[PATCH net-next v2 7/9] ibmvnic: Correctly re-enable interrupts in NAPI polling routine
Thomas Falcon
tlfalcon at linux.ibm.com
Thu Nov 19 12:12:23 AEDT 2020
From: "Dwip N. Banerjee" <dnbanerg at us.ibm.com>
If the current NAPI polling loop exits without completing it's
budget, only re-enable interrupts if there are no entries remaining
in the queue and napi_complete_done is successful. If there are entries
remaining on the queue that were missed, restart the polling loop.
Signed-off-by: Dwip N. Banerjee <dnbanerg at us.ibm.com>
---
drivers/net/ethernet/ibm/ibmvnic.c | 37 +++++++++++++++++++-----------
1 file changed, 23 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 85df91c9861b..596546f0614d 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2450,10 +2450,17 @@ static void remove_buff_from_pool(struct ibmvnic_adapter *adapter,
static int ibmvnic_poll(struct napi_struct *napi, int budget)
{
- struct net_device *netdev = napi->dev;
- struct ibmvnic_adapter *adapter = netdev_priv(netdev);
- int scrq_num = (int)(napi - adapter->napi);
- int frames_processed = 0;
+ struct ibmvnic_sub_crq_queue *rx_scrq;
+ struct ibmvnic_adapter *adapter;
+ struct net_device *netdev;
+ int frames_processed;
+ int scrq_num;
+
+ netdev = napi->dev;
+ adapter = netdev_priv(netdev);
+ scrq_num = (int)(napi - adapter->napi);
+ frames_processed = 0;
+ rx_scrq = adapter->rx_scrq[scrq_num];
restart_poll:
while (frames_processed < budget) {
@@ -2466,14 +2473,14 @@ static int ibmvnic_poll(struct napi_struct *napi, int budget)
if (unlikely(test_bit(0, &adapter->resetting) &&
adapter->reset_reason != VNIC_RESET_NON_FATAL)) {
- enable_scrq_irq(adapter, adapter->rx_scrq[scrq_num]);
+ enable_scrq_irq(adapter, rx_scrq);
napi_complete_done(napi, frames_processed);
return frames_processed;
}
- if (!pending_scrq(adapter, adapter->rx_scrq[scrq_num]))
+ if (!pending_scrq(adapter, rx_scrq))
break;
- next = ibmvnic_next_scrq(adapter, adapter->rx_scrq[scrq_num]);
+ next = ibmvnic_next_scrq(adapter, rx_scrq);
rx_buff =
(struct ibmvnic_rx_buff *)be64_to_cpu(next->
rx_comp.correlator);
@@ -2532,14 +2539,16 @@ static int ibmvnic_poll(struct napi_struct *napi, int budget)
if (adapter->state != VNIC_CLOSING)
replenish_rx_pool(adapter, &adapter->rx_pool[scrq_num]);
-
if (frames_processed < budget) {
- enable_scrq_irq(adapter, adapter->rx_scrq[scrq_num]);
- napi_complete_done(napi, frames_processed);
- if (pending_scrq(adapter, adapter->rx_scrq[scrq_num]) &&
- napi_reschedule(napi)) {
- disable_scrq_irq(adapter, adapter->rx_scrq[scrq_num]);
- goto restart_poll;
+ if (napi_complete_done(napi, frames_processed)) {
+ enable_scrq_irq(adapter, rx_scrq);
+ if (pending_scrq(adapter, rx_scrq)) {
+ rmb();
+ if (napi_reschedule(napi)) {
+ disable_scrq_irq(adapter, rx_scrq);
+ goto restart_poll;
+ }
+ }
}
}
return frames_processed;
--
2.26.2
More information about the Linuxppc-dev
mailing list