h>
-#include <linux/module.h>
-
-void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
-{
-	unsigned long vaddr;
-	int idx, type;
-
-	type = kmap_atomic_idx_push();
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	WARN_ON(IS_ENABLED(CONFIG_DEBUG_HIGHMEM) && !pte_none(*(kmap_pte - idx)));
-	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
-	local_flush_tlb_page(NULL, vaddr);
-
-	return (void*) vaddr;
-}
-EXPORT_SYMBOL(kmap_atomic_high_prot);
-
-void kunmap_atomic_high(void *kvaddr)
-{
-	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-
-	if (vaddr < __fix_to_virt(FIX_KMAP_END))
-		return;
-
-	if (IS_ENABLED(CONFIG_DEBUG_HIGHMEM)) {
-		int type = kmap_atomic_idx();
-		unsigned int idx;
-
-		idx = type + KM_TYPE_NR * smp_processor_id();
-		WARN_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
-		/*
-		 * force other mappings to Oops if they'll try to access
-		 * this pte without first remap it
-		 */
-		pte_clear(&init_mm, vaddr, kmap_pte-idx);
-		local_flush_tlb_page(NULL, vaddr);
-	}
-
-	kmap_atomic_idx_pop();
-}
-EXPORT_SYMBOL(kunmap_atomic_high);
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -61,11 +61,6 @@
 unsigned long long memory_limit;
 bool init_mem_is_free;
 
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-EXPORT_SYMBOL(kmap_pte);
-#endif
-
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 			      unsigned long size, pgprot_t vma_prot)
 {
@@ -235,8 +230,6 @@ void __init paging_init(void)
 
 	map_kernel_page(PKMAP_BASE, 0, __pgprot(0));	/* XXX gross */
 	pkmap_page_table = virt_to_kpte(PKMAP_BASE);
-
-	kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
 #endif /* CONFIG_HIGHMEM */
 
 	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n",



More information about the Linuxppc-dev mailing list