[PATCH kernel v2] vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU

[Alexey Kardashevskiy]

We execute certain NPU2 setup code (such as mapping an LPID to a device
in NPU2) unconditionally if an Nvlink bridge is detected. However this
cannot succeed on POWER8NVL machines as the init helpers return an error
other than ENODEV which means the device is there is and setup failed so
vfio_pci_enable() fails and pass through is not possible.

This changes the two NPU2 related init helpers to return -ENODEV if
there is no "memory-region" device tree property as this is
the distinction between NPU and NPU2.

Tested on
- POWER9 pvr=004e1201, Ubuntu 19.04 host, Ubuntu 18.04 vm,
  NVIDIA GV100 10de:1db1 driver 418.39
- POWER8 pvr=004c0100, RHEL 7.6 host, Ubuntu 16.10 vm,
  NVIDIA P100 10de:15f9 driver 396.47

Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Cc: stable at vger.kernel.org # 5.0
Signed-off-by: Alexey Kardashevskiy <aik at ozlabs.ru>
---
Changes:
v2:
* updated commit log with tested configs and replaced P8+ with POWER8NVL for clarity
---
 drivers/vfio/pci/vfio_pci_nvlink2.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_nvlink2.c b/drivers/vfio/pci/vfio_pci_nvlink2.c
index 65c61710c0e9..9adcf6a8f888 100644
--- a/drivers/vfio/pci/vfio_pci_nvlink2.c
+++ b/drivers/vfio/pci/vfio_pci_nvlink2.c
@@ -231,7 +231,7 @@ int vfio_pci_nvdia_v100_nvlink2_init(struct vfio_pci_device *vdev)
 		return -EINVAL;
 
 	if (of_property_read_u32(npu_node, "memory-region", &mem_phandle))
-		return -EINVAL;
+		return -ENODEV;
 
 	mem_node = of_find_node_by_phandle(mem_phandle);
 	if (!mem_node)
@@ -393,7 +393,7 @@ int vfio_pci_ibm_npu2_init(struct vfio_pci_device *vdev)
 	int ret;
 	struct vfio_pci_npu2_data *data;
 	struct device_node *nvlink_dn;
-	u32 nvlink_index = 0;
+	u32 nvlink_index = 0, mem_phandle = 0;
 	struct pci_dev *npdev = vdev->pdev;
 	struct device_node *npu_node = pci_device_to_OF_node(npdev);
 	struct pci_controller *hose = pci_bus_to_host(npdev->bus);
@@ -408,6 +408,9 @@ int vfio_pci_ibm_npu2_init(struct vfio_pci_device *vdev)
 	if (!pnv_pci_get_gpu_dev(vdev->pdev))
 		return -ENODEV;
 
+	if (of_property_read_u32(npu_node, "memory-region", &mem_phandle))
+		return -ENODEV;
+
 	/*
 	 * NPU2 normally has 8 ATSD registers (for concurrency) and 6 links
 	 * so we can allocate one register per link, using nvlink index as
-- 
2.17.1