[PATCH 20/20] arch: dts: Fix DWC USB3 DT nodes name
Serge Semin
Sergey.Semin at baikalelectronics.ru
Wed Oct 14 21:14:02 AEDT 2020
In accordance with the DWC USB3 bindings the corresponding node name is
suppose to comply with Generic USB HCD DT schema, which requires the USB
nodes to have the name acceptable by the regexp: "^usb(@.*)?" . But a lot
of the DWC USB3-compatible nodes defined in the ARM/ARM64 DTS files have
name as "^dwc3 at .*" or "^usb[1-3]@.*" or even "^dwusb at .*", which will cause
the dtbs_check procedure failure. Let's fix the nodes naming to be
compatible with the DWC USB3 DT schema to make dtbs_check happy.
Note we don't change the DWC USB3-compatible nodes names of
arch/arm64/boot/dts/apm/{apm-storm.dtsi,apm-shadowcat.dtsi} since the
in-source comment says that the nodes name need to be preserved as
"^dwusb at .*" for some backward compatibility.
Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
---
Please, test the patch out to make sure it doesn't brake the dependent DTS
files. I did only a manual grepping of the possible nodes dependencies.
---
arch/arm/boot/dts/armada-375.dtsi | 2 +-
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
arch/arm/boot/dts/exynos54xx.dtsi | 4 ++--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 ++--
arch/arm/boot/dts/keystone.dtsi | 2 +-
arch/arm/boot/dts/ls1021a.dtsi | 2 +-
arch/arm/boot/dts/omap5-l4.dtsi | 2 +-
arch/arm/boot/dts/stih407-family.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 2 +-
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++--
arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 2 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
25 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 9805e507c695..7f2f24a29e6c 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -426,7 +426,7 @@ usb1: usb at 54000 {
status = "disabled";
};
- usb2: usb3 at 58000 {
+ usb2: usb at 58000 {
compatible = "marvell,armada-375-xhci";
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index e3dbe4166836..ebcf8b40ea81 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -629,7 +629,7 @@ usb_dwc3 {
#size-cells = <1>;
ranges;
- usbdrd_dwc3: dwc3 at 12000000 {
+ usbdrd_dwc3: usb at 12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 8aa5117e58ce..339243d19a80 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -148,7 +148,7 @@ usbdrd3_0: usb3-0 {
#size-cells = <1>;
ranges;
- usbdrd_dwc3_0: dwc3 at 12000000 {
+ usbdrd_dwc3_0: usb at 12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
@@ -170,7 +170,7 @@ usbdrd3_1: usb3-1 {
#size-cells = <1>;
ranges;
- usbdrd_dwc3_1: dwc3 at 12400000 {
+ usbdrd_dwc3_1: usb at 12400000 {
compatible = "snps,dwc3";
reg = <0x12400000 0x10000>;
phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 2d94faf31fab..d625ad10cfad 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -52,7 +52,7 @@ &soc0 {
usb: usb at 2680000 {
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
- dwc3 at 2690000 {
+ usb at 2690000 {
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
};
};
@@ -78,7 +78,7 @@ keystone_usb1: usb at 25000000 {
dma-ranges;
status = "disabled";
- usb1: dwc3 at 25010000 {
+ usb1: usb at 25010000 {
compatible = "synopsys,dwc3";
reg = <0x25010000 0x70000>;
interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c298675a29a5..6f9748349f09 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -217,7 +217,7 @@ keystone_usb0: usb at 2680000 {
dma-ranges;
status = "disabled";
- usb0: dwc3 at 2690000 {
+ usb0: usb at 2690000 {
compatible = "synopsys,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 827373ef1a54..5c4104d301f1 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -874,7 +874,7 @@ usb2: usb at 8600000 {
phy_type = "ulpi";
};
- usb3: usb3 at 3100000 {
+ usb3: usb at 3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index f3d3a16b7c64..887b3359dd5a 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -194,7 +194,7 @@ usb3: omap_dwc3 at 0 {
#size-cells = <1>;
utmi-mode = <2>;
ranges = <0 0 0x20000>;
- dwc3: dwc3 at 10000 {
+ dwc3: usb at 10000 {
compatible = "snps,dwc3";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 23a1746f3baa..2352f76b5a69 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -681,7 +681,7 @@ st_dwc3: dwc3 at 8f94000 {
status = "disabled";
- dwc3: dwc3 at 9900000 {
+ dwc3: usb at 9900000 {
compatible = "snps,dwc3";
reg = <0x09900000 0x100000>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 9ce78a7b117d..7d1bbff25294 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -679,7 +679,7 @@ ohci0: usb at 5101400 {
status = "disabled";
};
- dwc3: dwc3 at 5200000 {
+ dwc3: usb at 5200000 {
compatible = "snps,dwc3";
reg = <0x05200000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 74ac4ac75865..3320e596cb3f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1651,7 +1651,7 @@ usbdrd30: usbdrd {
ranges;
status = "disabled";
- usbdrd_dwc3: dwc3 at 15400000 {
+ usbdrd_dwc3: usb at 15400000 {
compatible = "snps,dwc3";
clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
<&cmu_fsys CLK_ACLK_USBDRD30>,
@@ -1704,7 +1704,7 @@ usbhost30: usbhost {
ranges;
status = "disabled";
- usbhost_dwc3: dwc3 at 15a00000 {
+ usbhost_dwc3: usb at 15a00000 {
compatible = "snps,dwc3";
clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
<&cmu_fsys CLK_ACLK_USBHOST30>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index b9ed6a33e290..48cd3a04fd07 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -654,7 +654,7 @@ usbdrd3 {
#size-cells = <1>;
ranges;
- dwc3 at 15400000 {
+ usb at 15400000 {
compatible = "snps,dwc3";
reg = <0x15400000 0x10000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index ff19ec415b60..06dac6be67e9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -453,7 +453,7 @@ edma0: edma at 2c00000 {
<&clockgen 4 3>;
};
- usb0: usb3 at 2f00000 {
+ usb0: usb at 2f00000 {
compatible = "snps,dwc3";
reg = <0x0 0x2f00000 0x0 0x10000>;
interrupts = <0 60 0x4>;
@@ -474,7 +474,7 @@ sata: sata at 3200000 {
status = "disabled";
};
- usb1: usb2 at 8600000 {
+ usb1: usb at 8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
reg = <0x0 0x8600000 0x0 0x1000>;
interrupts = <0 139 0x4>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 5c2e370f6316..1f45fa32e57b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -750,7 +750,7 @@ edma0: edma at 2c00000 {
<&clockgen 4 0>;
};
- usb0: usb3 at 2f00000 {
+ usb0: usb at 2f00000 {
compatible = "snps,dwc3";
reg = <0x0 0x2f00000 0x0 0x10000>;
interrupts = <0 60 0x4>;
@@ -761,7 +761,7 @@ usb0: usb3 at 2f00000 {
status = "disabled";
};
- usb1: usb3 at 3000000 {
+ usb1: usb at 3000000 {
compatible = "snps,dwc3";
reg = <0x0 0x3000000 0x0 0x10000>;
interrupts = <0 61 0x4>;
@@ -772,7 +772,7 @@ usb1: usb3 at 3000000 {
status = "disabled";
};
- usb2: usb3 at 3100000 {
+ usb2: usb at 3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <0 63 0x4>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 169f4742ae3b..96723b53a4e9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -402,7 +402,7 @@ esdhc: esdhc at 2140000 {
status = "disabled";
};
- usb0: usb3 at 3100000 {
+ usb0: usb at 3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -413,7 +413,7 @@ usb0: usb3 at 3100000 {
status = "disabled";
};
- usb1: usb3 at 3110000 {
+ usb1: usb at 3110000 {
compatible = "snps,dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 41102dacc2e1..d356ec2beee3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -737,7 +737,7 @@ sata1: sata at 3210000 {
dma-coherent;
};
- usb0: usb3 at 3100000 {
+ usb0: usb at 3100000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
@@ -748,7 +748,7 @@ usb0: usb3 at 3100000 {
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
- usb1: usb3 at 3110000 {
+ usb1: usb at 3110000 {
status = "disabled";
compatible = "snps,dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index d25aac5e0bf8..aea3800029b5 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1166,7 +1166,7 @@ usb_phy: usb-phy {
};
};
- dwc3: dwc3 at ff100000 {
+ dwc3: usb at ff100000 {
compatible = "snps,dwc3";
reg = <0x0 0xff100000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index defcbd15edf9..34e97da98270 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -1064,7 +1064,7 @@ &usb2 {
status = "okay";
extcon = <&usb2_id>;
- dwc3 at 7600000 {
+ usb at 7600000 {
extcon = <&usb2_id>;
dr_mode = "otg";
maximum-speed = "high-speed";
@@ -1075,7 +1075,7 @@ &usb3 {
status = "okay";
extcon = <&usb3_id>;
- dwc3 at 6a00000 {
+ usb at 6a00000 {
extcon = <&usb3_id>;
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 96a5ec89b5f0..1129062a4ca1 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -427,7 +427,7 @@ usb_0: usb at 8af8800 {
resets = <&gcc GCC_USB0_BCR>;
status = "disabled";
- dwc_0: dwc3 at 8a00000 {
+ dwc_0: usb at 8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -468,7 +468,7 @@ usb_1: usb at 8cf8800 {
resets = <&gcc GCC_USB1_BCR>;
status = "disabled";
- dwc_1: dwc3 at 8c00000 {
+ dwc_1: usb at 8c00000 {
compatible = "snps,dwc3";
reg = <0x8c00000 0xcd00>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 9951286db775..66b6d2f0a093 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1767,7 +1767,7 @@ usb3: usb at 6af8800 {
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- dwc3 at 6a00000 {
+ usb at 6a00000 {
compatible = "snps,dwc3";
reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -1978,7 +1978,7 @@ usb2: usb at 76f8800 {
power-domains = <&gcc USB30_GDSC>;
status = "disabled";
- dwc3 at 7600000 {
+ usb at 7600000 {
compatible = "snps,dwc3";
reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c45870600909..7cc7897e7b83 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1678,7 +1678,7 @@ usb3: usb at a8f8800 {
resets = <&gcc GCC_USB_30_BCR>;
- usb3_dwc3: dwc3 at a800000 {
+ usb3_dwc3: usb at a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xcd00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 6422cf9d5855..88d7b7a53743 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,7 +337,7 @@ &usb2_phy_sec {
&usb3 {
status = "okay";
- dwc3 at 7580000 {
+ usb at 7580000 {
dr_mode = "host";
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index b654b802e95c..f6ef17553064 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@ usb3: usb at 7678800 {
assigned-clock-rates = <19200000>, <200000000>;
status = "disabled";
- dwc3 at 7580000 {
+ usb at 7580000 {
compatible = "snps,dwc3";
reg = <0x07580000 0xcd00>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@ usb2: usb at 79b8800 {
assigned-clock-rates = <19200000>, <133333333>;
status = "disabled";
- dwc3 at 78c0000 {
+ usb at 78c0000 {
compatible = "snps,dwc3";
reg = <0x078c0000 0xcc00>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index d46b3833e52f..bbc9a2b5c570 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2673,7 +2673,7 @@ usb_1: usb at a6f8800 {
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3 at a600000 {
+ usb_1_dwc3: usb at a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 2884577dcb77..ca20e4e91f61 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3573,7 +3573,7 @@ usb_1: usb at a6f8800 {
<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_1_dwc3: dwc3 at a600000 {
+ usb_1_dwc3: usb at a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3621,7 +3621,7 @@ usb_2: usb at a8f8800 {
<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>;
interconnect-names = "usb-ddr", "apps-usb";
- usb_2_dwc3: dwc3 at a800000 {
+ usb_2_dwc3: usb at a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index b86a7ead3006..167d14dda974 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -846,7 +846,7 @@ usb_1: usb at a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: dwc3 at a600000 {
+ usb_1_dwc3: usb at a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
--
2.27.0
More information about the Linuxppc-dev
mailing list