[PATCH 6/8] powerpc/signal64: Replace setup_trampoline() w/ unsafe_setup_trampoline()

[Christophe Leroy]

Le 15/10/2020 à 17:01, Christopher M. Riedl a écrit :
> From: Daniel Axtens <dja at axtens.net>
> 
> Previously setup_trampoline() performed a costly KUAP switch on every
> uaccess operation. These repeated uaccess switches cause a significant
> drop in signal handling performance.
> 
> Rewrite setup_trampoline() to assume that a userspace write access
> window is open. Replace all uaccess functions with their 'unsafe'
> versions to avoid the repeated uaccess switches.
> 
> Signed-off-by: Daniel Axtens <dja at axtens.net>
> Signed-off-by: Christopher M. Riedl <cmr at codefail.de>
> ---
>   arch/powerpc/kernel/signal_64.c | 32 +++++++++++++++++++-------------
>   1 file changed, 19 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
> index bd92064e5576..6d4f7a5c4fbf 100644
> --- a/arch/powerpc/kernel/signal_64.c
> +++ b/arch/powerpc/kernel/signal_64.c
> @@ -600,30 +600,33 @@ static long restore_tm_sigcontexts(struct task_struct *tsk,
>   /*
>    * Setup the trampoline code on the stack
>    */
> -static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp)
> +#define unsafe_setup_trampoline(syscall, tramp, e) \
> +	unsafe_op_wrap(__unsafe_setup_trampoline(syscall, tramp), e)
> +static long notrace __unsafe_setup_trampoline(unsigned int syscall,
> +					unsigned int __user *tramp)
>   {
>   	int i;
> -	long err = 0;
>   
>   	/* bctrl # call the handler */
> -	err |= __put_user(PPC_INST_BCTRL, &tramp[0]);
> +	unsafe_put_user(PPC_INST_BCTRL, &tramp[0], err);
>   	/* addi r1, r1, __SIGNAL_FRAMESIZE  # Pop the dummy stackframe */
> -	err |= __put_user(PPC_INST_ADDI | __PPC_RT(R1) | __PPC_RA(R1) |
> -			  (__SIGNAL_FRAMESIZE & 0xffff), &tramp[1]);
> +	unsafe_put_user(PPC_INST_ADDI | __PPC_RT(R1) | __PPC_RA(R1) |
> +			  (__SIGNAL_FRAMESIZE & 0xffff), &tramp[1], err);
>   	/* li r0, __NR_[rt_]sigreturn| */
> -	err |= __put_user(PPC_INST_ADDI | (syscall & 0xffff), &tramp[2]);
> +	unsafe_put_user(PPC_INST_ADDI | (syscall & 0xffff), &tramp[2], err);
>   	/* sc */
> -	err |= __put_user(PPC_INST_SC, &tramp[3]);
> +	unsafe_put_user(PPC_INST_SC, &tramp[3], err);
>   
>   	/* Minimal traceback info */
>   	for (i=TRAMP_TRACEBACK; i < TRAMP_SIZE ;i++)
> -		err |= __put_user(0, &tramp[i]);
> +		unsafe_put_user(0, &tramp[i], err);
>   
> -	if (!err)
> -		flush_icache_range((unsigned long) &tramp[0],
> -			   (unsigned long) &tramp[TRAMP_SIZE]);
> +	flush_icache_range((unsigned long)&tramp[0],
> +			   (unsigned long)&tramp[TRAMP_SIZE]);

This flush should be done outside the user_write_access block.

>   
> -	return err;
> +	return 0;
> +err:
> +	return 1;
>   }
>   
>   /*
> @@ -888,7 +891,10 @@ int handle_rt_signal64(struct ksignal *ksig, sigset_t *set,
>   	if (vdso64_rt_sigtramp && tsk->mm->context.vdso_base) {
>   		regs->nip = tsk->mm->context.vdso_base + vdso64_rt_sigtramp;
>   	} else {
> -		err |= setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
> +		if (!user_write_access_begin(frame, sizeof(struct rt_sigframe)))
> +			return -EFAULT;
> +		err |= __unsafe_setup_trampoline(__NR_rt_sigreturn, &frame->tramp[0]);
> +		user_write_access_end();
>   		if (err)
>   			goto badframe;
>   		regs->nip = (unsigned long) &frame->tramp[0];
> 

Christophe