[PATCH 04/11] ppc64/kexec_file: avoid stomping memory used by special regions
piliu
piliu at redhat.com
Sun Jun 28 12:14:43 AEST 2020
Hi Hari,
After a quick through for this series, I have a few question/comment on
this patch for the time being. Pls see comment inline.
On 06/27/2020 03:05 AM, Hari Bathini wrote:
> crashkernel region could have an overlap with special memory regions
> like opal, rtas, tce-table & such. These regions are referred to as
> exclude memory ranges. Setup this ranges during image probe in order
> to avoid them while finding the buffer for different kdump segments.
> Implement kexec_locate_mem_hole_ppc64() that locates a memory hole
> accounting for these ranges. Also, override arch_kexec_add_buffer()
> to locate a memory hole & later call __kexec_add_buffer() function
> with kbuf->mem set to skip the generic locate memory hole lookup.
>
> Signed-off-by: Hari Bathini <hbathini at linux.ibm.com>
> ---
> arch/powerpc/include/asm/crashdump-ppc64.h | 10 +
> arch/powerpc/include/asm/kexec.h | 7 -
> arch/powerpc/kexec/elf_64.c | 7 +
> arch/powerpc/kexec/file_load_64.c | 292 ++++++++++++++++++++++++++++
> 4 files changed, 312 insertions(+), 4 deletions(-)
> create mode 100644 arch/powerpc/include/asm/crashdump-ppc64.h
>
> diff --git a/arch/powerpc/include/asm/crashdump-ppc64.h b/arch/powerpc/include/asm/crashdump-ppc64.h
> new file mode 100644
> index 0000000..3596c25
> --- /dev/null
> +++ b/arch/powerpc/include/asm/crashdump-ppc64.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +#ifndef _ARCH_POWERPC_KEXEC_CRASHDUMP_PPC64_H
> +#define _ARCH_POWERPC_KEXEC_CRASHDUMP_PPC64_H
> +
> +/* min & max addresses for kdump load segments */
> +#define KDUMP_BUF_MIN (crashk_res.start)
> +#define KDUMP_BUF_MAX ((crashk_res.end < ppc64_rma_size) ? \
> + crashk_res.end : (ppc64_rma_size - 1))
> +
> +#endif /* __ARCH_POWERPC_KEXEC_CRASHDUMP_PPC64_H */
> diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
> index 7008ea1..bf47a01 100644
> --- a/arch/powerpc/include/asm/kexec.h
> +++ b/arch/powerpc/include/asm/kexec.h
> @@ -100,14 +100,16 @@ void relocate_new_kernel(unsigned long indirection_page, unsigned long reboot_co
> #ifdef CONFIG_KEXEC_FILE
> extern const struct kexec_file_ops kexec_elf64_ops;
>
> -#ifdef CONFIG_IMA_KEXEC
> #define ARCH_HAS_KIMAGE_ARCH
>
> struct kimage_arch {
> + struct crash_mem *exclude_ranges;
> +
> +#ifdef CONFIG_IMA_KEXEC
> phys_addr_t ima_buffer_addr;
> size_t ima_buffer_size;
> -};
> #endif
> +};
>
> int setup_purgatory(struct kimage *image, const void *slave_code,
> const void *fdt, unsigned long kernel_load_addr,
> @@ -125,6 +127,7 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
> unsigned long initrd_load_addr,
> unsigned long initrd_len, const char *cmdline);
> #endif /* CONFIG_PPC64 */
> +
> #endif /* CONFIG_KEXEC_FILE */
>
> #else /* !CONFIG_KEXEC_CORE */
> diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
> index 23ad04c..c695f94 100644
> --- a/arch/powerpc/kexec/elf_64.c
> +++ b/arch/powerpc/kexec/elf_64.c
> @@ -22,6 +22,7 @@
> #include <linux/of_fdt.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> +#include <asm/crashdump-ppc64.h>
>
> static void *elf64_load(struct kimage *image, char *kernel_buf,
> unsigned long kernel_len, char *initrd,
> @@ -46,6 +47,12 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
> if (ret)
> goto out;
>
> + if (image->type == KEXEC_TYPE_CRASH) {
> + /* min & max buffer values for kdump case */
> + kbuf.buf_min = pbuf.buf_min = KDUMP_BUF_MIN;
> + kbuf.buf_max = pbuf.buf_max = KDUMP_BUF_MAX;
> + }
> +
> ret = kexec_elf_load(image, &ehdr, &elf_info, &kbuf, &kernel_load_addr);
> if (ret)
> goto out;
> diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
> index e6bff960..f1d7160 100644
> --- a/arch/powerpc/kexec/file_load_64.c
> +++ b/arch/powerpc/kexec/file_load_64.c
> @@ -17,6 +17,8 @@
> #include <linux/kexec.h>
> #include <linux/of_fdt.h>
> #include <linux/libfdt.h>
> +#include <asm/kexec_ranges.h>
> +#include <asm/crashdump-ppc64.h>
>
> const struct kexec_file_ops * const kexec_file_loaders[] = {
> &kexec_elf64_ops,
> @@ -24,6 +26,247 @@ const struct kexec_file_ops * const kexec_file_loaders[] = {
> };
>
> /**
> + * get_exclude_memory_ranges - Get exclude memory ranges. This list includes
> + * regions like opal/rtas, tce-table, initrd,
> + * kernel, htab which should be avoided while
> + * setting up kexec load segments.
> + * @mem_ranges: Range list to add the memory ranges to.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int get_exclude_memory_ranges(struct crash_mem **mem_ranges)
Is it needed? See the comment below.
> +{
> + int ret;
> +
> + ret = add_tce_mem_ranges(mem_ranges);
> + if (ret)
> + goto out;
> +
> + ret = add_initrd_mem_range(mem_ranges);
> + if (ret)
> + goto out;
> +
> + ret = add_htab_mem_range(mem_ranges);
> + if (ret)
> + goto out;
> +
> + ret = add_kernel_mem_range(mem_ranges);
> + if (ret)
> + goto out;
> +
> + ret = add_rtas_mem_range(mem_ranges, false);
> + if (ret)
> + goto out;
> +
> + ret = add_opal_mem_range(mem_ranges, false);
> + if (ret)
> + goto out;
> +
> + ret = add_reserved_ranges(mem_ranges);
> + if (ret)
> + goto out;
> +
> + /* exclude memory ranges should be sorted for easy lookup */
> + sort_memory_ranges(*mem_ranges);
> +out:
> + if (ret)
> + pr_err("Failed to setup exclude memory ranges\n");
> + return ret;
> +}
> +
> +/**
> + * __locate_mem_hole_ppc64 - Tests if the memory hole between buf_min & buf_max
> + * is large enough for the buffer. If true, sets
> + * kbuf->mem to the buffer.
> + * @kbuf: Buffer contents and memory parameters.
> + * @buf_min: Minimum address for the buffer.
> + * @buf_max: Maximum address for the buffer.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int __locate_mem_hole_ppc64(struct kexec_buf *kbuf,
> + u64 buf_min, u64 buf_max)
> +{
> + int ret = -EADDRNOTAVAIL;
> +
> + buf_min = ALIGN(buf_min, kbuf->buf_align);
> +
> + if (buf_min < buf_max &&
> + (buf_max - buf_min + 1) >= kbuf->memsz) {
> + /*
> + * Suitable memory range found. Set kbuf->mem here to skip
> + * locate memory hole routine in __kexec_add_buffer() call.
> + */
> + ret = 0;
> + if (kbuf->top_down)
> + kbuf->mem = ALIGN_DOWN(buf_max - kbuf->memsz + 1,
> + kbuf->buf_align);
> + else
> + kbuf->mem = buf_min;
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * locate_mem_hole_top_down_ppc64 - Skip special memory regions to find a
> + * suitable buffer with top down approach.
> + * @kbuf: Buffer contents and memory parameters.
> + * @buf_min: Minimum address for the buffer.
> + * @buf_max: Maximum address for the buffer.
> + * @emem: Exclude memory ranges.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int locate_mem_hole_top_down_ppc64(struct kexec_buf *kbuf,
> + u64 buf_min, u64 buf_max,
> + const struct crash_mem *emem)
> +{
> + int i, ret = 0, err = -EADDRNOTAVAIL;
> + u64 start, end, tmin, tmax;
> +
> + tmax = buf_max;
> + for (i = (emem->nr_ranges - 1); i >= 0; i--) {
> + start = emem->ranges[i].start;
> + end = emem->ranges[i].end;
> +
> + if (start > tmax)
> + continue;
> +
> + if (end < tmax) {
> + tmin = (end < buf_min ? buf_min : end + 1);
> + ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
> + if (!ret)
> + return 0;
> + }
> +
> + tmax = start - 1;
> +
> + if (tmax < buf_min) {
> + ret = err;
> + break;
> + }
> + ret = 0;
> + }
> +
> + if (!ret) {
> + tmin = buf_min;
> + ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
> + }
> + return ret;
> +}
> +
> +/**
> + * locate_mem_hole_bottom_up_ppc64 - Skip special memory regions to find a
> + * suitable buffer with bottom up approach.
> + * @kbuf: Buffer contents and memory parameters.
> + * @buf_min: Minimum address for the buffer.
> + * @buf_max: Maximum address for the buffer.
> + * @emem: Exclude memory ranges.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int locate_mem_hole_bottom_up_ppc64(struct kexec_buf *kbuf,
> + u64 buf_min, u64 buf_max,
> + const struct crash_mem *emem)
> +{
> + int i, ret = 0, err = -EADDRNOTAVAIL;
> + u64 start, end, tmin, tmax;
> +
> + tmin = buf_min;
> + for (i = 0; i < emem->nr_ranges; i++) {
> + start = emem->ranges[i].start;
> + end = emem->ranges[i].end;
> +
> + if (end < tmin)
> + continue;
> +
> + if (start > tmin) {
> + tmax = (start > buf_max ? buf_max : start - 1);
> + ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
> + if (!ret)
> + return 0;
> + }
> +
> + tmin = end + 1;
> +
> + if (tmin > buf_max) {
> + ret = err;
> + break;
> + }
> + ret = 0;
> + }
> +
> + if (!ret) {
> + tmax = buf_max;
> + ret = __locate_mem_hole_ppc64(kbuf, tmin, tmax);
> + }
> + return ret;
> +}
> +
> +/**
> + * kexec_locate_mem_hole_ppc64 - Skip special memory regions like rtas,
> + * tce-table, opal, reserved-ranges & such
> + * (exclude memory ranges) as they can't be
> + * used for kexec segment buffer. Use buf_min
> + * & buf_max fields in kexec_buf structure to
> + * skip regions. Sets kbuf->mem when a
> + * suitable memory hole is found.
> + * @kbuf: Buffer contents and memory parameters.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int kexec_locate_mem_hole_ppc64(struct kexec_buf *kbuf)
> +{
> + struct crash_mem **emem;
> + u64 buf_min, buf_max;
> + int ret;
> +
> + /*
> + * Use the locate_mem_hole logic in kexec_add_buffer() for regular
> + * kexec_file_load syscall
> + */
> + if (kbuf->image->type != KEXEC_TYPE_CRASH)
> + return 0;
Can the ranges overlap [crashk_res.start, crashk_res.end]? Otherwise
there is no requirement for @exclude_ranges.
I guess you have a design for future. If not true, then it is better to
fold the condition "if (kbuf->image->type != KEXEC_TYPE_CRASH)" into the
caller and rename this function to better distinguish use cases between
kexec and kdump
Thanks,
Pingfan
> +
> + /* Look up the exclude ranges list while locating the memory hole */
> + emem = &(kbuf->image->arch.exclude_ranges);
> + if (!(*emem) || ((*emem)->nr_ranges == 0)) {
> + pr_warn("No exclude range list. Using the default locate mem hole method\n");
> + return 0;
> + }
> +
> + /* Ensure minimum alignment needed for segments. */
> + kbuf->memsz = ALIGN(kbuf->memsz, PAGE_SIZE);
> + kbuf->buf_align = max(kbuf->buf_align, PAGE_SIZE);
> +
> + /* Segments for kdump kernel should be within crashkernel region */
> + buf_min = (kbuf->buf_min < crashk_res.start ?
> + crashk_res.start : kbuf->buf_min);
> + buf_max = (kbuf->buf_max > crashk_res.end ?
> + crashk_res.end : kbuf->buf_max);
> +
> + if (buf_min > buf_max) {
> + pr_err("Invalid buffer min and/or max values\n");
> + return -EINVAL;
> + }
> +
> + if (kbuf->top_down)
> + ret = locate_mem_hole_top_down_ppc64(kbuf, buf_min, buf_max,
> + *emem);
> + else
> + ret = locate_mem_hole_bottom_up_ppc64(kbuf, buf_min, buf_max,
> + *emem);
> +
> + /* Add the buffer allocated to the exclude list for the next lookup */
> + if (!ret) {
> + add_mem_range(emem, kbuf->mem, kbuf->memsz);
> + sort_memory_ranges(*emem);
> + }
> + return ret;
> +}
> +
> +/**
> * setup_purgatory_ppc64 - initialize PPC64 specific purgatory's global
> * variables and call setup_purgatory() to initialize
> * common global variable.
> @@ -89,6 +332,29 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
> }
>
> /**
> + * arch_kexec_add_buffer - Locate memory hole before calling kexec_add_buffer().
> + * All kexec_add_buffer() callers should use this
> + * function instead.
> + * @kbuf: Buffer contents and memory parameters.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +int arch_kexec_add_buffer(struct kexec_buf *kbuf)
> +{
> + int ret;
> +
> + ret = kexec_locate_mem_hole_ppc64(kbuf);
> + if (ret)
> + goto out;
> +
> + ret = __kexec_add_buffer(kbuf);
> +out:
> + if (ret)
> + pr_err("Failed to add buffer of size %lu\n", kbuf->memsz);
> + return ret;
> +}
> +
> +/**
> * arch_kexec_kernel_image_probe - Does additional handling needed to setup
> * kexec segments.
> * @image: kexec image being loaded.
> @@ -100,9 +366,31 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
> int arch_kexec_kernel_image_probe(struct kimage *image, void *buf,
> unsigned long buf_len)
> {
> - /* We don't support crash kernels yet. */
> - if (image->type == KEXEC_TYPE_CRASH)
> + if (image->type == KEXEC_TYPE_CRASH) {
> + int ret;
> +
> + /* Get exclude memory ranges needed for setting up kdump segments */
> + ret = get_exclude_memory_ranges(&(image->arch.exclude_ranges));
> + if (ret)
> + pr_err("Failed to setup exclude memory ranges for buffer lookup\n");
> + /* Return this until all changes for panic kernel are in */
> return -EOPNOTSUPP;
> + }
>
> return kexec_image_probe_default(image, buf, buf_len);
> }
> +
> +/**
> + * arch_kimage_file_post_load_cleanup - Frees up all the allocations done
> + * while loading the image.
> + * @image: kexec image being loaded.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +int arch_kimage_file_post_load_cleanup(struct kimage *image)
> +{
> + kfree(image->arch.exclude_ranges);
> + image->arch.exclude_ranges = NULL;
> +
> + return kexec_image_post_load_cleanup_default(image);
> +}
>
>
> _______________________________________________
> kexec mailing list
> kexec at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
>
More information about the Linuxppc-dev
mailing list