[PATCH 19/33] docs: ABI: stable: make files ReST compatible
Mauro Carvalho Chehab
mchehab+huawei at kernel.org
Thu Oct 29 01:23:17 AEDT 2020
From: Mauro Carvalho Chehab <mchehab+samsung at kernel.org>
Several entries at the stable ABI files won't parse if we pass
them directly to the ReST output.
Adjust them, in order to allow adding their contents as-is at
the stable ABI book.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung at kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei at kernel.org>
---
Documentation/ABI/stable/firewire-cdev | 4 +
Documentation/ABI/stable/sysfs-acpi-pmprofile | 22 +++--
Documentation/ABI/stable/sysfs-bus-firewire | 3 +
Documentation/ABI/stable/sysfs-bus-nvmem | 19 ++--
Documentation/ABI/stable/sysfs-bus-usb | 6 +-
.../ABI/stable/sysfs-class-backlight | 1 +
.../ABI/stable/sysfs-class-infiniband | 93 +++++++++++++------
Documentation/ABI/stable/sysfs-class-rfkill | 13 ++-
Documentation/ABI/stable/sysfs-class-tpm | 90 +++++++++---------
Documentation/ABI/stable/sysfs-devices | 5 +-
Documentation/ABI/stable/sysfs-driver-ib_srp | 1 +
.../ABI/stable/sysfs-firmware-efi-vars | 4 +
.../ABI/stable/sysfs-firmware-opal-dump | 5 +
.../ABI/stable/sysfs-firmware-opal-elog | 2 +
Documentation/ABI/stable/sysfs-hypervisor-xen | 3 +
Documentation/ABI/stable/vdso | 5 +-
16 files changed, 176 insertions(+), 100 deletions(-)
diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev
index f72ed653878a..c9e8ff026154 100644
--- a/Documentation/ABI/stable/firewire-cdev
+++ b/Documentation/ABI/stable/firewire-cdev
@@ -14,12 +14,14 @@ Description:
Each /dev/fw* is associated with one IEEE 1394 node, which can
be remote or local nodes. Operations on a /dev/fw* file have
different scope:
+
- The 1394 node which is associated with the file:
- Asynchronous request transmission
- Get the Configuration ROM
- Query node ID
- Query maximum speed of the path between this node
and local node
+
- The 1394 bus (i.e. "card") to which the node is attached to:
- Isochronous stream transmission and reception
- Asynchronous stream transmission and reception
@@ -31,6 +33,7 @@ Description:
manager
- Query cycle time
- Bus reset initiation, bus reset event reception
+
- All 1394 buses:
- Allocation of IEEE 1212 address ranges on the local
link layers, reception of inbound requests to such
@@ -43,6 +46,7 @@ Description:
userland implement different access permission models, some
operations are restricted to /dev/fw* files that are associated
with a local node:
+
- Addition of descriptors or directories to the local
nodes' Configuration ROM
- PHY packet transmission and reception
diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile
index 964c7a8afb26..fd97d22b677f 100644
--- a/Documentation/ABI/stable/sysfs-acpi-pmprofile
+++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -6,17 +6,21 @@ Description: The ACPI pm_profile sysfs interface exports the platform
power management (and performance) requirement expectations
as provided by BIOS. The integer value is directly passed as
retrieved from the FADT ACPI table.
-Values: For possible values see ACPI specification:
+
+Values: For possible values see ACPI specification:
5.2.9 Fixed ACPI Description Table (FADT)
Field: Preferred_PM_Profile
Currently these values are defined by spec:
- 0 Unspecified
- 1 Desktop
- 2 Mobile
- 3 Workstation
- 4 Enterprise Server
- 5 SOHO Server
- 6 Appliance PC
- 7 Performance Server
+
+ == =================
+ 0 Unspecified
+ 1 Desktop
+ 2 Mobile
+ 3 Workstation
+ 4 Enterprise Server
+ 5 SOHO Server
+ 6 Appliance PC
+ 7 Performance Server
>7 Reserved
+ == =================
diff --git a/Documentation/ABI/stable/sysfs-bus-firewire b/Documentation/ABI/stable/sysfs-bus-firewire
index 41e5a0cd1e3e..9ac9eddb82ef 100644
--- a/Documentation/ABI/stable/sysfs-bus-firewire
+++ b/Documentation/ABI/stable/sysfs-bus-firewire
@@ -47,6 +47,7 @@ Description:
IEEE 1394 node device attribute.
Read-only and immutable.
Values: 1: The sysfs entry represents a local node (a controller card).
+
0: The sysfs entry represents a remote node.
@@ -125,7 +126,9 @@ Description:
Read-only attribute, immutable during the target's lifetime.
Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
Colon-separated hexadecimal string representations of
+
u64 EUI-64 : u24 directory_ID : u16 LUN
+
without 0x prefixes, without whitespace. The former sbp2 driver
(removed in 2.6.37 after being superseded by firewire-sbp2) used
a somewhat shorter format which was not as close to SAM.
diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem
index 9ffba8576f7b..c399323f37de 100644
--- a/Documentation/ABI/stable/sysfs-bus-nvmem
+++ b/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -9,13 +9,14 @@ Description:
Note: This file is only present if CONFIG_NVMEM_SYSFS
is enabled
- ex:
- hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+ ex::
- 0000000 0000 0000 0000 0000 0000 0000 0000 0000
- *
- 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
- 0000000 0000 0000 0000 0000 0000 0000 0000 0000
- ...
- *
- 0001000
+ hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ *
+ 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ ...
+ *
+ 0001000
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
index b832eeff9999..cad4bc232520 100644
--- a/Documentation/ABI/stable/sysfs-bus-usb
+++ b/Documentation/ABI/stable/sysfs-bus-usb
@@ -50,8 +50,10 @@ Description:
Tools can use this file and the connected_duration file to
compute the percentage of time that a device has been active.
- For example,
- echo $((100 * `cat active_duration` / `cat connected_duration`))
+ For example::
+
+ echo $((100 * `cat active_duration` / `cat connected_duration`))
+
will give an integer percentage. Note that this does not
account for counter wrap.
Users:
diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight
index 70302f370e7e..023fb52645f8 100644
--- a/Documentation/ABI/stable/sysfs-class-backlight
+++ b/Documentation/ABI/stable/sysfs-class-backlight
@@ -4,6 +4,7 @@ KernelVersion: 2.6.12
Contact: Richard Purdie <rpurdie at rpsys.net>
Description:
Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+
- FB_BLANK_UNBLANK (0) : power on.
- FB_BLANK_POWERDOWN (4) : power off
Users: HAL
diff --git a/Documentation/ABI/stable/sysfs-class-infiniband b/Documentation/ABI/stable/sysfs-class-infiniband
index 87b11f91b425..348c4ac803ad 100644
--- a/Documentation/ABI/stable/sysfs-class-infiniband
+++ b/Documentation/ABI/stable/sysfs-class-infiniband
@@ -8,12 +8,14 @@ Date: Apr, 2005
KernelVersion: v2.6.12
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ===========================================
node_type: (RO) Node type (CA, RNIC, usNIC, usNIC UDP,
switch or router)
node_guid: (RO) Node GUID
sys_image_guid: (RO) System image GUID
+ =============== ===========================================
What: /sys/class/infiniband/<device>/node_desc
@@ -47,6 +49,7 @@ KernelVersion: v2.6.12
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ===============================================
lid: (RO) Port LID
rate: (RO) Port data rate (active width * active
@@ -66,8 +69,9 @@ Description:
cap_mask: (RO) Port capability mask. 2 bits here are
settable- IsCommunicationManagementSupported
- (set when CM module is loaded) and IsSM (set via
- open of issmN file).
+ (set when CM module is loaded) and IsSM (set
+ via open of issmN file).
+ =============== ===============================================
What: /sys/class/infiniband/<device>/ports/<port-num>/link_layer
@@ -103,8 +107,7 @@ Date: Apr, 2005
KernelVersion: v2.6.12
Contact: linux-rdma at vger.kernel.org
Description:
- Errors info:
- -----------
+ **Errors info**:
symbol_error: (RO) Total number of minor link errors detected on
one or more physical lanes.
@@ -142,8 +145,7 @@ Description:
intervention. It can also indicate hardware issues or extremely
poor link signal integrity
- Data info:
- ---------
+ **Data info**:
port_xmit_data: (RO) Total number of data octets, divided by 4
(lanes), transmitted on all VLs. This is 64 bit counter
@@ -176,8 +178,7 @@ Description:
transmitted on all VLs from the port. This may include multicast
packets with errors.
- Misc info:
- ---------
+ **Misc info**:
port_xmit_discards: (RO) Total number of outbound packets
discarded by the port because the port is down or congested.
@@ -244,9 +245,11 @@ Description:
two umad devices and two issm devices, while a switch will have
one device of each type (for switch port 0).
+ ======= =====================================
ibdev: (RO) Show Infiniband (IB) device name
port: (RO) Display port number
+ ======= =====================================
What: /sys/class/infiniband_mad/abi_version
@@ -264,10 +267,12 @@ Date: Sept, 2005
KernelVersion: v2.6.14
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ===========================================
ibdev: (RO) Display Infiniband (IB) device name
abi_version: (RO) Show ABI version of IB device specific
interfaces.
+ =============== ===========================================
What: /sys/class/infiniband_verbs/abi_version
@@ -289,12 +294,14 @@ Date: Apr, 2005
KernelVersion: v2.6.12
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ================================================
hw_rev: (RO) Hardware revision number
hca_type: (RO) Host Channel Adapter type: MT23108, MT25208
(MT23108 compat mode), MT25208 or MT25204
board_id: (RO) Manufacturing board ID
+ =============== ================================================
sysfs interface for Mellanox ConnectX HCA IB driver (mlx4)
@@ -307,11 +314,13 @@ Date: Sep, 2007
KernelVersion: v2.6.24
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ===============================
hw_rev: (RO) Hardware revision number
hca_type: (RO) Host channel adapter type
board_id: (RO) Manufacturing board ID
+ =============== ===============================
What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/gids/<n>
@@ -337,6 +346,7 @@ Description:
example, ports/1/pkeys/10 contains the value at index 10 in port
1's P_Key table.
+ ======================= ==========================================
gids/<n>: (RO) The physical port gids n = 0..127
admin_guids/<n>: (RW) Allows examining or changing the
@@ -365,6 +375,7 @@ Description:
guest, whenever it uses its pkey index
1, will actually be using the real pkey
index 10.
+ ======================= ==========================================
What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/smi_enabled
@@ -376,12 +387,14 @@ Description:
Enabling QP0 on VFs for selected VF/port. By default, no VFs are
enabled for QP0 operation.
- smi_enabled: (RO) Indicates whether smi is currently enabled
- for the indicated VF/port
+ ================= ==== ===========================================
+ smi_enabled: (RO) Indicates whether smi is currently enabled
+ for the indicated VF/port
- enable_smi_admin:(RW) Used by the admin to request that smi
- capability be enabled or disabled for the
- indicated VF/port. 0 = disable, 1 = enable.
+ enable_smi_admin: (RW) Used by the admin to request that smi
+ capability be enabled or disabled for the
+ indicated VF/port. 0 = disable, 1 = enable.
+ ================= ==== ===========================================
The requested enablement will occur at the next reset of the VF
(e.g. driver restart on the VM which owns the VF).
@@ -398,6 +411,7 @@ KernelVersion: v2.6.35
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== =============================================
hw_rev: (RO) Hardware revision number
hca_type: (RO) Driver short name. Should normally match
@@ -406,6 +420,7 @@ Description:
board_id: (RO) Manufacturing board id. (Vendor + device
information)
+ =============== =============================================
sysfs interface for Intel IB driver qib
@@ -426,6 +441,7 @@ Date: May, 2010
KernelVersion: v2.6.35
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ======================================================
version: (RO) Display version information of installed software
and drivers.
@@ -452,6 +468,7 @@ Description:
chip_reset: (WO) Reset the chip if possible by writing
"reset" to this file. Only allowed if no user
contexts are open that use chip resources.
+ =============== ======================================================
What: /sys/class/infiniband/qibX/ports/N/sl2vl/[0-15]
@@ -471,14 +488,16 @@ Contact: linux-rdma at vger.kernel.org
Description:
Per-port congestion control. Both are binary attributes.
- cc_table_bin: (RO) Congestion control table size followed by
+ =============== ================================================
+ cc_table_bin (RO) Congestion control table size followed by
table entries.
- cc_settings_bin:(RO) Congestion settings: port control, control
+ cc_settings_bin (RO) Congestion settings: port control, control
map and an array of 16 entries for the
congestion entries - increase, timer, event log
trigger threshold and the minimum injection rate
delay.
+ =============== ================================================
What: /sys/class/infiniband/qibX/ports/N/linkstate/loopback
What: /sys/class/infiniband/qibX/ports/N/linkstate/led_override
@@ -491,6 +510,7 @@ Contact: linux-rdma at vger.kernel.org
Description:
[to be documented]
+ =============== ===============================================
loopback: (WO)
led_override: (WO)
hrtbt_enable: (RW)
@@ -501,6 +521,7 @@ Description:
errors. Possible states are- "Initted",
"Present", "IB_link_up", "IB_configured" or
"Fatal_Hardware_Error".
+ =============== ===============================================
What: /sys/class/infiniband/qibX/ports/N/diag_counters/rc_resends
What: /sys/class/infiniband/qibX/ports/N/diag_counters/seq_naks
@@ -549,6 +570,7 @@ Contact: Christian Benvenuti <benve at cisco.com>,
linux-rdma at vger.kernel.org
Description:
+ =============== ===============================================
board_id: (RO) Manufacturing board id
config: (RO) Report the configuration for this PF
@@ -561,6 +583,7 @@ Description:
iface: (RO) Shows which network interface this usNIC
entry is associated to (visible with ifconfig).
+ =============== ===============================================
What: /sys/class/infiniband/usnic_X/qpn/summary
What: /sys/class/infiniband/usnic_X/qpn/context
@@ -605,6 +628,7 @@ Date: May, 2016
KernelVersion: v4.6
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== =============================================
hw_rev: (RO) Hardware revision number
board_id: (RO) Manufacturing board id
@@ -623,6 +647,7 @@ Description:
available.
tempsense: (RO) Thermal sense information
+ =============== =============================================
What: /sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_settings_bin
@@ -634,19 +659,21 @@ Contact: linux-rdma at vger.kernel.org
Description:
Per-port congestion control.
- cc_table_bin: (RO) CCA tables used by PSM2 Congestion control
+ =============== ================================================
+ cc_table_bin (RO) CCA tables used by PSM2 Congestion control
table size followed by table entries. Binary
attribute.
- cc_settings_bin:(RO) Congestion settings: port control, control
+ cc_settings_bin (RO) Congestion settings: port control, control
map and an array of 16 entries for the
congestion entries - increase, timer, event log
trigger threshold and the minimum injection rate
delay. Binary attribute.
- cc_prescan: (RW) enable prescanning for faster BECN
+ cc_prescan (RW) enable prescanning for faster BECN
response. Write "on" to enable and "off" to
disable.
+ =============== ================================================
What: /sys/class/infiniband/hfi1_X/ports/N/sc2vl/[0-31]
What: /sys/class/infiniband/hfi1_X/ports/N/sl2sc/[0-31]
@@ -655,11 +682,13 @@ Date: May, 2016
KernelVersion: v4.6
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ===================================================
sc2vl/: (RO) 32 files (0 - 31) used to translate sl->vl
sl2sc/: (RO) 32 files (0 - 31) used to translate sl->sc
vl2mtu/: (RO) 16 files (0 - 15) used to determine MTU for vl
+ =============== ===================================================
What: /sys/class/infiniband/hfi1_X/sdma_N/cpu_list
@@ -670,26 +699,28 @@ Contact: linux-rdma at vger.kernel.org
Description:
sdma<N>/ contains one directory per sdma engine (0 - 15)
+ =============== ==============================================
cpu_list: (RW) List of cpus for user-process to sdma
engine assignment.
vl: (RO) Displays the virtual lane (vl) the sdma
engine maps to.
+ =============== ==============================================
This interface gives the user control on the affinity settings
for the device. As an example, to set an sdma engine irq
affinity and thread affinity of a user processes to use the
sdma engine, which is "near" in terms of NUMA configuration, or
- physical cpu location, the user will do:
+ physical cpu location, the user will do::
- echo "3" > /proc/irq/<N>/smp_affinity_list
- echo "4-7" > /sys/devices/.../sdma3/cpu_list
- cat /sys/devices/.../sdma3/vl
- 0
- echo "8" > /proc/irq/<M>/smp_affinity_list
- echo "9-12" > /sys/devices/.../sdma4/cpu_list
- cat /sys/devices/.../sdma4/vl
- 1
+ echo "3" > /proc/irq/<N>/smp_affinity_list
+ echo "4-7" > /sys/devices/.../sdma3/cpu_list
+ cat /sys/devices/.../sdma3/vl
+ 0
+ echo "8" > /proc/irq/<M>/smp_affinity_list
+ echo "9-12" > /sys/devices/.../sdma4/cpu_list
+ cat /sys/devices/.../sdma4/vl
+ 1
to make sure that when a process runs on cpus 4,5,6, or 7, and
uses vl=0, then sdma engine 3 is selected by the driver, and
@@ -711,11 +742,13 @@ Date: Jan, 2016
KernelVersion: v4.10
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ==== ========================
hw_rev: (RO) Hardware revision number
hca_type: (RO) Show HCA type (I40IW)
board_id: (RO) I40IW board ID
+ =============== ==== ========================
sysfs interface for QLogic qedr NIC Driver
@@ -728,9 +761,11 @@ KernelVersion: v4.10
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ==== ========================
hw_rev: (RO) Hardware revision number
hca_type: (RO) Display HCA type
+ =============== ==== ========================
sysfs interface for VMware Paravirtual RDMA driver
@@ -744,11 +779,13 @@ KernelVersion: v4.10
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ==== =====================================
hw_rev: (RO) Hardware revision number
hca_type: (RO) Host channel adapter type
board_id: (RO) Display PVRDMA manufacturing board ID
+ =============== ==== =====================================
sysfs interface for Broadcom NetXtreme-E RoCE driver
@@ -760,6 +797,8 @@ Date: Feb, 2017
KernelVersion: v4.11
Contact: linux-rdma at vger.kernel.org
Description:
+ =============== ==== =========================
hw_rev: (RO) Hardware revision number
hca_type: (RO) Host channel adapter type
+ =============== ==== =========================
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
index 5b154f922643..037979f7dc4b 100644
--- a/Documentation/ABI/stable/sysfs-class-rfkill
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -2,7 +2,7 @@ rfkill - radio frequency (RF) connector kill switch support
For details to this subsystem look at Documentation/driver-api/rfkill.rst.
-For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+For the deprecated ``/sys/class/rfkill/*/claim`` knobs of this interface look in
Documentation/ABI/removed/sysfs-class-rfkill.
What: /sys/class/rfkill
@@ -36,9 +36,10 @@ KernelVersion v2.6.22
Contact: linux-wireless at vger.kernel.org
Description: Whether the soft blocked state is initialised from non-volatile
storage at startup.
-Values: A numeric value.
- 0: false
- 1: true
+Values: A numeric value:
+
+ - 0: false
+ - 1: true
What: /sys/class/rfkill/rfkill[0-9]+/state
@@ -54,6 +55,7 @@ Description: Current state of the transmitter.
through this interface. There will likely be another attempt to
remove it in the future.
Values: A numeric value.
+
0: RFKILL_STATE_SOFT_BLOCKED
transmitter is turned off by software
1: RFKILL_STATE_UNBLOCKED
@@ -69,6 +71,7 @@ KernelVersion v2.6.34
Contact: linux-wireless at vger.kernel.org
Description: Current hardblock state. This file is read only.
Values: A numeric value.
+
0: inactive
The transmitter is (potentially) active.
1: active
@@ -82,7 +85,9 @@ KernelVersion v2.6.34
Contact: linux-wireless at vger.kernel.org
Description: Current softblock state. This file is read and write.
Values: A numeric value.
+
0: inactive
The transmitter is (potentially) active.
+
1: active
The transmitter is turned off by software.
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
index 58e94e7d55be..ec464cf7861a 100644
--- a/Documentation/ABI/stable/sysfs-class-tpm
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -32,11 +32,11 @@ KernelVersion: 2.6.12
Contact: linux-integrity at vger.kernel.org
Description: The "caps" property contains TPM manufacturer and version info.
- Example output:
+ Example output::
- Manufacturer: 0x53544d20
- TCG version: 1.2
- Firmware version: 8.16
+ Manufacturer: 0x53544d20
+ TCG version: 1.2
+ Firmware version: 8.16
Manufacturer is a hex dump of the 4 byte manufacturer info
space in a TPM. TCG version shows the TCG TPM spec level that
@@ -54,9 +54,9 @@ Description: The "durations" property shows the 3 vendor-specific values
any longer than necessary before starting to poll for a
result.
- Example output:
+ Example output::
- 3015000 4508000 180995000 [original]
+ 3015000 4508000 180995000 [original]
Here the short, medium and long durations are displayed in
usecs. "[original]" indicates that the values are displayed
@@ -92,14 +92,14 @@ Description: The "pcrs" property will dump the current value of all Platform
values may be constantly changing, the output is only valid
for a snapshot in time.
- Example output:
+ Example output::
- PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
- PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
- PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
- PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
- PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
- ...
+ PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ ...
The number of PCRs and hex bytes needed to represent a PCR
value will vary depending on TPM chip version. For TPM 1.1 and
@@ -119,44 +119,44 @@ Description: The "pubek" property will return the TPM's public endorsement
ated at TPM manufacture time and exists for the life of the
chip.
- Example output:
+ Example output::
- Algorithm: 00 00 00 01
- Encscheme: 00 03
- Sigscheme: 00 01
- Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
- Modulus length: 256
- Modulus:
- B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
- 3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
- 1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
- 86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
- D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
- 82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
- 0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
- 1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
- 6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
- A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
- 47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
- 10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
- E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
- F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
- F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
- C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+ Algorithm: 00 00 00 01
+ Encscheme: 00 03
+ Sigscheme: 00 01
+ Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+ Modulus length: 256
+ Modulus:
+ B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+ 3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+ 1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+ 86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+ D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+ 82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+ 0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+ 1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+ 6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+ A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+ 47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+ 10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+ E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+ F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+ F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+ C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
- Possible values:
+ Possible values::
- Algorithm: TPM_ALG_RSA (1)
- Encscheme: TPM_ES_RSAESPKCSv15 (2)
+ Algorithm: TPM_ALG_RSA (1)
+ Encscheme: TPM_ES_RSAESPKCSv15 (2)
TPM_ES_RSAESOAEP_SHA1_MGF1 (3)
- Sigscheme: TPM_SS_NONE (1)
- Parameters, a byte string of 3 u32 values:
+ Sigscheme: TPM_SS_NONE (1)
+ Parameters, a byte string of 3 u32 values:
Key Length (bits): 00 00 08 00 (2048)
Num primes: 00 00 00 02 (2)
Exponent Size: 00 00 00 00 (0 means the
default exp)
- Modulus Length: 256 (bytes)
- Modulus: The 256 byte Endorsement Key modulus
+ Modulus Length: 256 (bytes)
+ Modulus: The 256 byte Endorsement Key modulus
What: /sys/class/tpm/tpmX/device/temp_deactivated
Date: April 2006
@@ -176,9 +176,9 @@ Description: The "timeouts" property shows the 4 vendor-specific values
timeouts is defined by the TPM interface spec that the chip
conforms to.
- Example output:
+ Example output::
- 750000 750000 750000 750000 [original]
+ 750000 750000 750000 750000 [original]
The four timeout values are shown in usecs, with a trailing
"[original]" or "[adjusted]" depending on whether the values
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
index 4404bd9b96c1..42bf1eab5677 100644
--- a/Documentation/ABI/stable/sysfs-devices
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -1,5 +1,6 @@
-# Note: This documents additional properties of any device beyond what
-# is documented in Documentation/admin-guide/sysfs-rules.rst
+Note:
+ This documents additional properties of any device beyond what
+ is documented in Documentation/admin-guide/sysfs-rules.rst
What: /sys/devices/*/of_node
Date: February 2015
diff --git a/Documentation/ABI/stable/sysfs-driver-ib_srp b/Documentation/ABI/stable/sysfs-driver-ib_srp
index 84972a57caae..bada15a329f7 100644
--- a/Documentation/ABI/stable/sysfs-driver-ib_srp
+++ b/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -6,6 +6,7 @@ Description: Interface for making ib_srp connect to a new target.
One can request ib_srp to connect to a new target by writing
a comma-separated list of login parameters to this sysfs
attribute. The supported parameters are:
+
* id_ext, a 16-digit hexadecimal number specifying the eight
byte identifier extension in the 16-byte SRP target port
identifier. The target port identifier is sent by ib_srp
diff --git a/Documentation/ABI/stable/sysfs-firmware-efi-vars b/Documentation/ABI/stable/sysfs-firmware-efi-vars
index 5def20b9019e..46ccd233e359 100644
--- a/Documentation/ABI/stable/sysfs-firmware-efi-vars
+++ b/Documentation/ABI/stable/sysfs-firmware-efi-vars
@@ -17,6 +17,7 @@ Description:
directory has a name of the form "<key>-<vendor guid>"
and contains the following files:
+ =============== ========================================
attributes: A read-only text file enumerating the
EFI variable flags. Potential values
include:
@@ -59,12 +60,14 @@ Description:
size: As ASCII representation of the size of
the variable's value.
+ =============== ========================================
In addition, two other magic binary files are provided
in the top-level directory and are used for adding and
removing variables:
+ =============== ========================================
new_var: Takes a "struct efi_variable" and
instructs the EFI firmware to create a
new variable.
@@ -73,3 +76,4 @@ Description:
instructs the EFI firmware to remove any
variable that has a matching vendor GUID
and variable key name.
+ =============== ========================================
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-dump b/Documentation/ABI/stable/sysfs-firmware-opal-dump
index 32fe7f5c4880..1f74f45327ba 100644
--- a/Documentation/ABI/stable/sysfs-firmware-opal-dump
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-dump
@@ -7,6 +7,7 @@ Description:
This is only for the powerpc/powernv platform.
+ =============== ===============================================
initiate_dump: When '1' is written to it,
we will initiate a dump.
Read this file for supported commands.
@@ -19,8 +20,11 @@ Description:
and ID of the dump, use the id and type files.
Do not rely on any particular size of dump
type or dump id.
+ =============== ===============================================
Each dump has the following files:
+
+ =============== ===============================================
id: An ASCII representation of the dump ID
in hex (e.g. '0x01')
type: An ASCII representation of the type of
@@ -39,3 +43,4 @@ Description:
inaccessible.
Reading this file will get a list of
supported actions.
+ =============== ===============================================
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-elog b/Documentation/ABI/stable/sysfs-firmware-opal-elog
index 2536434d49d0..7c8a61a2d005 100644
--- a/Documentation/ABI/stable/sysfs-firmware-opal-elog
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-elog
@@ -38,6 +38,7 @@ Description:
For each log entry (directory), there are the following
files:
+ ============== ================================================
id: An ASCII representation of the ID of the
error log, in hex - e.g. "0x01".
@@ -58,3 +59,4 @@ Description:
entry will be removed from sysfs.
Reading this file will list the supported
operations (currently just acknowledge).
+ ============== ================================================
diff --git a/Documentation/ABI/stable/sysfs-hypervisor-xen b/Documentation/ABI/stable/sysfs-hypervisor-xen
index 3cf5cdfcd9a8..748593c64568 100644
--- a/Documentation/ABI/stable/sysfs-hypervisor-xen
+++ b/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -33,6 +33,8 @@ Description: If running under Xen:
Space separated list of supported guest system types. Each type
is in the format: <class>-<major>.<minor>-<arch>
With:
+
+ ======== ============================================
<class>: "xen" -- x86: paravirtualized, arm: standard
"hvm" -- x86 only: fully virtualized
<major>: major guest interface version
@@ -43,6 +45,7 @@ Description: If running under Xen:
"x86_64": 64 bit x86 guest
"armv7l": 32 bit arm guest
"aarch64": 64 bit arm guest
+ ======== ============================================
What: /sys/hypervisor/properties/changeset
Date: March 2009
diff --git a/Documentation/ABI/stable/vdso b/Documentation/ABI/stable/vdso
index 55406ec8a35a..73ed1240a5c0 100644
--- a/Documentation/ABI/stable/vdso
+++ b/Documentation/ABI/stable/vdso
@@ -23,6 +23,7 @@ Unless otherwise noted, the set of symbols with any given version and the
ABI of those symbols is considered stable. It may vary across architectures,
though.
-(As of this writing, this ABI documentation as been confirmed for x86_64.
+Note:
+ As of this writing, this ABI documentation as been confirmed for x86_64.
The maintainers of the other vDSO-using architectures should confirm
- that it is correct for their architecture.)
+ that it is correct for their architecture.
--
2.26.2
More information about the Linuxppc-dev
mailing list