[PATCH] powerpc/32s: Setup the early hash table at all time.
Christophe Leroy
christophe.leroy at csgroup.eu
Fri Oct 2 01:35:38 AEST 2020
At the time being, an early hash table is set up when
CONFIG_KASAN is selected.
There is nothing wrong with setting such an early hash table
all the time, even if it is not used. This is a statically
allocated 256 kB table which lies in the init data section.
This makes the code simpler and may in the future allow to
setup early IO mappings with fixmap instead of hard coding BATs.
Put create_hpte() and flush_hash_pages() in the .ref.text section
in order to avoid warning for the reference to early_hash[]. This
reference is removed by MMU_init_hw_patch() before init memory is
freed.
Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
---
arch/powerpc/kernel/head_32.S | 13 +++++--------
arch/powerpc/mm/book3s32/hash_low.S | 9 +++++++--
arch/powerpc/mm/book3s32/mmu.c | 14 +++++---------
arch/powerpc/mm/kasan/kasan_init_32.c | 19 -------------------
4 files changed, 17 insertions(+), 38 deletions(-)
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 2bd0aa3a4cc7..b5458113e0b0 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -166,9 +166,9 @@ __after_mmu_off:
bl initial_bats
bl load_segment_registers
-#ifdef CONFIG_KASAN
+BEGIN_MMU_FTR_SECTION
bl early_hash_table
-#endif
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
#if defined(CONFIG_BOOTX_TEXT)
bl setup_disp_bat
#endif
@@ -953,7 +953,6 @@ _ENTRY(__restore_cpu_setup)
* Load stuff into the MMU. Intended to be called with
* IR=0 and DR=0.
*/
-#ifdef CONFIG_KASAN
early_hash_table:
sync /* Force all PTE updates to finish */
isync
@@ -964,8 +963,10 @@ early_hash_table:
lis r6, early_hash - PAGE_OFFSET at h
ori r6, r6, 3 /* 256kB table */
mtspr SPRN_SDR1, r6
+ lis r6, early_hash at h
+ lis r3, Hash at ha
+ stw r6, Hash at l(r3)
blr
-#endif
load_up_mmu:
sync /* Force all PTE updates to finish */
@@ -1055,11 +1056,7 @@ start_here:
bl machine_init
bl __save_cpu_setup
bl MMU_init
-#ifdef CONFIG_KASAN
-BEGIN_MMU_FTR_SECTION
bl MMU_init_hw_patch
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
-#endif
/*
* Go back to running unmapped so we can load up new values
diff --git a/arch/powerpc/mm/book3s32/hash_low.S b/arch/powerpc/mm/book3s32/hash_low.S
index 1690d369688b..8fc594ff7286 100644
--- a/arch/powerpc/mm/book3s32/hash_low.S
+++ b/arch/powerpc/mm/book3s32/hash_low.S
@@ -15,6 +15,7 @@
*/
#include <linux/pgtable.h>
+#include <linux/init.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/cputable.h>
@@ -287,9 +288,9 @@ _ASM_NOKPROBE_SYMBOL(add_hash_page)
*
* For speed, 4 of the instructions get patched once the size and
* physical address of the hash table are known. These definitions
- * of Hash_base and Hash_bits below are just an example.
+ * of Hash_base and Hash_bits below are for the early hash table.
*/
-Hash_base = 0xc0180000
+Hash_base = early_hash
Hash_bits = 12 /* e.g. 256kB hash table */
Hash_msk = (((1 << Hash_bits) - 1) * 64)
@@ -310,6 +311,7 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64)
#define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1)
#define HASH_RIGHT 31-LG_PTEG_SIZE
+__REF
_GLOBAL(create_hpte)
/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
rlwinm r8,r5,32-9,30,30 /* _PAGE_RW -> PP msb */
@@ -476,6 +478,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
sync /* make sure pte updates get to memory */
blr
+ .previous
_ASM_NOKPROBE_SYMBOL(create_hpte)
.section .bss
@@ -496,6 +499,7 @@ htab_hash_searches:
*
* We assume that there is a hash table in use (Hash != 0).
*/
+__REF
_GLOBAL(flush_hash_pages)
/*
* We disable interrupts here, even on UP, because we want
@@ -632,6 +636,7 @@ _GLOBAL(flush_hash_pages)
SYNC_601
isync
blr
+ .previous
EXPORT_SYMBOL(flush_hash_pages)
_ASM_NOKPROBE_SYMBOL(flush_hash_pages)
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index d426eaf76bb0..3cf1177738ea 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -31,6 +31,8 @@
#include <mm/mmu_decl.h>
+u8 __initdata early_hash[SZ_256K] __aligned(SZ_256K) = {0};
+
struct hash_pte *Hash;
static unsigned long Hash_size, Hash_mask;
unsigned long _SDR1;
@@ -425,15 +427,6 @@ void __init MMU_init_hw(void)
hash_mb2 = hash_mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
if (lg_n_hpteg > 16)
hash_mb2 = 16 - LG_HPTEG_SIZE;
-
- /*
- * When KASAN is selected, there is already an early temporary hash
- * table and the switch to the final hash table is done later.
- */
- if (IS_ENABLED(CONFIG_KASAN))
- return;
-
- MMU_init_hw_patch();
}
void __init MMU_init_hw_patch(void)
@@ -441,6 +434,9 @@ void __init MMU_init_hw_patch(void)
unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
unsigned int hash = (unsigned int)Hash - PAGE_OFFSET;
+ if (!mmu_has_feature(MMU_FTR_HPTE_TABLE))
+ return;
+
if (ppc_md.progress)
ppc_md.progress("hash:patch", 0x345);
if (ppc_md.progress)
diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c
index 929716ea21e9..59f61efc43af 100644
--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -174,22 +174,6 @@ void __init kasan_late_init(void)
kasan_unmap_early_shadow_vmalloc();
}
-#ifdef CONFIG_PPC_BOOK3S_32
-u8 __initdata early_hash[256 << 10] __aligned(256 << 10) = {0};
-
-static void __init kasan_early_hash_table(void)
-{
- unsigned int hash = __pa(early_hash);
-
- modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16);
- modify_instruction_site(&patch__flush_hash_A0, 0xffff, hash >> 16);
-
- Hash = (struct hash_pte *)early_hash;
-}
-#else
-static void __init kasan_early_hash_table(void) {}
-#endif
-
void __init kasan_early_init(void)
{
unsigned long addr = KASAN_SHADOW_START;
@@ -205,7 +189,4 @@ void __init kasan_early_init(void)
next = pgd_addr_end(addr, end);
pmd_populate_kernel(&init_mm, pmd, kasan_early_shadow_pte);
} while (pmd++, addr = next, addr != end);
-
- if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
- kasan_early_hash_table();
}
--
2.25.0
More information about the Linuxppc-dev
mailing list