[PATCH v3 04/19] powerpc/perf: move perf irq/nmi handling details into traps.c

[Nicholas Piggin]

This is required in order to allow more significant differences between
NMI type interrupt handlers and regular asynchronous handlers.

Signed-off-by: Nicholas Piggin <npiggin at gmail.com>
---
 arch/powerpc/kernel/traps.c      | 31 +++++++++++++++++++++++++++-
 arch/powerpc/perf/core-book3s.c  | 35 ++------------------------------
 arch/powerpc/perf/core-fsl-emb.c | 25 -----------------------
 3 files changed, 32 insertions(+), 59 deletions(-)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 902fcbd1a778..7dda72eb97cc 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1919,11 +1919,40 @@ void vsx_unavailable_tm(struct pt_regs *regs)
 }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
-void performance_monitor_exception(struct pt_regs *regs)
+static void performance_monitor_exception_nmi(struct pt_regs *regs)
+{
+	nmi_enter();
+
+	__this_cpu_inc(irq_stat.pmu_irqs);
+
+	perf_irq(regs);
+
+	nmi_exit();
+}
+
+static void performance_monitor_exception_async(struct pt_regs *regs)
 {
+	irq_enter();
+
 	__this_cpu_inc(irq_stat.pmu_irqs);
 
 	perf_irq(regs);
+
+	irq_exit();
+}
+
+void performance_monitor_exception(struct pt_regs *regs)
+{
+	/*
+	 * On 64-bit, if perf interrupts hit in a local_irq_disable
+	 * (soft-masked) region, we consider them as NMIs. This is required to
+	 * prevent hash faults on user addresses when reading callchains (and
+	 * looks better from an irq tracing perspective).
+	 */
+	if (IS_ENABLED(CONFIG_PPC64) && unlikely(arch_irq_disabled_regs(regs)))
+		performance_monitor_exception_nmi(regs);
+	else
+		performance_monitor_exception_async(regs);
 }
 
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 08643cba1494..9fd8cae09218 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -109,10 +109,6 @@ static inline void perf_read_regs(struct pt_regs *regs)
 {
 	regs->result = 0;
 }
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
-	return 0;
-}
 
 static inline int siar_valid(struct pt_regs *regs)
 {
@@ -328,15 +324,6 @@ static inline void perf_read_regs(struct pt_regs *regs)
 	regs->result = use_siar;
 }
 
-/*
- * If interrupts were soft-disabled when a PMU interrupt occurs, treat
- * it as an NMI.
- */
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
-	return (regs->softe & IRQS_DISABLED);
-}
-
 /*
  * On processors like P7+ that have the SIAR-Valid bit, marked instructions
  * must be sampled only if the SIAR-valid bit is set.
@@ -2224,7 +2211,6 @@ static void __perf_event_interrupt(struct pt_regs *regs)
 	struct perf_event *event;
 	unsigned long val[8];
 	int found, active;
-	int nmi;
 
 	if (cpuhw->n_limited)
 		freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5),
@@ -2232,18 +2218,6 @@ static void __perf_event_interrupt(struct pt_regs *regs)
 
 	perf_read_regs(regs);
 
-	/*
-	 * If perf interrupts hit in a local_irq_disable (soft-masked) region,
-	 * we consider them as NMIs. This is required to prevent hash faults on
-	 * user addresses when reading callchains. See the NMI test in
-	 * do_hash_page.
-	 */
-	nmi = perf_intr_is_nmi(regs);
-	if (nmi)
-		nmi_enter();
-	else
-		irq_enter();
-
 	/* Read all the PMCs since we'll need them a bunch of times */
 	for (i = 0; i < ppmu->n_counter; ++i)
 		val[i] = read_pmc(i + 1);
@@ -2289,8 +2263,8 @@ static void __perf_event_interrupt(struct pt_regs *regs)
 			}
 		}
 	}
-	if (!found && !nmi && printk_ratelimit())
-		printk(KERN_WARNING "Can't find PMC that caused IRQ\n");
+	if (unlikely(!found) && !arch_irq_disabled_regs(regs))
+		printk_ratelimited(KERN_WARNING "Can't find PMC that caused IRQ\n");
 
 	/*
 	 * Reset MMCR0 to its normal value.  This will set PMXE and
@@ -2300,11 +2274,6 @@ static void __perf_event_interrupt(struct pt_regs *regs)
 	 * we get back out of this interrupt.
 	 */
 	write_mmcr0(cpuhw, cpuhw->mmcr.mmcr0);
-
-	if (nmi)
-		nmi_exit();
-	else
-		irq_exit();
 }
 
 static void perf_event_interrupt(struct pt_regs *regs)
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index e0e7e276bfd2..ee721f420a7b 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -31,19 +31,6 @@ static atomic_t num_events;
 /* Used to avoid races in calling reserve/release_pmc_hardware */
 static DEFINE_MUTEX(pmc_reserve_mutex);
 
-/*
- * If interrupts were soft-disabled when a PMU interrupt occurs, treat
- * it as an NMI.
- */
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
-#ifdef __powerpc64__
-	return (regs->softe & IRQS_DISABLED);
-#else
-	return 0;
-#endif
-}
-
 static void perf_event_interrupt(struct pt_regs *regs);
 
 /*
@@ -659,13 +646,6 @@ static void perf_event_interrupt(struct pt_regs *regs)
 	struct perf_event *event;
 	unsigned long val;
 	int found = 0;
-	int nmi;
-
-	nmi = perf_intr_is_nmi(regs);
-	if (nmi)
-		nmi_enter();
-	else
-		irq_enter();
 
 	for (i = 0; i < ppmu->n_counter; ++i) {
 		event = cpuhw->event[i];
@@ -690,11 +670,6 @@ static void perf_event_interrupt(struct pt_regs *regs)
 	mtmsr(mfmsr() | MSR_PMM);
 	mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE);
 	isync();
-
-	if (nmi)
-		nmi_exit();
-	else
-		irq_exit();
 }
 
 void hw_perf_event_setup(int cpu)
-- 
2.23.0