[PATCH 3/5] selftests/powerpc: Add NX-GZIP engine compress testcase
Raphael Moreira Zinsly
rzinsly at linux.ibm.com
Tue Mar 17 05:07:12 AEDT 2020
Add a compression testcase for the powerpc NX-GZIP engine.
Signed-off-by: Bulent Abali <abali at us.ibm.com>
Signed-off-by: Raphael Moreira Zinsly <rzinsly at linux.ibm.com>
---
.../selftests/powerpc/nx-gzip/Makefile | 21 +
.../selftests/powerpc/nx-gzip/gzfht_test.c | 475 ++++++++++++++++++
.../selftests/powerpc/nx-gzip/gzip_vas.c | 257 ++++++++++
3 files changed, 753 insertions(+)
create mode 100644 tools/testing/selftests/powerpc/nx-gzip/Makefile
create mode 100644 tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
create mode 100644 tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c
diff --git a/tools/testing/selftests/powerpc/nx-gzip/Makefile b/tools/testing/selftests/powerpc/nx-gzip/Makefile
new file mode 100644
index 000000000000..ab903f63bbbd
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/Makefile
@@ -0,0 +1,21 @@
+CC = gcc
+CFLAGS = -O3
+INC = ./inc
+SRC = gzfht_test.c
+OBJ = $(SRC:.c=.o)
+TESTS = gzfht_test
+EXTRA_SOURCES = gzip_vas.c
+
+all: $(TESTS)
+
+$(OBJ): %.o: %.c
+ $(CC) $(CFLAGS) -I$(INC) -c $<
+
+$(TESTS): $(OBJ)
+ $(CC) $(CFLAGS) -I$(INC) -o $@ $@.o $(EXTRA_SOURCES)
+
+run_tests: $(TESTS)
+ ./gzfht_test gzip_vas.c
+
+clean:
+ rm -f $(TESTS) *.o *~ *.gz
diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
new file mode 100644
index 000000000000..29d83fe2694f
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c
@@ -0,0 +1,475 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * P9 gzip sample code for demonstrating the P9 NX hardware interface.
+ * Not intended for productive uses or for performance or compression
+ * ratio measurements. For simplicity of demonstration, this sample
+ * code compresses in to fixed Huffman blocks only (Deflate btype=1)
+ * and has very simple memory management. Dynamic Huffman blocks
+ * (Deflate btype=2) are more involved as detailed in the user guide.
+ * Note also that /dev/crypto/gzip, VAS and skiboot support are
+ * required.
+ *
+ * Copyright 2020 IBM Corp.
+ *
+ * https://github.com/libnxz/power-gzip for zlib api and other utils
+ *
+ * Author: Bulent Abali <abali at us.ibm.com>
+ *
+ * Definitions of acronyms used here. See
+ * P9 NX Gzip Accelerator User's Manual for details
+ *
+ * adler/crc: 32 bit checksums appended to stream tail
+ * ce: completion extension
+ * cpb: coprocessor parameter block (metadata)
+ * crb: coprocessor request block (command)
+ * csb: coprocessor status block (status)
+ * dht: dynamic huffman table
+ * dde: data descriptor element (address, length)
+ * ddl: list of ddes
+ * dh/fh: dynamic and fixed huffman types
+ * fc: coprocessor function code
+ * histlen: history/dictionary length
+ * history: sliding window of up to 32KB of data
+ * lzcount: Deflate LZ symbol counts
+ * rembytecnt: remaining byte count
+ * sfbt: source final block type; last block's type during decomp
+ * spbc: source processed byte count
+ * subc: source unprocessed bit count
+ * tebc: target ending bit count; valid bits in the last byte
+ * tpbc: target processed byte count
+ * vas: virtual accelerator switch; the user mode interface
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/fcntl.h>
+#include <sys/mman.h>
+#include <endian.h>
+#include <bits/endian.h>
+#include <sys/ioctl.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include "nxu.h"
+#include "nx.h"
+
+int nx_dbg = 0;
+FILE *nx_gzip_log = NULL;
+
+extern void *nx_fault_storage_address;
+extern void *nx_function_begin(int function, int pri);
+extern int nx_function_end(void *handle);
+
+#define NX_MIN(X, Y) (((X) < (Y)) ? (X) : (Y))
+
+/*
+ * LZ counts returned in the user supplied nx_gzip_crb_cpb_t structure.
+ */
+static int compress_fht_sample(char *src, uint32_t srclen, char *dst,
+ uint32_t dstlen, int with_count,
+ nx_gzip_crb_cpb_t *cmdp, void *handle)
+{
+ int cc;
+ uint32_t fc;
+
+ assert(!!cmdp);
+
+ put32(cmdp->crb, gzip_fc, 0); /* clear */
+ fc = (with_count) ? GZIP_FC_COMPRESS_RESUME_FHT_COUNT :
+ GZIP_FC_COMPRESS_RESUME_FHT;
+ putnn(cmdp->crb, gzip_fc, fc);
+ putnn(cmdp->cpb, in_histlen, 0); /* resuming with no history */
+ memset((void *) &cmdp->crb.csb, 0, sizeof(cmdp->crb.csb));
+
+ /* Section 6.6 programming notes; spbc may be in two different
+ * places depending on FC.
+ */
+ if (!with_count)
+ put32(cmdp->cpb, out_spbc_comp, 0);
+ else
+ put32(cmdp->cpb, out_spbc_comp_with_count, 0);
+
+ /* Figure 6-3 6-4; CSB location */
+ put64(cmdp->crb, csb_address, 0);
+ put64(cmdp->crb, csb_address,
+ (uint64_t) &cmdp->crb.csb & csb_address_mask);
+
+ /* Source direct dde (scatter-gather list) */
+ clear_dde(cmdp->crb.source_dde);
+ putnn(cmdp->crb.source_dde, dde_count, 0);
+ put32(cmdp->crb.source_dde, ddebc, srclen);
+ put64(cmdp->crb.source_dde, ddead, (uint64_t) src);
+
+ /* Target direct dde (scatter-gather list) */
+ clear_dde(cmdp->crb.target_dde);
+ putnn(cmdp->crb.target_dde, dde_count, 0);
+ put32(cmdp->crb.target_dde, ddebc, dstlen);
+ put64(cmdp->crb.target_dde, ddead, (uint64_t) dst);
+
+ /* Submit the crb, the job descriptor, to the accelerator */
+ nxu_run_job(cmdp, handle);
+
+ /* Poll for the csb.v bit; you should also consider sleeping
+ * or interrupts.
+ */
+ do { ; } while (getnn(cmdp->crb.csb, csb_v) == 0);
+
+ /* CC Table 6-8 */
+ cc = getnn(cmdp->crb.csb, csb_cc);
+
+ return cc;
+}
+
+/*
+ * Prepares a blank no filename no timestamp gzip header and returns
+ * the number of bytes written to buf.
+ * Gzip specification at https://tools.ietf.org/html/rfc1952
+ */
+int gzip_header_blank(char *buf)
+{
+ int i = 0;
+ buf[i++] = 0x1f; /* ID1 */
+ buf[i++] = 0x8b; /* ID2 */
+ buf[i++] = 0x08; /* CM */
+ buf[i++] = 0x00; /* FLG */
+ buf[i++] = 0x00; /* MTIME */
+ buf[i++] = 0x00; /* MTIME */
+ buf[i++] = 0x00; /* MTIME */
+ buf[i++] = 0x00; /* MTIME */
+ buf[i++] = 0x04; /* XFL 4=fastest */
+ buf[i++] = 0x03; /* OS UNIX */
+ return i;
+}
+
+/* Caller must free the allocated buffer return nonzero on error. */
+int read_alloc_input_file(char *fname, char **buf, size_t *bufsize)
+{
+ struct stat statbuf;
+ FILE *fp;
+ char *p;
+ size_t num_bytes;
+ if (stat(fname, &statbuf)) {
+ perror(fname);
+ return(-1);
+ }
+ if (NULL == (fp = fopen(fname, "r"))) {
+ perror(fname);
+ return(-1);
+ }
+ assert(NULL != (p = (char *) malloc(statbuf.st_size)));
+ num_bytes = fread(p, 1, statbuf.st_size, fp);
+ if (ferror(fp) || (num_bytes != statbuf.st_size)) {
+ perror(fname);
+ return(-1);
+ }
+ *buf = p;
+ *bufsize = num_bytes;
+ return 0;
+}
+
+/* Returns nonzero on error */
+int write_output_file(char *fname, char *buf, size_t bufsize)
+{
+ FILE *fp;
+ size_t num_bytes;
+ if (NULL == (fp = fopen(fname, "w"))) {
+ perror(fname);
+ return(-1);
+ }
+ num_bytes = fwrite(buf, 1, bufsize, fp);
+ if (ferror(fp) || (num_bytes != bufsize)) {
+ perror(fname);
+ return(-1);
+ }
+ fclose(fp);
+ return 0;
+}
+
+/*
+ * Z_SYNC_FLUSH as described in zlib.h.
+ * Returns number of appended bytes
+ */
+int append_sync_flush(char *buf, int tebc, int final)
+{
+ uint64_t flush;
+ int shift = (tebc & 0x7);
+ if (tebc > 0) {
+ /* Last byte is partially full */
+ buf = buf - 1;
+ *buf = *buf & (unsigned char) ((1<<tebc)-1);
+ } else
+ *buf = 0;
+ flush = ((0x1ULL & final) << shift) | *buf;
+ shift = shift + 3; /* BFINAL and BTYPE written */
+ shift = (shift <= 8) ? 8 : 16;
+ flush |= (0xFFFF0000ULL) << shift; /* Zero length block */
+ shift = shift + 32;
+ while (shift > 0) {
+ *buf++ = (unsigned char) (flush & 0xffULL);
+ flush = flush >> 8;
+ shift = shift - 8;
+ }
+ return(((tebc > 5) || (tebc == 0)) ? 5 : 4);
+}
+
+/*
+ * Fault in pages prior to NX job submission. wr=1 may be required to
+ * touch writeable pages. System zero pages do not fault-in the page as
+ * intended. Typically set wr=1 for NX target pages and set wr=0 for NX
+ * source pages.
+ */
+static int nx_touch_pages(void *buf, long buf_len, long page_len, int wr)
+{
+ char *begin = buf;
+ char *end = (char *) buf + buf_len - 1;
+ volatile char t;
+
+ assert(buf_len >= 0 && !!buf);
+
+ NXPRT(fprintf(stderr, "touch %p %p len 0x%lx wr=%d\n", buf,
+ (buf + buf_len), buf_len, wr));
+
+ if (buf_len <= 0 || buf == NULL)
+ return -1;
+
+ do {
+ t = *begin;
+ if (wr)
+ *begin = t;
+ begin = begin + page_len;
+ } while (begin < end);
+
+ /* When buf_sz is small or buf tail is in another page */
+ t = *end;
+ if (wr)
+ *end = t;
+
+ return 0;
+}
+
+/*
+ * Final deflate block bit. This call assumes the block
+ * beginning is byte aligned.
+ */
+static void set_bfinal(void *buf, int bfinal)
+{
+ char *b = buf;
+ if (bfinal)
+ *b = *b | (unsigned char) 0x01;
+ else
+ *b = *b & (unsigned char) 0xfe;
+}
+
+int compress_file(int argc, char **argv, void *handle)
+{
+ char *inbuf, *outbuf, *srcbuf, *dstbuf;
+ char outname[1024];
+ uint32_t srclen, dstlen;
+ uint32_t flushlen, chunk;
+ size_t inlen, outlen, dsttotlen, srctotlen;
+ uint32_t crc, spbc, tpbc, tebc;
+ int lzcounts = 0;
+ int cc;
+ int num_hdr_bytes;
+ nx_gzip_crb_cpb_t *cmdp;
+ uint32_t pagelen = 65536;
+ int fault_tries = 50;
+
+ cmdp = (void *)(uintptr_t) aligned_alloc(sizeof(nx_gzip_crb_t),
+ sizeof(nx_gzip_crb_cpb_t));
+
+ if (argc != 2) {
+ fprintf(stderr, "usage: %s <fname>\n", argv[0]);
+ exit(-1);
+ }
+ if (read_alloc_input_file(argv[1], &inbuf, &inlen))
+ exit(-1);
+ fprintf(stderr, "file %s read, %ld bytes\n", argv[1], inlen);
+
+ /* Generous output buffer for header/trailer */
+ outlen = 2 * inlen + 1024;
+
+ assert(NULL != (outbuf = (char *)malloc(outlen)));
+ nx_touch_pages(outbuf, outlen, pagelen, 1);
+
+ /* Compress piecemeal in smallish chunks */
+ chunk = 1<<22;
+
+ /* Write the gzip header to the stream */
+ num_hdr_bytes = gzip_header_blank(outbuf);
+ dstbuf = outbuf + num_hdr_bytes;
+ outlen = outlen - num_hdr_bytes;
+ dsttotlen = num_hdr_bytes;
+
+ srcbuf = inbuf;
+ srctotlen = 0;
+
+ /* Init the CRB, the coprocessor request block */
+ memset(&cmdp->crb, 0, sizeof(cmdp->crb));
+
+ /* Initial gzip crc32 */
+ put32(cmdp->cpb, in_crc, 0);
+
+ fault_tries = 50;
+
+ while (inlen > 0) {
+
+ /* Submit chunk size source data per job */
+ srclen = NX_MIN(chunk, inlen);
+ /* Supply large target in case data expands */
+ dstlen = NX_MIN(2*srclen, outlen);
+
+ /* Page faults are handled by the user code */
+
+ /* Fault-in pages; an improved code wouldn't touch so
+ * many pages but would try to estimate the
+ * compression ratio and adjust both the src and dst
+ * touch amounts.
+ */
+ nx_touch_pages(cmdp, sizeof(nx_gzip_crb_cpb_t), pagelen, 1);
+ nx_touch_pages(srcbuf, srclen, pagelen, 0);
+ nx_touch_pages(dstbuf, dstlen, pagelen, 1);
+
+ cc = compress_fht_sample(
+ srcbuf, srclen,
+ dstbuf, dstlen,
+ lzcounts, cmdp, handle);
+
+ if (cc != ERR_NX_OK && cc != ERR_NX_TPBC_GT_SPBC &&
+ cc != ERR_NX_TRANSLATION) {
+ fprintf(stderr, "nx error: cc= %d\n", cc);
+ exit(-1);
+ }
+
+ /* Page faults are handled by the user code */
+ if (cc == ERR_NX_TRANSLATION) {
+ volatile char touch = *(char *)cmdp->crb.csb.fsaddr;
+ NXPRT(fprintf(stderr, "page fault: cc= %d, try= %d, \
+ fsa= %08llx\n", cc, fault_tries,
+ (unsigned long long) cmdp->crb.csb.fsaddr));
+
+ fault_tries--;
+ if (fault_tries > 0) {
+ continue;
+ } else {
+ fprintf(stderr, "error: \
+ cannot progress; too many faults\n");
+ exit(-1);
+ };
+ }
+
+ fault_tries = 50; /* Reset for the next chunk */
+
+ inlen = inlen - srclen;
+ srcbuf = srcbuf + srclen;
+ srctotlen = srctotlen + srclen;
+
+ /* Two possible locations for spbc depending on the function
+ * code.
+ */
+ spbc = (!lzcounts) ? get32(cmdp->cpb, out_spbc_comp) :
+ get32(cmdp->cpb, out_spbc_comp_with_count);
+ assert(spbc == srclen);
+
+ /* Target byte count */
+ tpbc = get32(cmdp->crb.csb, tpbc);
+ /* Target ending bit count */
+ tebc = getnn(cmdp->cpb, out_tebc);
+ NXPRT(fprintf(stderr, "compressed chunk %d to %d bytes, \
+ tebc= %d\n", spbc, tpbc, tebc));
+
+ if (inlen > 0) { /* More chunks to go */
+ set_bfinal(dstbuf, 0);
+ dstbuf = dstbuf + tpbc;
+ dsttotlen = dsttotlen + tpbc;
+ outlen = outlen - tpbc;
+ /* Round up to the next byte with a flush
+ * block; do not set the BFINAqL bit.
+ */
+ flushlen = append_sync_flush(dstbuf, tebc, 0);
+ dsttotlen = dsttotlen + flushlen;
+ outlen = outlen - flushlen;
+ dstbuf = dstbuf + flushlen;
+ NXPRT(fprintf(stderr, "added deflate sync_flush %d \
+ bytes\n", flushlen));
+ } else { /* Done */
+ /* Set the BFINAL bit of the last block per Deflate
+ * specification.
+ */
+ set_bfinal(dstbuf, 1);
+ dstbuf = dstbuf + tpbc;
+ dsttotlen = dsttotlen + tpbc;
+ outlen = outlen - tpbc;
+ }
+
+ /* Resuming crc32 for the next chunk */
+ crc = get32(cmdp->cpb, out_crc);
+ put32(cmdp->cpb, in_crc, crc);
+ crc = be32toh(crc);
+ }
+
+ /* Append crc32 and ISIZE to the end */
+ memcpy(dstbuf, &crc, 4);
+ memcpy(dstbuf+4, &srctotlen, 4);
+ dsttotlen = dsttotlen + 8;
+ outlen = outlen - 8;
+
+ strcpy(outname, argv[1]);
+ strcat(outname, ".nx.gz");
+ if (write_output_file(outname, outbuf, dsttotlen)) {
+ fprintf(stderr, "write error: %s\n", outname);
+ exit(-1);
+ }
+
+ fprintf(stderr, "compressed %ld to %ld bytes total, \
+ crc32 checksum = %08x\n", srctotlen, dsttotlen, crc);
+
+ if (inbuf != NULL)
+ free(inbuf);
+
+ if (outbuf != NULL)
+ free(outbuf);
+
+ return 0;
+}
+
+void sigsegv_handler(int sig, siginfo_t *info, void *ctx)
+{
+ fprintf(stderr, "%d: Got signal %d si_code %d, si_addr %p\n", getpid(),
+ sig, info->si_code, info->si_addr);
+
+ nx_fault_storage_address = info->si_addr;
+}
+
+int main(int argc, char **argv)
+{
+ int rc;
+ struct sigaction act;
+ void *handle;
+
+ act.sa_handler = 0;
+ act.sa_sigaction = sigsegv_handler;
+ act.sa_flags = SA_SIGINFO;
+ act.sa_restorer = 0;
+ sigemptyset(&act.sa_mask);
+ sigaction(SIGSEGV, &act, NULL);
+
+ handle = nx_function_begin(NX_FUNC_COMP_GZIP, 0);
+ if (!handle) {
+ fprintf(stderr, "Unable to init NX, errno %d\n", errno);
+ exit(-1);
+ }
+
+ rc = compress_file(argc, argv, handle);
+
+ nx_function_end(handle);
+
+ return rc;
+}
diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c b/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c
new file mode 100644
index 000000000000..6408d7c0b8ac
--- /dev/null
+++ b/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c
@@ -0,0 +1,257 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Copyright 2020 IBM Corp.
+ *
+ * Author: Bulent Abali <abali at us.ibm.com>
+ *
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/time.h>
+#include <sys/fcntl.h>
+#include <sys/mman.h>
+#include <endian.h>
+#include <bits/endian.h>
+#include <sys/ioctl.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include "nx-gzip.h"
+#include "nx.h"
+#include "copy-paste.h"
+#include "nxu.h"
+#include "nx_dbg.h"
+#include <sys/platform/ppc.h>
+
+#define barrier()
+#define hwsync() asm volatile("hwsync" ::: "memory")
+
+#ifndef NX_NO_CPU_PRI
+#define cpu_pri_default() asm volatile ("or 2, 2, 2")
+#define cpu_pri_low() asm volatile ("or 31, 31, 31")
+#else
+#define cpu_pri_default() do { ; } while (0)
+#define cpu_pri_low() do { ; } while (0)
+#endif
+
+void *nx_fault_storage_address;
+uint64_t dbgtimer = 0;
+
+struct nx_handle {
+ int fd;
+ int function;
+ void *paste_addr;
+};
+
+static int open_device_nodes(char *devname, int pri, struct nx_handle *handle)
+{
+ int rc, fd;
+ void *addr;
+ struct vas_gzip_setup_attr txattr;
+
+ fd = open(devname, O_RDWR);
+ if (fd < 0) {
+ fprintf(stderr, " open device name %s\n", devname);
+ return -errno;
+ }
+
+ memset(&txattr, 0, sizeof(txattr));
+ txattr.version = 1;
+ txattr.vas_id = pri;
+ rc = ioctl(fd, VAS_GZIP_TX_WIN_OPEN, (unsigned long)&txattr);
+ if (rc < 0) {
+ fprintf(stderr, "ioctl() n %d, error %d\n", rc, errno);
+ rc = -errno;
+ goto out;
+ }
+
+ addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0ULL);
+ if (addr == MAP_FAILED) {
+ fprintf(stderr, "mmap() failed, errno %d\n", errno);
+ rc = -errno;
+ goto out;
+ }
+ handle->fd = fd;
+ handle->paste_addr = (void *)((char *)addr + 0x400);
+
+ rc = 0;
+out:
+ close(fd);
+ return rc;
+}
+
+void *nx_function_begin(int function, int pri)
+{
+ int rc;
+ char *devname = "/dev/crypto/nx-gzip";
+ struct nx_handle *nxhandle;
+
+ if (function != NX_FUNC_COMP_GZIP) {
+ errno = EINVAL;
+ fprintf(stderr, " NX_FUNC_COMP_GZIP not found\n");
+ return NULL;
+ }
+
+
+ nxhandle = malloc(sizeof(*nxhandle));
+ if (!nxhandle) {
+ errno = ENOMEM;
+ fprintf(stderr, " No memory\n");
+ return NULL;
+ }
+
+ nxhandle->function = function;
+ rc = open_device_nodes(devname, pri, nxhandle);
+ if (rc < 0) {
+ errno = -rc;
+ fprintf(stderr, " open_device_nodes failed\n");
+ return NULL;
+ }
+
+ return nxhandle;
+}
+
+int nx_function_end(void *handle)
+{
+ int rc = 0;
+ struct nx_handle *nxhandle = handle;
+
+ rc = munmap(nxhandle->paste_addr - 0x400, 4096);
+ if (rc < 0) {
+ fprintf(stderr, "munmap() failed, errno %d\n", errno);
+ return rc;
+ }
+ close(nxhandle->fd);
+ free(nxhandle);
+
+ return rc;
+}
+
+static int nx_wait_for_csb(nx_gzip_crb_cpb_t *cmdp)
+{
+ volatile long poll = 0;
+ uint64_t t;
+
+ /* Save power and let other threads use the h/w. top may show
+ * 100% but only because OS doesn't know we slowed the this
+ * h/w thread while polling. We're letting other threads have
+ * higher throughput on the core.
+ */
+ cpu_pri_low();
+
+#define CSB_MAX_POLL 200000000UL
+#define USLEEP_TH 300000UL
+
+ t = __ppc_get_timebase();
+
+ while (getnn(cmdp->crb.csb, csb_v) == 0) {
+ ++poll;
+ hwsync();
+
+ cpu_pri_low();
+
+ /* usleep(0) takes around 29000 ticks ~60 us.
+ * 300000 is spinning for about 600 us then
+ * start sleeping.
+ */
+ if ((__ppc_get_timebase() - t) > USLEEP_TH) {
+ cpu_pri_default();
+ usleep(1);
+ }
+
+ if (poll > CSB_MAX_POLL)
+ break;
+
+ /* Fault address from signal handler */
+ if (nx_fault_storage_address) {
+ cpu_pri_default();
+ return -EAGAIN;
+ }
+
+ }
+
+ cpu_pri_default();
+
+ /* hw has updated csb and output buffer */
+ hwsync();
+
+ /* Check CSB flags. */
+ if (getnn(cmdp->crb.csb, csb_v) == 0) {
+ fprintf(stderr, "CSB still not valid after %d polls, \
+ giving up", (int) poll);
+ prt_err("CSB still not valid after %d polls, giving up.\n",
+ (int) poll);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+int nxu_run_job(nx_gzip_crb_cpb_t *cmdp, void *handle)
+{
+ int i, ret, retries;
+ struct nx_handle *nxhandle = handle;
+
+ assert(handle != NULL);
+ i = 0;
+ retries = 5000;
+ while (i++ < retries) {
+ hwsync();
+ vas_copy(&cmdp->crb, 0);
+ ret = vas_paste(nxhandle->paste_addr, 0);
+ hwsync();
+
+ NXPRT(fprintf(stderr, "Paste attempt %d/%d returns 0x%x\n",
+ i, retries, ret));
+
+ if ((ret == 2) || (ret == 3)) {
+
+ ret = nx_wait_for_csb(cmdp);
+ if (!ret) {
+ goto out;
+ } else if (ret == -EAGAIN) {
+ volatile long x;
+ prt_err("Touching address %p, 0x%lx\n",
+ nx_fault_storage_address,
+ *(long *) nx_fault_storage_address);
+ x = *(long *) nx_fault_storage_address;
+ *(long *) nx_fault_storage_address = x;
+ nx_fault_storage_address = 0;
+ continue;
+ } else {
+ prt_err("wait_for_csb() returns %d\n", ret);
+ break;
+ }
+ } else {
+ if (i < 10) {
+ /* spin for few ticks */
+#define SPIN_TH 500UL
+ uint64_t fail_spin;
+ fail_spin = __ppc_get_timebase();
+ while ((__ppc_get_timebase() - fail_spin) <
+ SPIN_TH)
+ { ; }
+ } else {
+ /* sleep */
+ static unsigned int pr = 0;
+ if (pr++ % 100 == 0) {
+ prt_err("Paste attempt %d/%d, \
+ failed pid= %d\n", i, retries,
+ getpid());
+ }
+ usleep(1);
+ }
+ continue;
+ }
+ }
+
+out:
+ cpu_pri_default();
+
+ return ret;
+}
--
2.21.0
More information about the Linuxppc-dev
mailing list