[PATCH] ASoC: fsl_ssi: Fix bclk calculation for mono channel

Nicolin Chen nicoleotsuka at gmail.com
Sat Jun 13 05:29:43 AEST 2020


On Tue, Jun 09, 2020 at 04:19:28PM +0800, Shengjiu Wang wrote:
> For mono channel, ssi will switch to normal mode. In normal
> mode, the Word Length Control bits control the word length
> divider in clock generator, which is different with I2S master
> mode, the word length is fixed to 32bit.
> 
> So we refine the famula for mono channel, otherwise there
> will be sound issue for S24_LE.
> 
> Fixes: b0a7043d5c2c ("ASoC: fsl_ssi: Caculate bit clock rate using slot number and width")
> Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> ---
>  sound/soc/fsl/fsl_ssi.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> index bad89b0d129e..e347776590f7 100644
> --- a/sound/soc/fsl/fsl_ssi.c
> +++ b/sound/soc/fsl/fsl_ssi.c
> @@ -695,6 +695,11 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream,
>  	/* Generate bit clock based on the slot number and slot width */
>  	freq = slots * slot_width * params_rate(hw_params);
>  
> +	/* The slot_width is not fixed to 32 for normal mode */
> +	if (params_channels(hw_params) == 1)

This function has a local variable that you can reuse here:
	unsigned int slots = params_channels(hw_params);

> +		freq = (slots <= 1 ? 2 : slots) * params_width(hw_params) *
> +		       params_rate(hw_params);

We have a small section of slots and slot_width calculation
at the top of this function where we can squash these in.


More information about the Linuxppc-dev mailing list