[PATCH 8/8] macintosh/adb-iop: Implement SRQ autopolling

[Finn Thain]

On Sun, 31 May 2020, Geert Uytterhoeven wrote:

> Hi Finn,
> 
> On Sun, May 31, 2020 at 1:20 AM Finn Thain <fthain at telegraphics.com.au> wrote:
> > The adb_driver.autopoll method is needed during ADB bus scan and device
> > address assignment. Implement this method so that the IOP's list of
> > device addresses can be updated. When the list is empty, disable SRQ
> > autopolling.
> >
> > Cc: Joshua Thompson <funaho at jurai.org>
> > Cc: Geert Uytterhoeven <geert at linux-m68k.org>
> > Tested-by: Stan Johnson <userm57 at yahoo.com>
> > Signed-off-by: Finn Thain <fthain at telegraphics.com.au>
> 
> Thanks for your patch!
> 
> Acked-by: Geert Uytterhoeven <geert at linux-m68k.org>
> 

Thanks for your tag.

> >  arch/m68k/include/asm/adb_iop.h |  1 +
> >  drivers/macintosh/adb-iop.c     | 32 ++++++++++++++++++++++++++------
> 
> As this header file is used by a single source file only, perhaps it 
> should just be absorbed by the latter?

Sure, it could be absorbed by both asm/mac_iop.h and 
drivers/macintosh/adb-iop.c but I don't see the point...

> Then you no longer need my Acked-by for future changes ;-)
> 

But you shouldn't need to ack this kind of change in the first place.

IMHO, the arch/m68k/mac maintainer should be the one to ack changes to 
both arch/m68k/include/asm/adb_iop.h and drivers/macintosh/adb-iop.c.

Not that I'm complaining (thanks again for your ack!)