[PATCH v2 2/2] cpufreq: Specify default governor on command line
Rafael J. Wysocki
rafael at kernel.org
Wed Jun 24 22:51:04 AEST 2020
On Wed, Jun 24, 2020 at 7:50 AM Viresh Kumar <viresh.kumar at linaro.org> wrote:
>
> On 23-06-20, 15:21, Quentin Perret wrote:
> > Currently, the only way to specify the default CPUfreq governor is via
> > Kconfig options, which suits users who can build the kernel themselves
> > perfectly.
> >
> > However, for those who use a distro-like kernel (such as Android, with
> > the Generic Kernel Image project), the only way to use a different
> > default is to boot to userspace, and to then switch using the sysfs
> > interface. Being able to specify the default governor on the command
> > line, like is the case for cpuidle, would enable those users to specify
> > their governor of choice earlier on, and to simplify slighlty the
> > userspace boot procedure.
> >
> > To support this use-case, add a kernel command line parameter enabling
> > to specify a default governor for CPUfreq, which takes precedence over
> > the builtin default.
> >
> > This implementation has one notable limitation: the default governor
> > must be registered before the driver. This is solved for builtin
> > governors and drivers using appropriate *_initcall() functions. And in
> > the modular case, this must be reflected as a constraint on the module
> > loading order.
> >
> > Signed-off-by: Quentin Perret <qperret at google.com>
> > ---
> > .../admin-guide/kernel-parameters.txt | 5 ++++
> > Documentation/admin-guide/pm/cpufreq.rst | 6 ++---
> > drivers/cpufreq/cpufreq.c | 23 +++++++++++++++----
> > 3 files changed, 26 insertions(+), 8 deletions(-)
> >
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > index fb95fad81c79..5fd3c9f187eb 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -703,6 +703,11 @@
> > cpufreq.off=1 [CPU_FREQ]
> > disable the cpufreq sub-system
> >
> > + cpufreq.default_governor=
> > + [CPU_FREQ] Name of the default cpufreq governor to use.
> > + This governor must be registered in the kernel before
> > + the cpufreq driver probes.
> > +
> > cpu_init_udelay=N
> > [X86] Delay for N microsec between assert and de-assert
> > of APIC INIT to start processors. This delay occurs
> > diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
> > index 0c74a7784964..368e612145d2 100644
> > --- a/Documentation/admin-guide/pm/cpufreq.rst
> > +++ b/Documentation/admin-guide/pm/cpufreq.rst
> > @@ -147,9 +147,9 @@ CPUs in it.
> >
> > The next major initialization step for a new policy object is to attach a
> > scaling governor to it (to begin with, that is the default scaling governor
> > -determined by the kernel configuration, but it may be changed later
> > -via ``sysfs``). First, a pointer to the new policy object is passed to the
> > -governor's ``->init()`` callback which is expected to initialize all of the
> > +determined by the kernel command line or configuration, but it may be changed
> > +later via ``sysfs``). First, a pointer to the new policy object is passed to
> > +the governor's ``->init()`` callback which is expected to initialize all of the
> > data structures necessary to handle the given policy and, possibly, to add
> > a governor ``sysfs`` interface to it. Next, the governor is started by
> > invoking its ``->start()`` callback.
> > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> > index 0128de3603df..4b1a5c0173cf 100644
> > --- a/drivers/cpufreq/cpufreq.c
> > +++ b/drivers/cpufreq/cpufreq.c
> > @@ -50,6 +50,9 @@ static LIST_HEAD(cpufreq_governor_list);
> > #define for_each_governor(__governor) \
> > list_for_each_entry(__governor, &cpufreq_governor_list, governor_list)
> >
> > +static char cpufreq_param_governor[CPUFREQ_NAME_LEN];
> > +static struct cpufreq_governor *default_governor;
> > +
> > /**
> > * The "cpufreq driver" - the arch- or hardware-dependent low
> > * level driver of CPUFreq support, and its spinlock. This lock
> > @@ -1055,7 +1058,6 @@ __weak struct cpufreq_governor *cpufreq_default_governor(void)
> >
> > static int cpufreq_init_policy(struct cpufreq_policy *policy)
> > {
> > - struct cpufreq_governor *def_gov = cpufreq_default_governor();
> > struct cpufreq_governor *gov = NULL;
> > unsigned int pol = CPUFREQ_POLICY_UNKNOWN;
> >
> > @@ -1065,8 +1067,8 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy)
> > if (gov) {
> > pr_debug("Restoring governor %s for cpu %d\n",
> > policy->governor->name, policy->cpu);
> > - } else if (def_gov) {
> > - gov = def_gov;
> > + } else if (default_governor) {
> > + gov = default_governor;
> > } else {
> > return -ENODATA;
> > }
> > @@ -1074,8 +1076,8 @@ static int cpufreq_init_policy(struct cpufreq_policy *policy)
> > /* Use the default policy if there is no last_policy. */
> > if (policy->last_policy) {
> > pol = policy->last_policy;
> > - } else if (def_gov) {
> > - pol = cpufreq_parse_policy(def_gov->name);
> > + } else if (default_governor) {
> > + pol = cpufreq_parse_policy(default_governor->name);
> > /*
> > * In case the default governor is neiter "performance"
> > * nor "powersave", fall back to the initial policy
> > @@ -2320,6 +2322,9 @@ int cpufreq_register_governor(struct cpufreq_governor *governor)
> > list_add(&governor->governor_list, &cpufreq_governor_list);
> > }
> >
> > + if (!strncasecmp(cpufreq_param_governor, governor->name, CPUFREQ_NAME_LEN))
> > + default_governor = governor;
> > +
> > mutex_unlock(&cpufreq_governor_mutex);
> > return err;
> > }
> > @@ -2348,6 +2353,8 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
> >
> > mutex_lock(&cpufreq_governor_mutex);
> > list_del(&governor->governor_list);
> > + if (governor == default_governor)
> > + default_governor = cpufreq_default_governor();
> > mutex_unlock(&cpufreq_governor_mutex);
> > }
> > EXPORT_SYMBOL_GPL(cpufreq_unregister_governor);
> > @@ -2789,7 +2796,13 @@ static int __init cpufreq_core_init(void)
> > cpufreq_global_kobject = kobject_create_and_add("cpufreq", &cpu_subsys.dev_root->kobj);
> > BUG_ON(!cpufreq_global_kobject);
> >
> > + mutex_lock(&cpufreq_governor_mutex);
> > + if (!default_governor)
> > + default_governor = cpufreq_default_governor();
> > + mutex_unlock(&cpufreq_governor_mutex);
>
> I don't think locking is required here at core-initcall level.
It isn't necessary AFAICS, but it may as well be regarded as
annotation (kind of instead of having a comment explaining why it need
not be used).
More information about the Linuxppc-dev
mailing list