[PATCH 06/12] powerpc/32s: Make local symbols non visible in hash_low.

[Christophe Leroy]

In hash_low.S, a lot of named local symbols are used instead of
numbers to ease code lisibility. However, they don't need to be
visible.

In order to ease blacklisting of functions running with MMU
disabled for kprobe, rename the symbols to .Lsymbols in order
to hide them as if they were numbered labels.

Signed-off-by: Christophe Leroy <christophe.leroy at c-s.fr>
---
 arch/powerpc/mm/book3s32/hash_low.S | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/mm/book3s32/hash_low.S b/arch/powerpc/mm/book3s32/hash_low.S
index 6d236080cb1a..2afa3fa2012d 100644
--- a/arch/powerpc/mm/book3s32/hash_low.S
+++ b/arch/powerpc/mm/book3s32/hash_low.S
@@ -81,7 +81,7 @@ _GLOBAL(hash_page)
 	rlwinm.	r8,r8,0,0,20		/* extract pt base address */
 #endif
 #ifdef CONFIG_SMP
-	beq-	hash_page_out		/* return if no mapping */
+	beq-	.Lhash_page_out		/* return if no mapping */
 #else
 	/* XXX it seems like the 601 will give a machine fault on the
 	   rfi if its alignment is wrong (bottom 4 bits of address are
@@ -109,11 +109,11 @@ _GLOBAL(hash_page)
 #if (PTE_FLAGS_OFFSET != 0)
 	addi	r8,r8,PTE_FLAGS_OFFSET
 #endif
-retry:
+.Lretry:
 	lwarx	r6,0,r8			/* get linux-style pte, flag word */
 	andc.	r5,r3,r6		/* check access & ~permission */
 #ifdef CONFIG_SMP
-	bne-	hash_page_out		/* return if access not permitted */
+	bne-	.Lhash_page_out		/* return if access not permitted */
 #else
 	bnelr-
 #endif
@@ -128,7 +128,7 @@ retry:
 #endif /* CONFIG_SMP */
 #endif /* CONFIG_PTE_64BIT */
 	stwcx.	r5,0,r8			/* attempt to update PTE */
-	bne-	retry			/* retry if someone got there first */
+	bne-	.Lretry			/* retry if someone got there first */
 
 	mfsrin	r3,r4			/* get segment reg for segment */
 #ifndef CONFIG_VMAP_STACK
@@ -156,7 +156,7 @@ retry:
 #endif
 
 #ifdef CONFIG_SMP
-hash_page_out:
+.Lhash_page_out:
 	eieio
 	lis	r8, (mmu_hash_lock - PAGE_OFFSET)@ha
 	li	r0,0
@@ -358,7 +358,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
 	CMPPTE	0,r6,r5
 	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_slot
+	beq+	.Lfound_slot
 
 	patch_site	0f, patch__hash_page_B
 	/* Search the secondary PTEG for a matching PTE */
@@ -370,7 +370,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 2:	LDPTEu	r6,HPTE_SIZE(r4)
 	CMPPTE	0,r6,r5
 	bdnzf	2,2b
-	beq+	found_slot
+	beq+	.Lfound_slot
 	xori	r5,r5,PTE_H		/* clear H bit again */
 
 	/* Search the primary PTEG for an empty slot */
@@ -379,7 +379,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 1:	LDPTEu	r6,HPTE_SIZE(r4)	/* get next PTE */
 	TST_V(r6)			/* test valid bit */
 	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_empty
+	beq+	.Lfound_empty
 
 	/* update counter of times that the primary PTEG is full */
 	lis	r4, (primary_pteg_full - PAGE_OFFSET)@ha
@@ -397,7 +397,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 2:	LDPTEu	r6,HPTE_SIZE(r4)
 	TST_V(r6)
 	bdnzf	2,2b
-	beq+	found_empty
+	beq+	.Lfound_empty
 	xori	r5,r5,PTE_H		/* clear H bit again */
 
 	/*
@@ -435,9 +435,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 
 #ifndef CONFIG_SMP
 	/* Store PTE in PTEG */
-found_empty:
+.Lfound_empty:
 	STPTE	r5,0(r4)
-found_slot:
+.Lfound_slot:
 	STPTE	r8,HPTE_SIZE/2(r4)
 
 #else /* CONFIG_SMP */
@@ -458,8 +458,8 @@ found_slot:
  * We do however have to make sure that the PTE is never in an invalid
  * state with the V bit set.
  */
-found_empty:
-found_slot:
+.Lfound_empty:
+.Lfound_slot:
 	CLR_V(r5,r0)		/* clear V (valid) bit in PTE */
 	STPTE	r5,0(r4)
 	sync
-- 
2.25.0