[PATCH] powerpc: Send SIGBUS from machine_check

Michael Ellerman mpe at ellerman.id.au
Fri Oct 23 11:57:51 AEDT 2020


Joakim Tjernlund <joakim.tjernlund at infinera.com> writes:
> Embedded PPC CPU should send SIGBUS to user space when applicable.

Yeah, but it's not clear that it's applicable in all cases.

At least I need some reasoning for why it's safe in all cases below to
just send a SIGBUS and take no other action.

Is there a particular CPU you're working on? Can we start with that and
look at all the machine check causes and which can be safely handled.

Some comments below ...


> diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
> index 0381242920d9..12715d24141c 100644
> --- a/arch/powerpc/kernel/traps.c
> +++ b/arch/powerpc/kernel/traps.c
> @@ -621,6 +621,11 @@ int machine_check_e500mc(struct pt_regs *regs)

At the beginning of the function we have:

	printk("Machine check in kernel mode.\n");

Which should be updated.

>  		       reason & MCSR_MEA ? "Effective" : "Physical", addr);
>  	}
>  
> +	if ((user_mode(regs))) {
> +		_exception(SIGBUS, regs, reason, regs->nip);
> +		recoverable = 1;
> +	}

For most of the error causes we take no action and set recoverable = 0.

Then you just declare that it is recoverable because it hit in
userspace. Depending on the cause that might be OK, but it's not
obviously correct in all cases.


> +
>  silent_out:
>  	mtspr(SPRN_MCSR, mcsr);
>  	return mfspr(SPRN_MCSR) == 0 && recoverable;
> @@ -665,6 +670,10 @@ int machine_check_e500(struct pt_regs *regs)

Same comment about the printk().

>  	if (reason & MCSR_BUS_RPERR)
>  		printk("Bus - Read Parity Error\n");
>  
> +	if ((user_mode(regs))) {
> +		_exception(SIGBUS, regs, reason, regs->nip);
> +		return 1;
> +	}

And same comment more or less.

Other than the MCSR_BUS_RBERR cases that are explicitly checked, the
function does nothing to clear the cause of the machine check.

>  	return 0;
>  }
>  
> @@ -695,6 +704,10 @@ int machine_check_e200(struct pt_regs *regs)
>  	if (reason & MCSR_BUS_WRERR)
>  		printk("Bus - Write Bus Error on buffered store or cache line push\n");
>  
> +	if ((user_mode(regs))) {
> +		_exception(SIGBUS, regs, reason, regs->nip);
> +		return 1;
> +	}

Same.

>  	return 0;
>  }
>  #elif defined(CONFIG_PPC32)
> @@ -731,6 +744,10 @@ int machine_check_generic(struct pt_regs *regs)
>  	default:
>  		printk("Unknown values in msr\n");
>  	}
> +	if ((user_mode(regs))) {
> +		_exception(SIGBUS, regs, reason, regs->nip);
> +		return 1;
> +	}

Same.

>  	return 0;
>  }
>  #endif /* everything else */
> -- 
> 2.26.2


cheers


More information about the Linuxppc-dev mailing list