[PATCH v5 3/3] powerpc/powernv: Parse device tree, population of SPR support

Vaidyanathan Srinivasan svaidy at linux.ibm.com
Thu Mar 19 02:24:41 AEDT 2020


* Pratik Rajesh Sampat <psampat at linux.ibm.com> [2020-03-17 19:40:18]:

> Parse the device tree for nodes self-save, self-restore and populate
> support for the preferred SPRs based what was advertised by the device
> tree.
> 
> Signed-off-by: Pratik Rajesh Sampat <psampat at linux.ibm.com>
> Reviewed-by: Ram Pai <linuxram at us.ibm.com>

Reviewed-by: Vaidyanathan Srinivasan <svaidy at linux.ibm.com>

>
> ---
>  .../bindings/powerpc/opal/power-mgt.txt       | 10 +++
>  arch/powerpc/platforms/powernv/idle.c         | 78 +++++++++++++++++++
>  2 files changed, 88 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> index 9d619e955576..093cb5fe3d2d 100644
> --- a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> +++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
> @@ -116,3 +116,13 @@ otherwise. The length of all the property arrays must be the same.
>  	which of the fields of the PMICR are set in the corresponding
>  	entries in ibm,cpu-idle-state-pmicr. This is an optional
>  	property on POWER8 and is absent on POWER9.
> +
> +- self-restore:
> + Array of unsigned 64-bit values containing a property for sprn-mask
> + with each bit indicating the index of the supported SPR for the
> + functionality. This is an optional property for both Power8 and Power9
> +
> +- self-save:
> +  Array of unsigned 64-bit values containing a property for sprn-mask
> +  with each bit indicating the index of the supported SPR for the
> +  functionality. This is an optional property for both Power8 and Power9
> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> index 97aeb45e897b..c39111b338ff 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -1436,6 +1436,81 @@ static void __init pnv_probe_idle_states(void)
>  		supported_cpuidle_states |= pnv_idle_states[i].flags;
>  }
>  
> +/*
> + * Extracts and populates the self save or restore capabilities
> + * passed from the device tree node
> + */
> +static int extract_save_restore_state_dt(struct device_node *np, int type)
> +{
> +	int nr_sprns = 0, i, bitmask_index;
> +	u64 *temp_u64;
> +	u64 bit_pos;
> +
> +	nr_sprns = of_property_count_u64_elems(np, "sprn-bitmask");
> +	if (nr_sprns <= 0)
> +		return -EINVAL;
> +	temp_u64 = kcalloc(nr_sprns, sizeof(u64), GFP_KERNEL);
> +	if (of_property_read_u64_array(np, "sprn-bitmask",
> +				       temp_u64, nr_sprns)) {
> +		pr_warn("cpuidle-powernv: failed to find registers in DT\n");
> +		kfree(temp_u64);
> +		return -EINVAL;
> +	}
> +	/*
> +	 * Populate acknowledgment of support for the sprs in the global vector
> +	 * gotten by the registers supplied by the firmware.
> +	 * The registers are in a bitmask, bit index within
> +	 * that specifies the SPR
> +	 */
> +	for (i = 0; i < nr_preferred_sprs; i++) {
> +		bitmask_index = BIT_WORD(preferred_sprs[i].spr);
> +		bit_pos = BIT_MASK(preferred_sprs[i].spr);
> +		if ((temp_u64[bitmask_index] & bit_pos) == 0) {
> +			if (type == SELF_RESTORE_TYPE)
> +				preferred_sprs[i].supported_mode &=
> +					~SELF_RESTORE_STRICT;
> +			else
> +				preferred_sprs[i].supported_mode &=
> +					~SELF_SAVE_STRICT;
> +			continue;
> +		}
> +		if (type == SELF_RESTORE_TYPE) {
> +			preferred_sprs[i].supported_mode |=
> +				SELF_RESTORE_STRICT;
> +		} else {
> +			preferred_sprs[i].supported_mode |=
> +				SELF_SAVE_STRICT;
> +		}
> +	}
> +
> +	kfree(temp_u64);
> +	return 0;
> +}
> +
> +static int pnv_parse_deepstate_dt(void)
> +{
> +	struct device_node *np;
> +	int rc = 0, i;
> +
> +	/* Self restore register population */
> +	np = of_find_compatible_node(NULL, NULL, "ibm,opal-self-restore");
> +	if (np) {
> +		rc = extract_save_restore_state_dt(np, SELF_RESTORE_TYPE);
> +		if (rc != 0)
> +			return rc;
> +	}
> +	/* Self save register population */
> +	np = of_find_compatible_node(NULL, NULL, "ibm,opal-self-save");
> +	if (!np) {
> +		for (i = 0; i < nr_preferred_sprs; i++)
> +			preferred_sprs[i].supported_mode &= ~SELF_SAVE_STRICT;
> +	} else {
> +		rc = extract_save_restore_state_dt(np, SELF_SAVE_TYPE);
> +	}
> +	of_node_put(np);
> +	return rc;
> +}
> +
>  /*
>   * This function parses device-tree and populates all the information
>   * into pnv_idle_states structure. It also sets up nr_pnv_idle_states
> @@ -1584,6 +1659,9 @@ static int __init pnv_init_idle_states(void)
>  		return rc;
>  	pnv_probe_idle_states();
>  
> +	rc = pnv_parse_deepstate_dt();
> +	if (rc)
> +		return rc;
>  	if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
>  		if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
>  			power7_fastsleep_workaround_entry = false;
> -- 

Thanks Michael for the detailed review and feedback. Your review
comments have been addressed by Pratik.

--Vaidy



More information about the Linuxppc-dev mailing list